混沌光场光子统计分布及二阶相干度的分析与测量

利用通信波段双通道单光子探测器,采用Hanbury Brown-Twiss关联测量方案,理论分析并实验测量了光反馈半导体激光器产生的混沌光场的光子统计分布及不同混沌状态光场的二阶相干度.通过对混沌光场二阶相干度g~((2))(τ)的理论分析,得出随着延迟时间和相干时间的变化,其与相干光、热光及单光子态的二阶相干度可明显区分并呈现出不同分布.同时实验上产生了频谱宽度6.7 GHz的混沌光场,测量了不同光子数分布的结果,并用高斯随机分布、泊松分布、玻色-爱因斯坦分布对光子数分布进行理论拟合,发现随着入射平均光子数的增加,光子数分布从玻色-爱因斯坦分布过渡到泊松分布,但整个过程都与高斯随机分布符合较好,且光场的二阶相干度g~((2))(0)由2降至1.通过改变偏置电流(I=1.0Ith-2.0Ith)和反馈强度(0—10%),实验上研究了混沌光场由低频起伏到相干塌陷的过程中不同状态宏观动力学特性与二阶相干度的对应关系.结果表明:混沌光场在此过程中始终呈现出明显的聚束效应,并在频谱宽度最大时达到最强;同时给出了光子计数测量中聚束效应减弱的物理原因.实验表明该系统及方法能很好地揭示不同状态混沌光场的光子统计特性.     

嵌入式三色光变器

为了提升现有导模共振防伪光变器件的性能,设计了一种基于ZnS覆盖膜的一维单周期矩形结构三色光变器.当自然光入射角为45°时,可在0°,58°,90°方位角分别获得相应的蓝、绿、红三色反射峰,对研究结果进行了物理解释.分析并提出了该器件周期、槽深、膜厚以及入射角变化对反射峰的影响规律,对器件的设计、制作和测试有重要指导作用.三色光变器基于简单结构实现方位角调节的自然光三色光变效果,可运用传统激光全息产业的模压和蒸镀工艺进行制作,在光变图像防伪领域有重要应用.     

同轴结构中压力波法测量空间电荷分布的物理模型研究

从压力波法测量平板样本中空间电荷分布的理论分析出发,提出了对于同轴结构的固体电介质中空间电荷分布的压力波法测量的物理模型,并得出了测量电流的解析的数学表达式.依据泊松方程,考虑样品内的电场强度、介电常数和空间电荷密度随外界声波扰动而发生变化,将圆柱试样受到的压力波的影响分解成样品形变和质点位移两部分,进而得到了以同轴结构中空间电荷分布的压力波法测量的电压与电流表达式.测量电流的数学表达式表明,对于同轴结构,压力波法的测量电流信号不像平板结构中那样基本正比于空间电荷分布,而是应该做进一步的修正处理.     

多量子比特核磁共振体系的实验操控技术

随着量子信息与量子计算科学的发展,量子信息处理器被广泛地用于量子计算、量子模拟、量子度量等方面的研究.为了能在实验上实现这些日益复杂的方案,将量子计算机的潜能转化成现实,需要不断提高可操控的量子体系比特位数,实现更复杂的量子操控.核磁共振自旋体系作为一个优秀的量子实验测试平台,提供了丰富而又精密的量子操控手段.近几年来在此平台上进行了不少的多量子比特实验,发展并积累了一系列的多量子比特实验技术.本文首先阐述了核磁共振体系多量子比特实验中的实验困难,然后结合7量子比特标记赝纯态制备以及其他有关实验,对多比特实验过程中应用到的实验技术进行介绍.最后对核磁共振体系多量子比特实验技术方向的进一步研究进行了总结和展望.     

Br_2分子在360—610 nm的光解离动力学研究

利用包含转动自由度在内的含时薛定谔方程研究了Br_2分子在波长范围为360—610 nm的光解离动力学.通过计算得到了Br_2分子在四个特征波长处的切片解离影像,并经过分析得到了与切片解离影像相对应的动能分布;计算了Br_2分子在波长范围为360—610 nm内总的动能分布,以及从A,B和C三个电子态解离的碎片各自所对应的动能分布;计算了A,B和C三个电子态各自的解离概率以及碎片产物的分支比Γ(Br~*/(Br+Br~*))随波长的变化.     

