Precursor Based on Polyborylborazine for BN Fiber: Preparation and Rheology Properties

A polyborylborazine precursor for hexagonal boron nitride (h-BN) was obtained by reaction of boron trichloride with methylamine and its structure was characterized by ¹¹BNMR, ¹³CNMR, ¹HNMR, and FTIR. The results show that the molecular precursor consists of borazine rings connected via a cross-linked network. The results of shear rheological tests indicated that the polymer is capable of being melt spun at moderate temperature, which implies that the structure of the molecular chains of the precursor polymer is branched. The precursor polymer was spun into a continuous polymer fiber in the melt state and then subsequently heat-treated under NH₃ up to 1000°C for conversion into BN fibers. Its surface morphology was observed by scanning electron microscopy (SEM); the fiber was free of defects and cavities.     

Effect of Temperature and Comonomer Content on Thermal Behavior and Crystallization Property of the Propylene–Ethylene Random Copolymers

The effects of ethylene units content and crystallization temperature on the conformations, and the thermal and crystallization behavior were investigated by a combination of Fourier transform infrared (FTIR) spectroscopy, wide angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). The characterization of FTIR spectroscopy proves that the longer helical conformation sequences of the propylene–ethylene random (PER) samples decrease, whereas the shorter helical conformation sequences increase with the increase in ethylene units content. The increase of the shorter helical conformation sequences is favorable for the formation of the γ-phase in the crystals. A group of broad endothermic peaks can be seen clearly in the DSC curves of PER copolymers, which may be associated with the melting of mixtures of the α- and γ-forms in the crystals. The melting point, crystallization temperature, and crystallinity degree of the PER copolymers decrease with the increase in ethylene units contents. Three typical melting peaks of the PER copolymers crystallized isothermally between 80°C and 130°C were observed. The two higher melting peaks result from melting of the α- and γ-phase in the crystals, whereas the materials crystallized on quenching give the lowest peak. The WAXD results confirm that the PER copolymers crystallize from the melt, as mixtures of α and γ forms, in a wide temperature range. The critical number ζ_lim of the crystallizable units for the α-form increases with the increase in crystallization temperature for PER copolymers, which is favorable for the formation of the γ phases. The amount of γ-form increases with the increase in crystallization temperature at the expense of its α component, then reaches a maximum value at the crystallization temperature of 115°C, and finally decreases with further increase in the crystallization temperature.     

Hybrid Particle–Continuum Simulations of Polymer Brushes in Shear Flow

A hybrid particle–continuum method is used to study the shear flow confined between two opposing walls, one of which is coated with polymer chains. Molecular dynamics (MD) is used in the particle region near the brush and Navier–Stokes (NS) equations are applied in the remaining region where the continuum assumption holds. The information exchange from the continuum region to the particle region is implemented using the constrained particle dynamics. Both Couette shear flow and oscillatory flow are considered in the present work. The effect of the shear flow on the conformational characteristics of polymer brushes is analyzed. In the overlap region, the velocities obtained from MD simulations are smoothly connected with those from NS equations. Our investigations demonstrate that the hybrid particle–continuum model is valid in exploring the shear behavior of polymer brushes.     

Modified Spectral Neugebauer Model for Printer Characterization

Spectral Neugebauer model is widely used for spectral reflectance prediction during printer characterization. However, several factors reduce the predication precision. Thus, an improved cellular Yule-Nielson spectral Neugebauer (CYNSN) model is proposed, which modifies the traditional spectral Neugebauer model in three main aspects: (1) First, in order to adjust the nonlinearities between the predicated and measured spectral reflectance, an iteratively calculated Yule-Nielson exponent is added to the reflectance values within the Neugebauer equations. (2) Second, the quantity of Neugebauer primaries is increased by dividing the CMY colorant space into 4³ uniform cellular subdomains. (3) Third, the mapping functions are developed to map the area coverages' theoretical values to their effective values within the subdomains, and the mapped values highly improve the matching degree of the predicated and measured reflectance values. In the experiment, four related spectral Neugebauer models are employed during printer characterization, which are the traditional spectral Neugebauer model, Yule-Nielson spectral Neugebauer (YNSN) model, traditional CYNSN model, and the modified CYNSN model, respectively. And the experimental results show the modified CYNSN model yields a significant improvement over the other spectral Neugebauer models, by comparing the characterization errors in the form of colorimetry and spectroscopy.     

