Influence of Co–Zr substitution on coercivity in Ba ferrites

Polycrystalline BaCo_xZr_xFe_11.5−2xO_18.25 samples with 0?x?0.6$0?x?0.6$ ions per formula units were prepared by modified citrate precursor method with the initial ratio of Ba:Fe equal to 1:11.5. The cationic site preferences of Co²⁺ and Zr⁴⁺ in Co–Zr substituted Ba ferrite were investigated by magnetic measurements and X-ray diffractometer (XRD) analysis. The coercivity H_c was decreasing with increasing Co–Zr substitution. The datum showed that the max coercive force (H_c) was obtained when substitution of 0.2, while the best saturation magnetizations (M_s) was obtained when substitution of 0.4.     

Strain relaxation and surface morphology of high indium content InAlAs metamorphic buffers with reverse step

Low-temperature step-graded high indium content InAlAs (In% = 0.75) metamorphic buffer layers with reverse step layer grown on GaAs substrate by molecular beam epitaxy are investigated in this paper. The composition and the strain relaxation of the top InAlAs layer are determined by high-resolution triple-axis X-ray diffraction measurements, which show that the top InAlAs layer is nearly fully relaxed and the growth parameters for these samples have little influence on the strain relaxation ratio. Surface morphology is observed by reflection high-energy electron diffraction pattern and atomic force microscopy. The surface morphology is found to depend strongly on both the growth temperature and the As flux. Compared with other samples, the sample growth under the optimized conditions has the smallest value of root mean square surface roughness. Furthermore, the ω − 2θ and ω scans of the triple-axis X-ray diffraction and transmission electron microscopy result also show the sample grown under the optimized conditions has good crystalline quality.     

Influence of network structure on rumor propagation

Rumor propagation in complex networks is studied analytically and numerically by using the SIR model. Analytically, a mean-field theory is worked out by considering the influence of network topological structure and the unequal footings of neighbors of an infected node in propagating the rumor. It is found that the final infected density of population with degree k   is ρ(k)=1−exp(−αk)$\rho (k)=1-\exp (-\alpha k)$, where α is a parameter related to network structure. The number of the total final infected nodes depends on the network topological structure and will decrease when the structure changes from random to scale-free network. Numerical simulations confirm the theoretical predictions.     

In-band pumped Er:YAG ceramic laser with 11 W of output power at 1645 nm

We report on a high power polycrystalline Er:YAG ceramic laser in-band pumped by a cladding-pumped Er, Yb fiber laser wavelength locked at 1532 nm with a volume Bragg grating. Using 1.0 at % Er³⁺-doped ceramic as the gain medium and an output coupler of 10% transmission, the laser had a threshold pump power of ∼1.5 W and generated 11 W of continuous-wave output at 1645 nm for 23.3 W of incident pump power at 1532 nm, corresponding to a slope efficiency with respect to incident pump power of 51%.     

电离层与卫星通信

利用电子流体动力学方程和麦克斯韦方程组推导了等离子体的特征频率、折射率，并讨论了电磁波在等离子体中传播的基本条件，从而得出了卫星通信的基本电磁学条件．     

Effects of doping Na on the structure and physical properties of La2/3Ca1/3MnO3

Effects of doping Na on the structure, electrical and magnetic properties of La_2/3Ca_1/3MnO₃ are investigated. A structural phase transition from orthorhombic to rhombohedral structure takes place at y=0.375. All samples show metal-insulator (M-I) transition at the transition temperature and undergo the transition from paramagnetism to ferromagnetism at the Curie temperature T_C. and T_C increase monotonically with increasing Na content. However the Na-doped samples have a shoulder in their electrical transport curves found below and shows a widened magnetic transition process. On the other hand, intrinsic colossal magnetoresistance (CMR) peaks are observed in all the samples, but samples with y around 0.25 show two MR peaks which can be attributed to magnetic inhomogeneity induced by the doped Na⁺ ions. Here we propose a method to broaden the CMR peak of perovskite manganite, which is beneficial for practical applications.     

Coaxial ZnO/SiO<Subscript>2</Subscript> nanocables fabricated by thermal evaporation/oxidation

ZnO/SiO₂ coaxial nanocables have been synthesized on silicon substrates by simply evaporating zinc powder under an argon and argon/oxygen mixed atmosphere sequentially. The diameters of these nanocables vary from 50 to 100 nm and the lengths up to several millimeters. Electron microscopy and chemical composition investigations reveal that the nanocable consists of a crystalline ZnO core surrounded by an amorphous silica sheath. The electron diffraction pattern proves that the long-axis direction of ZnO cores grows along the [0001] direction. Silica nanotubes with wall structures have been obtained by the selective dissolution of the cores with hydrochloric acid. PACS 81.10.Bk; 81.05.Hd     

约瑟夫森结的混沌行为及其在保密通信中的应用

约瑟夫森结的混沌行为在研究和应用方面都具有重要的价值。电阻-电容-电感并联约瑟夫森结在直流电流的驱动下会出现混沌行为,采用数值计算的方法,对混沌行为进行了研究。通过电压波形、频谱、对初始条件的敏感依赖以及奇怪吸引子,证实了混沌的存在,在此基础上首次提出了基于约瑟夫森结混沌行为的保密通信方案。     

Target tracking in infrared imagery using a novel particle filter

To address two challenging problems in infrared target tracking, target appearance changes and unpre- dictable abrupt motions, a novel particle filtering based tracking algorithm is introduced. In this method, a novel saliency model is proposed to distinguish the salient target from background, and the eigenspace model is invoked to adapt target appearance changes. To account for the abrupt motions efficiently, a two- step sampling method is proposed to combine the two observation models. The proposed tracking method is demonstrated through two real infrared image sequences, which include the changes of luminance and size, and the drastic abrupt motions of the target.     

Zinc-ion implanted and deposited titanium surfaces reduce adhesion of Streptococccus mutans

While titanium (Ti) is a commonly used dental implant material with advantageous biocompatible and mechanical properties, native Ti surfaces do not have the ability to prevent bacterial colonization. The objective of this study was to evaluate the chemical composition and bacterial adhesive properties of zinc (Zn) ion implanted and deposited Ti surfaces (Zn-PIIID-Ti) as potential dental implant materials. Surfaces of pure Ti (cp-Ti) were modified with increasing concentrations of Zn using plasma immersion ion implantation and deposition (PIIID), and elemental surface compositions were characterized by X-ray photoelectron spectrometry (XPS). To evaluate bacterial responses, Streptococcus mutans were seeded onto the modifiedTi surfaces for 48 h and subsequently observed by scanning electron microscopy. Relative numbers of bacteria on each surface were assessed by collecting the adhered bacteria, reculturing and counting colony forming units after 48 h on bacterial grade plates. Ti, oxygen and carbon elements were detected on all surfaces by XPS. Increased Zn signals were detected on Zn-PIIID-Ti surfaces, correlating with an increase of Zn-deposition time. Substantial numbers of S. mutans adhered to cp-Ti samples, whereas bacterial adhesion on Zn-PIIID-Ti surfaces signficantly decreased as the Zn concentration increased (p < 0.01). In conclusion, PIIID can successfully introduce Zn onto a Ti surface, forming a modified surface layer bearing Zn ions that consequently deter adhesion of S. mutans, a common bacterium in the oral environment.