Physicochemical properties of nanoparticles affect translocation across pulmonary surfactant monolayer

Interaction between nanoparticles (NPs) and pulmonary surfactant monolayer is one of the most important parts in NP-based pulmonary drug delivery system, which can affect the result of the inhaled nano-drugs and their potential efficacy. Here, we show how surface charge of NPs affects translocation across pulmonary surfactant monolayer with coarse-grained molecular dynamics simulations. The results reveal that the surface charge position of NPs can determine the fate of the inhaled NPs about whether they can have the ability of translocation across the pulmonary surfactant monolayer, which is that NPs with face surface charge can penetrate the pulmonary surfactant monolayer and NPs with edge surface charge cannot. Besides, dynamic process, phase state and the potential of mean force profiles further confirm this result. Moreover, compared to anionic NPs, there is a greater chance for cationic NPs to be adsorbed on the surface of the pulmonary surfactant monolayer, which can further decrease the thickness of the pulmonary surfactant monolayer and reduce the distance between charged NPs and the pulmonary surfactant monolayer. Our researches provide a novel simulation model of NPs on translocation across pulmonary surfactant monolayer and the study of NP-based pulmonary drug delivery system should consider the surface charge of NPs.     

Experimental and numerical investigation on the exergy and entransy performance of a novel plate heat exchanger

There has been increased attention on various types of plate heat exchangers because of their high efficiency and compactness. This article presents an investigation of heat transfer and fluid flow performance of a novel plate heat exchanger based on numeric studies and experimental tests. Parameters of the novel plate heat exchanger are analyzed and discussed. The thermo-hydraulic transfer performance of different plate heat exchangers is comprehensively analyzed using the exergy and entransy principle. The results indicate that the novel plate heat exchanger has better thermo-hydraulic transfer performance than the smooth plate heat exchanger. The result of this study provides a paradigm for the optimal design of plate heat exchangers.     

Experimental and numerical study of the effect of conjugate heat transfer on film cooling

Combined convection heat transfer and thermal conduction for film cooling of a flat plate with 45° ribs on one wall was investigated experimentally and numerically. The flat plate surface temperature was measured using thermochromic liquid crystals. The results show that the film cooling is the main mechanism for the local cooling with a very low thermal conductivity while the convection heat transfer of the coolant in the coolant channel is the dominant heat transfer mechanism for the high thermal conductivity plate, with both film cooling and convection heat transfer by the coolant being important with medium thermal conductivity walls.     

A highly Selective Fluorescent Sensor for Monitoring Cu<Superscript>2+</Superscript> Ion: Synthesis,Characterization and Photophysical Properties

A new fluorescent sensor, 4-allylamine-N-(N-salicylidene)-1,8-naphthalimide (1), anchoring a naphthalimide moiety as fluorophore and a Schiff base group as receptor, was synthesized and characterized. The photophysical properties of sensor 1 were conducted in organic solvents of different polarities. Our study revealed that, depending on the solvent polarity, the fluorescence quantum yields varied from 0.59 to 0.89. The fluorescent activity of the sensor was monitored and the sensor was consequently applied for the detection of Cu²⁺ with high selectivity over various metal ions by fluorescence quenching in Tris-HCl (pH = 7.2) buffer/DMF (1:1, v/v) solution. From the binding stoichiometry, it was indicated that a 1:1 complex was formed between Cu²⁺ and the sensor 1. The fluorescence intensity was linear with Cu²⁺ in the concentration range 0.5–5 μM. Moreso, the detection limit was calculated to be 0.32 μM, which is sufficiently low for good sensitivity of Cu²⁺ ion. The binding mode was due to the intramolecular charge transfer (ICT) and the coordination of Cu²⁺ with C = N and hydroxyl oxygen groups of the sensor 1. The sensor proved effective for Cu²⁺ monitoring in real water samples with recovery rates of 95–112.6 % obtained.     

High-Power Diode-End-Pumped Slab Composite Tm:YLF Compact Laser

We design a continuous-wave Tm:YLF laser with a composite slab crystal end-pumped by two fiber-coupled laser diodes at room temperature. We achieve a maximum continuous wave output power of 105 W for the bonded slab Tm:YLF laser; the corresponding slope efficiency is 47.7% and the optical-to-optical conversion efficiency is 42.0% with respect to the incident pump power. The laser operated at 1,907.5 nm with a beam quality factor of M² ～3.2 at the highest output power.