Uniformly Dispersed and Controllable Ligand‐Free Silver‐Nanoparticle‐Decorated TiO2 Nanotube Arrays with Enhanced Photoelectrochemical Behaviors

Homogeneously dispersed silver nanoparticles (AgNPs) were successfully decorated onto the surface of TiO₂ nanotube arrays (TNTA) by means of an in situ photoreduction method. TNTA films as supports exhibit excellent properties to prevent agglomeration of AgNPs, and they also avoid using polymer ligands, which is deleterious to enhancing the properties of the fabricated NPs. The silver particle size and its content could be controlled just by changing the immersion time. Detailed SEM and TEM analyses combined with energy‐dispersive X‐ray spectroscopy analyses with different immersion times (5, 10, 30, 60 min) have revealed the variation tendency. The prepared Ag/TNTA composite films were also characterized by XRD, X‐ray photoelectron spectroscopy, and high‐resolution TEM. The UV/Vis diffuse reflectance spectra displayed a redshift of the absorption peak with the growth of AgNPs. The photocurrent response and the photoelectrocatalytic degradation of methyl orange (MO) were used to evaluate the photoelectrochemical properties of the fabricated samples. The results showed that the photocurrent response and photoelectrocatalytic activity largely depended on the loaded Ag particle size and content. TNTA films with a diameter of 17.92 nm and silver content of 1.15 at % showed the highest photocurrent response and degradation rate of MO. The enhanced properties could be attributed to the synergistic effect between AgNPs and TiO₂. To make good use of this effect, particle size and silver content should be well controlled to develop the electron charge and discharge process during the photoelectrical process. Neither smaller nor larger AgNPs caused decreased photoelectrical properties.     

Keggin杂多酸负载型催化剂研究及在有机合成中的应用

评述了负载型杂多酸Keggin结构催化剂的制备、表征及其表面作用机理, 阐述了在非均相催化酯化反应、Friedel-Crafts烷基化和酰基化反应、选择氧化、不对称催化反应、异构化反应、缩合反应、裂解反应、水合反应、脱水反应、水解反应、重排反应、Diels-Alder反应及醚化反应等作为探针反应的催化性能, 总结了重排反应、醇氧化等不同类型催化反应的反应机理和催化剂失活的主要原因以及影响负载型催化剂水热稳定性能的因素, 指出了负载型杂多酸Keggin结构催化剂研究中有待解决的问题及今后的发展方向..     

苯并咪唑衍生物的“关-开”型连续性荧光探针检测Cu2+和S2O72-

以胺甲基苯并咪唑和水杨醛为原料设计合成了一个苯并咪唑衍生物荧光探针,通过荧光分光光度法和紫外分光光度法探寻其对常见阴阳离子的选择性识别性能。研究结果表明,Cu2+对合成得到的苯并咪唑衍生物具有荧光猝灭——"关"的作用,而S2O72-对该荧光猝灭体系具有荧光恢复——"开"的作用。据此,提出了具有实现对Cu2+,S2O72-的荧光"关-开"型探针.     

Cl-离子修饰Ce3+掺杂SiO2材料发光峰的蓝移

采用溶胶凝胶技术通过添加Ce(NO3)3制备了掺杂Ce3 离子的纳米SiO2材料,进行了不同温度的氯化处理。采用电子能谱、吸收光谱以及荧光光谱对Cl-离子修饰Ce3 掺杂SiO2材料的成分及光学性能进行分析、测试,研究Cl-离子修饰对掺杂SiO2材料中Ce3 离子光学性能的影响。测试结果表明,经过氯化处理不仅可以明显提高Ce3 离子掺杂SiO2材料的发光强度,还可以使发光和激发波长产生明显的变化,发光波长由445 nm蓝移至390 nm,激发波长由326 nm蓝移至290 nm左右。这种转化具有可逆性,将经氯化处理的样品重新在空气中处理后,发光强度减弱,发光和激发波长也恢复到氯化处理前的位置。     

结构振动强度的应用研究

本文根据弯曲波理论和声强测量原理提出了结构振动能量分布和传输特性的新技术方法.理论分析、实验室研究和实际应用结果表明,用振动强度来分析结构振动问题可得到振动能量的流向和分布,测量技术简单且易于掌握,具有可接受的实际应用精度.     

围压下泥岩断裂韧性测试与解释方法

根据围压条件下的断裂力学理论 ,采用双翼裂纹厚壁圆筒 ,对泥岩进行了不同围压和不同泥质含量条件下的人工岩样断裂韧性测试。建立了有限元方法解释断裂韧性的数值模型。在进行大量实验测试的基础上 ,通过回归分析表明 ,断裂韧性与围压、泥质含量有较好的线性统计关系。解决了水力压裂设计中断裂韧性参数的准确获取问题 ,有利于提高压裂设计、预测的精度     

Stable superhydrophobic surface with hierarchical mesh-porous structure fabricated by a femtosecond laser

Inspired by the lotus leaf, a new superhydrophobic surface with hierarchical mesh-porous structure is fabricated by femtosecond laser irradiation on silicon. The fabricated surface shows a superhydrophobic character with water contact angle being found to reach up to 158^°±1^° and sliding angle of 4^°±0.5^°. The superhydrophobicity is stable even if the PH of solution changes from 1 to 14. And the surface also exhibits excellent self-cleaning effect and bouncing behavior, implying that the adhesion of the surface is extremely low. This work will enhance further understanding of the wettability of a solid surface with special surface morphology.     

On Lp-boundedness of Fourier Integral Operators

Potential Analysis - In this paper, we get an Lp boundedness of Fourier integral operators with rough amplitude $a\in L^{\infty } S^{m}_{\varrho },~$ and phase $\varphi \in L^{\infty }{\Phi }^{2}$...     

N-methyl-2-pyrrolidonium-based Brönsted-Lewis acidic ionic liquids as catalysts for the hydrolysis of cellulose

We experimentally studied the catalytic performances of a series of Br?nsted-Lewis acidic N-methyl-2-pyrrolidonium metal chlorides([Hnmp]Cl/MCl_x, where M=Fe, Zn, Al, or Cu) for the hydrolysis of microcrystalline cellulose(MCC) and cotton to produce reducing sugar. A variety of factors, such as temperature, time, ionic liquid(IL) species, IL dosage, and the concentration of the metal chloride were investigated. [Hnmp]Cl/FeCl_3 presented the best hydrolysis performance, affording a 98.8% yield of total reducing sugar from MCC(1 h, 100 °C, 0.1 g MCC, 0.2 g acidic IL, 2.0 g [Bmim]Cl as solvent), which is better than or comparable to results previously obtained with other –SO_3H functionalized acidic ILs. The hydrolysis performances of [Hnmp]Cl/MClx were rationalized using density functional theory calculations, which indicated that interactions between the metal chlorides and the cellulose, including charge-transfer interactions are important in the hydrolysis of cellulose and degradation of glucose. This work shows that Br?nsted-Lewis acidic ILs are potential catalysts for the hydrolysis of cellulose to produce sugar.