Investigation of formation mechanism of Ti3SiC2 by high pressure and high-temperature synthesis

ABSTRACT

In this paper, synthesis of titanium silicon carbide (Ti₃SiC₂) under high pressure and high-temperature condition has been investigated by using the reactant systems Ti/Si/C, Ti/SiC/TiC, Ti/SiC/C and Ti/TiC/Si. Results reveal that Ti/TiC/Si is unsuited to the synthesis of Ti₃SiC₂ under a high pressure of 2.0?GPa, while an elemental mixture of Ti/Si/C is applicable. By the addition of Al, Ti₃SiC₂ with 95.8?wt% purity was obtained from elemental mixture with a large excess of silicon. The optimum experimental parameters were determined as Ti/Si/Al/C having the molar ratio of 3:1.5:0.5:1.9, holding at 2.0?GPa and 1300?°C for 60?min.     

Effects of γ rays irradiation on structure and property of TiO2 thin films

TiO₂ thin films were deposited on a glass substrate by the radio frequency magnetron sputtering method, and annealed for 2 h at temperatures of 550°C. Then, ⁶⁰Co γ rays with different doses were used to irradiate the resulting TiO₂ thin films. The surface features of films before and after irradiation were observed by scanning electron microscope (SEM). Simultaneously, the crystal structure and optical properties of films before and after irradiation were studied by X-ray diffraction (XRD), UV–VIS transmission spectrum and Photoluminescence (PL) spectrum, respectively. The SEM analysis shows that the film is smooth with tiny particles on the film surface, and non-crystallization trend was clear after irradiated with γ rays. The XRD results indicated that the structure of the film at the room temperature mainly exists in the form of amorphous and mixed crystal at a sputtering power of 200 W, and non-crystallinity was more obvious after irradiation. Obvious difference can be found for the transmissibility of the irradiated and pre irradiation TiO₂ films by the UV-VIS spectra. The color becomes light yellow, and the new absorption edge also appeared at about 430 nm. PL spectra and photocatalysis experiments indicate that the photocatalysis degradation rate of the TiO₂ films on methylthionine chloride solution irradiated with the maximum dose can be increased to 90%.     

The distribution of square-full integers

Let , wheref(n) is the characteristic function of square-full integers. A formula is proved that can be used to obtain better upper bound estimate for (x). We get (x)=O(x ^5/33+), which improves the exponent 11/72 obtained by R. Blasubramania and K. Ramachandra.     

On the Average of Exponents

ＯｎｔｈｅＡｖｅｒａｇｅｏｆＥｘｐｏｎｅｎｔｓＣａｏＨｕｉｚｈｏｎｇ（曹惠中）（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｈｅｍａｔｉｃｓ，ＳｈａｎｄｏｎｇＵｎｉｖｅｒｓｉｔｙ，Ｊｉｎａｎ２５０１００）Ａｂｓｔｒａｃｔ：Ｌｅｔｎ＞１ａｎｄｂｅｔｈｅｐｒｉｍｅｆａ...     

PERTURBATION OF A_0 ~+h

Let Z be a topological space and mapping A2 :Z→B(H) with closed range R(A2 ) be continuous . Some necessary and sufficient conditions of the continuity of M-P inverses A z+ are given in [1], [2]. It is one of them that AZ+ is continuous if ana only if AZ+ is locallybounded. In this paper, we discuss the following problem: if limA n = A0 in B(H) and ||An+||is unbounded (i.e. the above necessary and sufficient condition fails), what h in H will make the equations: limAm+ h = A0+ h or w-limAn+ h= A 0+ h be true. For this purpose three theorems and an error estimation are given in this paper.     

THE NBELC AND NWELC CLASSES OF LIFE DISTRIBUTIONS

ＴＨＥＮＢＥＬＣＡＮＤＮＷＥＬＣＣＬＡＳＳＥＳＯＦＬＩＦＥＤＩＳＴＲＩＢＵＴＩＯＮＳ￥ＣＡＯＪＩＮＨＵＡ；ＷＡＮＧＹＵＥＤＯＮＧ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＭａｔｈｅｍａｔｉｃｓ，ＣｈｉｎｅｓｅＡｃａｄｅｍｙｏｆＳｃｉｅｎｃｅ，Ｂｅｉｊｉｎ...