Colorimetric determination of palladium (II) by means of promazine hydrochloride

In acetate buffer medium palladium(II) ions form with promazine hydrochloride (PM) two complexes: an orange one of a formula [Pd(C₁₇H₂₀N₂S)]²⁺ (λ_max = 460 nm, ε = 4.5 × 10³, at 20 °C and pH = 2) and a violet one of a formula [Pd(C₁₇H₂₀N₂S)₂]²⁺ (λ_max = 540 nm, ε = 8.8 × 10³ at 20 °C and pH = 2).The values for instability constants determined by Bjerrum's method amount to pK₁ = 3.95; pK₂ = 3.07; pβ₁ = 3.95; pβ₂ = 7.02, respectively.A colorimetric method of the determination of palladium(II) has been elaborated. The method consists in a measurement of the absorbance of the violet complex of palladium(II) with promazine hydrochloride at λ = 540 nm. The method permits the determination of 2–17 μg Pd/ml with an error of ±2%. The time of the determination is 20 min. Iron(III), Ce(IV), Pt(IV), V(V), Cr(VI), and HNO₃ interfere with the determination.     

Dissociative recombination cross section and branching ratios of protonated dimethyl disulfide and N-methylacetamide

Dimethyl disulfide (DMDS) and N-methylacetamide are two first choice model systems that represent the disulfide bridge bonding and the peptide bonding in proteins. These molecules are therefore suitable for investigation of the mechanisms involved when proteins fragment under electron capture dissociation (ECD). The dissociative recombination cross sections for both protonated DMDS and protonated N-methylacetamide were determined at electron energies ranging from 0.001 to 0.3 eV. Also, the branching ratios at 0 eV center-of-mass collision energy were determined. The present results give support for the indirect mechanism of ECD, where free hydrogen atoms produced in the initial fragmentation step induce further decomposition. We suggest that both indirect and direct dissociations play a role in ECD.     

Thermal decompositions of zinc(II) benzenedicarboxylates

The thermal decompositions of zinc(II)benzenedicarboxylates were studied in air atmosphere at a heating-rate of 10 deg min^–1. Zinc phthalate and isophthalate were dehydrated in one step and next decomposed directly to ZnO. Zinc terephthalate was dehydrated in two steps and then decomposed directly to ZnO.

---

Zusammenfassung Bei einer Aufheizgeschwindigkeit von 10°-min^–1 wurde die thermische Zersetzung von Zink(II)benzoldikarboxylat in Luft untersucht. Zinkphtalat und -isophtalat wird zunächst in einem Schritt dehydratisiert und anschließend zu ZnO zersetzt. Zinkterephtalat wird vor der endgültigen Zersetzung zu ZnO in zwei Schritten dehydratisiert.

---

10 / . - . , .

     

The application of solid sorbents for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry

Various microcolumns with solid sorbents (ion exchange resins, functionalised cellulose sorbents, chelating resins) have been tested with respect to their ability for the purification of aluminum contaminated chemicals used as modifiers in electrothermal atomic absorption spectrometry. The purification of NaNO(3), Mg(NO(3))(2), K(2)SO(4) and (NH(4))(2)HPO(4) has been the most effective with an almost 100% efficiency, when Spheron-Oxine was used as chelating resin. The sorption of aluminum from KOH solution has been found to be very high (around 90%) for all investigated sorbents. However, the best results have been obtained with anion-exchange resins. It has been difficult to purify concentrated mineral acids (HCl, H(2)SO(4)). A retention of aluminum above 80% has been achieved only when Cellex P, Chelex 100 or Amberlite XAD-2 have been used.     

Electric and sorption properties of controlled pore glasses

A series of controlled pore glasses (CPG) was made from the same raw glass by means of different chemical and thermal treatments. BET specific area, selectivity of cesium adsorption in relation to sodium, ionosorption capacity under dynamic conditions of these CPG were measured and potentiometric titrations carried out. ₀ vs. pH curves show i.e.p. and c.i.p. values similar to those for silica. KOH treatment leads to increase of BET specific surface but ionosorption capacity is decreased.     

Stochastic Navier-Stokes equations

We construct a solution to stochastic Navier-Stokes equations in dimension n4 with the feedback in both the external forces and a general infinite-dimensional noise. The solution is unique and adapted to the Brownian filtration in the 2-dimensional case with periodic boundary conditions or, when there is no feedback in the noise, for the Dirichlet boundary condition. The paper uses the methods of nonstandard analysis.The research of this author was supported by an SERC Grant.     

