Surface modification of polyolefin separators for lithium ion batteries to reduce thermal shrinkage without thickness increase

Surface chemical modification of polyolefin separators for lithium ion batteries is attempted to reduce the thermal shrinkage, which is important for the battery energy density. In this study, we grafted organic/inorganic hybrid crosslinked networks on the separators, simply by grafting polymerization and condensation reaction. The considerable silicon-oxygen crosslinked heat-resistance networks are responsible for the reduced thermal shrinkage. The strong chemical bonds between networks and separators promise enough mechanical support even at high temperature. The shrinkage at 150 C for 30 min in the mechanical direction was 38.6% and 4.6% for the pristine and present graft-modified separators, respectively. Meanwhile, the grafting organic-inorganic hybrid crosslink networks mainly occupied part of void in the internal pores of the separators, so the thicknesses of the graft-modified separators were similar with the pristine one. The half cells prepared with the modified separators exhibited almost identical electrochemical properties to those with the commercial separators, thus proving that, in order to enhance the thermal stability of lithium ion battery, this kind of grafting-modified separators may be a better alternative to conventional silica nanoparticle layers-coated polyolefin separators.     

Conversion of quassinoids for enhancement of inhibitory effect against Epstein-Barr virus early antigen activation. Introduction of lipophilic side chain and esterification of diosphenol

Introduction of a senecioyl group into shinjulactones B and C, and esterification of the diosphenol moiety in brusatol and brucein A enhanced inhibitory effect against Epstein-Barr virus early antigen activation.     

On-line pretreatment and determination of Pb, Cu and Cd at the μg l level in drinking water by chelation ion chromatography

A novel, highly sensitive method for the simultaneous separation and determination of lead, copper, cadmium and other transition metals in drinking water was achieved by on-line sample pretreatment of chelation ion chromatography. Manganese, which coeluted with cadmium, was oxidized to permanganate by ammonium persulfate before injection. Permanganate, with bulk quantity of alkali, alkaline earth metals, iron and aluminum, was eliminated by pyrophosphoric acid–ammonium acetate buffer solution (pH 5.5), while retaining heavy and transition metals on a selective chelating resin (MetPac CC-1 column). Then, they were disabsorbed and transferred to a sulfonated cation exchanger (TMC-1 column). Finally, the concentrated trace metals were separated on a bifunctional ion-exchange column (CS5A) by a concentration gradient of oxalic acid and sodium nitrate eluents, coupled with post-column spectrophotometric detection with 2-[(5-bromo-2-pyridyl)azo]-5-diethylaminophenol (5-Br-PADAP) at 560 nm. The separation and color-development conditions were optimized. The detection limits for the method (signal-to-noise ratio=3:1) were at or below the μg l⁻¹ level. The results of drinking water analyses were satisfactory.     

Enhancement of pairing correlation by t' in the two-dimensional extended t-J model

We investigate the effects of the next-nearest-neighbor (t') and the third-nearest-neighbor (t") hopping terms on superconductivity correlation in the 2D hole-doped extended t-J model based on the variational Monte Carlo, mean-field calculation and exact diagonalization method. Despite the diversity of the methods employed, the results all point to a consistent conclusion: While the d-wave superconductivity correlation is slightly suppressed by t' and t" in underdoped regions, it is greatly enhanced in the optimal and overdoped regions. The optimal Tc is a result of the balance of these two opposite trends.     

智能建筑通信平台集约系统研究——制冷设备信号的底层通信

文中为智能建筑设计了一个通信网络系统,以实现建筑物内的低温信号采集处理和信息交换。在已有硬件设施基础上,利用基于FPGA的SOC设计技术,通过需求分析、算法设计,再到硬件开发、系统集成,实现对低温信号的处理完善,使之从系统的底层开始,为动平衡过程的所有信息交互提供服务。该系统可以满足BACNet标准和LONMARK标准,为智能建筑自控提供一套有效的信息处理模式。     

A multiplier rule on a metric space

A multiplier rule is proved for constrained minimization problems defined on a metric spaces. The proof requires a generalization of the values of a derivative in the classical case that the metric space is a normed space.     

Generation of hyperchaos from the Chen–Lee system via sinusoidal perturbation

A system with more than one positive Lyapunov exponent can be classified as a hyperchaotic system. In this study, a sinusoidal perturbation was designed for generating hyperchaos from the Chen–Lee chaotic system. The hyperchaos was identified by the existence of two positive Lyapunov exponents and bifurcation diagrams. The system is hyperchaotic in several different regions of the parameters c, ε, and ω. It was found that this method not only can enhance or suppress chaotic behavior, but also induces chaos in non-chaotic parameter ranges. In addition, two interesting dynamical behaviors, Hopf bifurcation and intermittency, were also found in this study.     

Thermo-optical study of UV cured polyether urethane diacrylate films with dispersed octadecanol

Thermally reversible light scattering (TRLS) films are prepared from ultraviolet (UV) curing of polyether urethane diacrylate (PEUDA) with dispersed low molecular weight 1-octadecanol (OD). Depending on the temperature, the OD domains are crystalline or amorphous and this produce opaque or transparent films in a reversible way. Stable optically transparent and light scattering states are obtained after 100 successive heating–cooling cycles. Moreover, morphologies of the OD domains could be varied significantly with the cure temperature and this led to notable discrepancy in optical properties. By using an UV-mask and curing in two steps at different temperatures, complex patterns could be recorded in the film that were encoded at high temperatures (60 °C) and revealed at low temperatures (i.e., at room temperature), which makes the film a candidate for thermo-optical recording medium.