Room-Temperature Magnetism Realized by Doping Fe into Ferroelectric LiTaO3

We synthesize LiTal-x FexO3-σ （LTFO） remain single phase up to x = 0.09 ceramics by the conventional solid-state reaction method. The samples The magnetic measurements show that the doping of Fe successfully realizes ferromagnetism of LTFO at room temperature. The dielectric measurements indicate that LTFO is ferroelectric, similarly to LiTaO3 （LTO）, but its ferroelectric Curie temperature seems to decrease with the increasing Fe content. By means of doping Fe ions into LTO, the coexistence of spontaneous electric polarization and spontaneous magnetic moment is realized at room temperature.     

Local stability analysis of a low-dissipation cyclic refrigerator*

We study the local stability near the maximum figure of merit for the low-dissipation cyclic refrigerator,where the irreversible dissipation occurs not only in the thermal contacts but also the adiabatic strokes.We find that the bounds of the coefficient of performance at a maximum figure of merit or maximum cooling rate in the presence of internal dissipation are identical to those in the corresponding absence of internal dissipation.Using two different scenarios,we prove the existence of a single stable steady state for the refrigerator,and clarify the role of internal dissipation on the stability of the thermodynamic steady state,showing that the speed of system evolution to the steady state decreases due to internal dissipation.     

基于数学形态学的表面原子熔融相的 STM图像识别算法

高温扫描隧道显微镜(HT-STM)可以实时原位地捕捉到表面原子的熔化相变过程.在这一原位变温实验中,快速可靠地识别出每帧STM图像中的熔融相十分关键.传统的手工统计方法存在效率低下、随意性大等问题.我们发展出一套基于数学形态学的算法,来自动快速地识别.与人工方法相比,该算法消除了人为主观误差,使确定的边界更加准确、光滑,处理效率提高了266倍.     

Prospective study on observations of γ-ray sources in the Galaxy using the HADAR experiment

The High Altitude Detection of Astronomical Radiation (HADAR) experiment is a refracting terrestrial telescope array based on the atmospheric Cherenkov imaging technique. It focuses the Cherenkov light emitted by extensive air showers through a large aperture water-lens system for observing very-high-energy γ-rays and cosmic rays. With the advantages of a large field-of-view (FOV) and low energy threshold, the HADAR experiment operates in a large-scale sky scanning mode to observe galactic sources. This study presents the prospects of using the HADAR experiment for the sky survey of TeV γ-ray sources from TeVCat and provids a one-year survey of statistical significance. Results from the simulation show that a total of 23 galactic point sources, including five supernova remnant sources and superbubbles, four pulsar wind nebula sources, and 14 unidentified sources, were detected in the HADAR FOV with a significance greater than 5 standard deviations (σ). The statistical significance for the Crab Nebula during one year of operation reached 346.0 σ and the one-year integral sensitivity of HADAR above 1 TeV was ~1.3%–2.4% of the flux from the Crab Nebula.     

Spin Transport in a Rashba Ring-Quantum Dot System Pumped by Microwave Fields

We report a theoretical study on producing electrically spin-polarized current in the Rashba ring with parallel double dots embedded, which are subject to two time-dependent microwave fields. By means of the Keldysh Green's function method, we present an analytic result of the pumped current at adiabatic limit and demonstrate that the interplay between the quantum pumping effectand spin-dependent quantum interference can lead to an arbitrarily controllable spin-polarized current in the device. The magnitude and direction of the charge and spin current can be effectively modulated by system parameters such as the pumping phase difference, Rashba precession phase, and the dynamic phase difference of electron traveling in two arms of ring; moreover, thespin-polarization degree of the charge current can also be tuned in the range [-∞, +∞]. Our findings may shed light on the all-electric way to produce the controllable spin-polarized charge current in the field of spintronics.     

二极管泵浦激光器中泵浦光分布对激光器模式影响程度的计算方法

在激光器中,通常泵浦光呈不均匀分布,由此引起介质的增益也相应地出现不均匀分布,导致振荡光通过增益区时其分布发生变化。提出一种计算不均匀的泵浦光分布对于激光器内振荡光模式的影响程度,可以近似获得振荡光对原来场分布偏离的百分比的方法。在此基础上,对准连续运转的三向侧面泵浦激光器进行研究,分析不均匀泵浦光分布对振荡光场影响的规律。结果表明:当泵浦功率增加或谐振腔内损耗增加时,振荡光通过增益区时对原来分布的偏离程度也同时增加,呈单调变化关系;泵浦光不均匀分布对振荡光场的影响,与其沿振荡光轴向上的分布无关,仅仅取决于其在与振荡光垂直方向上的不均匀分布程度。通过计算还获得了此类效应的数量级,在2 000 W泵浦功率条件下,这种影响仅使振荡光偏离理想分布不到4%,而泵浦功率达到6 000 W时这种偏离则高达20%以上。     

Mn4+掺杂的新型铝酸盐红色长余辉材料

用高温固相法合成了红色长余辉发光材料LiAl₅O₈:Mn⁴⁺,Li₅AlO₄:Mn⁴⁺,LiAlO₂:Mn⁴⁺,发现前两种材料有红色余辉,这方面并没有报道过,并对这两种材料的发光性能作了研究,指明了不同基质中发光强弱不同原因。对不同Mn⁴⁺掺杂浓度的材料做了浓度依赖关系研究,确认Mn⁴⁺的发光是²E→⁴A₂的跃迁。Mn⁴⁺的发光是个宽带谱,材料在紫外区有强的吸收,发射谱范围可达620~770nm,峰值在675nm。对长余辉机制进行了探讨。     

SiN团簇光电子能谱的指认

应用含时密度泛函理论研究了SiN团簇低能激发态的性质.将计算结果与前人已有的计算结果进行了比较，此外还根据计算得到的低能激发能对SiN^-阴离子的光电子能谱进行了理论指认.研究表明，SiN^-阴离子的基态为¹Σ态，而光电子能谱上的X峰和A峰分别对应于¹Σ→²Σ和¹Σ→²Π的跃迁.研究结果还表明，用含时密度泛函的方法来处理激发态的问题是成功的. 关键词： 团簇 光电子能谱 基态 激发态     

熔石英后表面坑点型划痕对光场调制的近场模拟

建立了坑点型划痕的旋转抛物面模型, 用三维时域有限差分方法研究了熔石英后表面坑点型划痕随深度、 宽度、 间距以及酸蚀量变化对波长λ =355 nm入射激光的调制.研究表明, 这类划痕调制最强区位于相邻两坑点的连接区, 且越靠近表面调制越强.当其宽深比为2.0---3.5、 坑点间距约为坑点宽度的1/2时, 可获得最大光场调制, 最大光强增强因子(LIEF)为11.53; 当坑点间距大于坑点宽度时, 其调制大为减弱, 相当于单坑的场调制.对宽为60δ (δ =λ/12), 深和间距均为30δ的坑点型划痕进行刻蚀模拟, 刻蚀过程中最大LIEF为11.0, 当间距小于300 nm时, 相邻坑点由于衍射形成场贯通.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.