Syntheses of Some Organic Fluorescent Dyes for Security Tickers

Five organic fluorescence dyes were synthesized by two- or three-step reactions. These synthetic meth-ods have an advantage of the simple processes, low costs and high yields. The compositions of the five compounds are characterized by IR, ^1H NMR, elemental analyses and fluorescence spectroscopies. The quantum yields of fluorescence were measured.     

Monte Carlo simulation of magnetic nanostructured thin films

Using Monte Carlo simulation, we have compared the magnetic properties between nanostructured thin films and two-dimensional crystalline solids. The dependence of nanostructured properties on the interaction between particles that constitute the nanostructured thin films is also studied. The result shows that the parameters in the interaction potential have an important effect on the properties of nanostructured thin films at the transition temperatures.     

Synchronization of chaotic systems based on adaptive observer design

The synchronizing problem of a chaotic system is investigated based on the observer design. The nonlinear section is assumed to satisfy the Lipschitz condition. Firstly, the normal observer is designed based on the known Lipschitz constant and the results are given in linear matrix inequality (LMI) form. Then a fairly simple adaptive observer is designed with the Lipschitz constant unknown. Simulations on synchronizing the Lorenz system are investigated and the results show the validity and feasibility of our main results.     

Study of the selective catalysis of metalloporphyrins for 2-methyl-butane oxidation with PhIO under mild conditions

Nine ironporphyrins and eight manganeseporphyrins were synthesized, and their selective catalysis for the oxidation of the secondary and tertiary carbon–hydrogen bonds of 2-methyl-butane with PhIO was studied. The proportion of the oxidation product of tertiary carbon–hydrogen bond to the one of secondary carbon–hydrogen bond was 3:1 when ironporphyrins were used as catalysts, and 2.3:1 when manganeseporphyrins were used as catalysts. The research showed that the substituting groups on the porphyrin rings influenced the catalytic selectivity of metalloporphyrins for the oxidation of the secondary and tertiary carbon–hydrogen bonds as well as the reaction yields. The electron-attracting groups on benzene rings of ironporphyrins increased the catalytic selectivity of ironporphyrins for the tertiary carbon–hydrogen bond oxidation and the reaction speeds, and the electron-releasing groups increased the catalytic selectivity for secondary carbon–hydrogen bond oxidation and reduced the reaction speeds. Both electron-attracting and -releasing groups on benzene rings of manganeseporphyrins enhanced the catalytic selectivity of manganeseporphyrins for the secondary carbon–hydrogen bond oxidation.     

非理想二元表面活性剂复配增效理论的进一步研究

在Rubingh与Rosen 提出非理想二元表面活性剂复配增效条件基础上,利用相分离模型和正规溶液理论,导出了体系降低表面张力的能力增效条件βs-βm<0,及最佳摩尔分数α1*、最低表面张力γ*cmc12和γ*cmc处对应的临界胶束浓度cmc*12.通过作三条γ～logc曲线或两条γ～logc曲线加上一个cmc值的方法,对C12NMe3Br～C12SO4Na、 C12NMe3Br～C8SO4N两种复配体系进行验证,计算结果与实验结果相符.     

20单元双压电片变形反射镜的影响函数有限元分析和实验测量

影响函数是分析双压电片变形反射镜像差校正能力的重要参量,通过建立有限元模型预测实际器件的影响函数,以有限元模型的不断优化替代实际器件的尝试性改进,可以减小构造的盲目性,从而节约研发成本,缩短双压电片变形镜的实用化进程.采用Veeco干涉仪测量了20单元双压电片变形反射镜的影响函数,同时建立有限元模型进行了相应计算,并将计算结果与实际器件的测量数据进行了对比分析.结果表明,相对于实测数据而言,有限元模型计算得出的影响函数在量值上略有偏小,但其形状和峰值位置与测量数据一致性好,两者对前35项泽尼克像差的拟合曲线也基本吻合,各项拟合误差系数之差皆小于0.1.这说明通过不断改进有限元模型实现对实际器件的优化设计是切实可行的.     

基于灰度曲线交点的结构光编码条纹边缘检测

在分析结构光编码白条纹扩散的原因和实际边缘形态的基础上,提出一种同时检测多边缘并消除扩散影响的亚像素精度方法--交点法.首先向被测表面投射互为反色的两组格雷编码图案,提取两组强度图像中灰度梯度较大的点作为边缘依据点,并对其进行曲线拟合,然后将对应拟合曲线的交点作为边缘.分析了交点法对结构光系统中常见的被测表面倾斜和离焦两个主要误差因素的适应能力.介绍了检测原理及误差因素分析,并进行了边缘检测实验.实验结果表明,对于宽度大于4 pixel的编码条纹,边缘检测相对误差小于1%,可消除被测表面倾斜和离焦的影响.     

一种基于算法融合的红外目标跟踪方法

视频目标跟踪的难点在于快速、准确地在帧与帧之间匹配目标.由于红外图像目标与背景的反差低,图像的边缘模糊并且灰度级动态范围小,使红外目标跟踪难度比可见光更大.本文提出一种针对红外日标跟踪的融合算法,该方法融合直方图和不变矩的特点.首先利用目标的直方图计算简单快速的特点,由均值平移算法快速找到局部最优解,但由于该局部最优解仪为直方图匹配的最优解,缺少目标形状特征,与实际目标位置存在一定的偏差;其次,利用边缘小变矩作为修正特征修正误差,避免跟踪误差逐渐累计而最终导致跟踪失败,以提高跟踪的稳定性和精度.实验结果表明,该算法能够消除跟踪过程中的漂移现象,提高跟踪精度.     

X射线荧光光谱(XRF)法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量

建立了X射线荧光光谱法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量的快速分析方法。以标准物质及标准物质与基准试剂氧化镁、氧化钙人工混合配制标样的方法建立标准工作曲线,重点讨论了熔剂和脱模剂的选取。最佳熔样条件：采用8.0g四硼酸锂和偏硼酸锂混合熔剂(质量比67: 33)+0.8g样品并添加溴化锂作为脱模剂,熔样温度1100℃,熔样时间10min。该方法相对标准偏差(n=12)均小于5.57%,绿泥石样品测定结果与化学法一致,硅酸盐标准物质测定结果均满足不确定度要求。