Dynamics of theD-dimensional FRW-cosmological models within the superstring-generated gravity model

We study the dynamics of the generalizedD-dimensional (D = 1+3+d) Friedman-Robertson-Walker (FRW) cosmological models in the framework of an extended gravity theory obtained by adding the Gauss-Bonnet term to the standard Einstein-Hilbert action. In our discussion we extensively use methods of dynamical systems. We consider models filled in with a perfect fluid obeying the equation of statep=(–1) and vacuum but non-flat models. We present a detailed analysis of the ten dimensional model and in particular we study the vacuum case. Several phase portraits show how the evolution of this model depends on the parameter.     

Inductively-coupled plasma atomic emission spectroscopic determination of trace impurities in ZrO2-powder

Four independent procedures including one using slurry nebulization ICP-AES were developed for the trace analysis of ZrO₂ powders. They were evaluated with respect to detection limits, blank values, interferences, accuracy and precision. For the procedures I–III ZrO₂ powder was decomposed by fusion with a 10-fold excess of NH₄HSO₄ and subsequent dissolution of the melt in either water or, after evaporation of NH₄HSO₄, in diluted HNO₃. In procedure I the solution was directly analyzed by ICP-AES, which was optimized with the aid of a simplex algorithm. In procedure II Zr was separated by extraction from 6 mol/l HNO₃ with a 0.5 mol/l solution of 2-thenoyltrifluoroacetone (TTA) in xylene. More than 99.5% of the Zr was removed and more than 95% of the trace elements retained. In procedure III the matrix was separated by its precipitation as ZrOCl₂·8 H₂O from a (1:4) HCl-acetone medium. More than 98% of Zr were removed and more than 90% of the trace elements were retained. In procedure IV the ZrO₂ powder was dispersed by ultrasonic treatment in water acidified with HCl (pH 2) and the slurry was directly analyzed by ICP-AES using a Babington nebulizer. The optimization and the analytical features of this procedure will be described in a subsequent paper. In all procedures the calibration was performed by standard addition and matrix matching was not necessary. The detection limits varied from 0.3 g/g (Ca) to 10 g/g (Al). The standard deviations obtained were 1–10% depending on the element and its concentration in the sample. The results of the procedures for 6 commercially available fine ZrO₂ powders were found to agree for Al, Ca, Fe, Mg, Na, Ti and Y. A good agreement between the results of the procedures using matrix separation was also observed for Cu, Mn, V, but the concentrations of these elements found by methods without matrix separation were considerably higher. Except for Ca and Mg the blank values encountered were below the detection limits.On leave from Department of Analytical Chemistry, Technical University, PL-00-664 Warsaw, Poland     

Unusual solid-state conformation of D-glucitol hexa(p-chlorobenzoate)

The carbon atom chain in the molecule ofd-glucitol hexa (p-chlorobenzoate) adopts a planar, zigzag conformation in the solid state, as determined by X-ray crystallography. The preference for such conformation in the crystal can be ascribed to the stacking interactions in which an infinite number of p-chlorobenzoyloxy substituents is involved.     

Investigation of surface phenomena on solid catalysts by thermogravimetry

Thermogravimetry was applied to the investigation of the phenomena of adsorption, chemisorption, desorption and surface reactions on solid catalysts. The measurements were carried out with 13 NaX and NaY type zeolites and with silica gels treated with sodium hydroxide, in the presence of cumene and methanol. On the basis of the quantitative results it is possible to give an interpretation of surface phenomena and to establish the existence of various active centres on the surface of the catalysts.

---

Zusammenfassung Adsorptions-, Chemisorptions- und Desorptionserscheinungen, sowie Oberflächenreaktionen an festen Katalysatoren wurden thermogravimetrisch untersucht. Die Messungen wurden an Zeoliten der Typen 13 NaX und NaY und an mit Natriumhydroxid behandelten Silikagelen in Gegenwart von Cumol und Methanol durchgeführt. Aufgrund der quantitativen Ergebnisse war es möglich, die Oberflächenerscheinungen zu deuten und das Vorhandensein von verschiedenen aktiven Zentren an der Katalysatoroberfläche nachzuweisen.

---

Résumé On a appliqué la méthode thermogravimétrique à l'étude des phénomènes d'adsorption, de chemisorption et de désorption ainsi qu'aux réactions de surface sur des catalyseurs solides. Les mesures ont été effectuées sur zéolites de type 13 NaX et NaY et sur des silicagels traités par la soude en présence de cumène et de méthanol. Des résultats quantitatifs permettent de donner une interprétation des phénomènes de surface et d'établir l'existence de divers centres actifs à la surface des catalyseurs.

---

, , , . , , , , . 13 NaX NaY , . .

---

---

The authors express their gratitude to Prof. S. Malinowski for help and discussion and to Mr. W. Dziklinski for his technical help.