Underpotential deposition of hydrogen on benzene-modified Pt(111) in aqueous H2SO4

The Pt(111) electrode is modified by an overlayer of C6H6 (ads) upon its cycling in the 0.05-0.80 V range in aq H2SO4 + 1 mM C6H6. The C6H6 (ads) overlayer significantly changes the underpotential-deposited H (H(UPD)) and anion adsorption, and cyclic-voltammetry (CV) profiles show a sharp cathodic peak and an asymmetric anodic one in the 0.05-0.80 V potential range. The C6H6 (ads) layer blocks the (bi)sulfate adsorption but facilitates the adsorption of one monolayer of H(UPD). Cycling of the benzene-modified Pt(111) in benzene-free aq 0.05 H2SO4 from 0.05 to 0.80 V results in a partial desorption of C6H6 (ads) and in a partial recovery of the CV profile characteristic of an unmodified Pt(111). The peak potential of the cathodic and anodic feature is independent of the scan rate, s (10 < or = s < or = 100 mV s(-1)), and the peak current density increases linearly with an increase of the scan rate. Temperature variation modifies the peak potential and current density but does not affect the charge density of the cathodic or anodic feature. Temperature-dependent studies allow us to determine the thermodynamic state function for the H(UPD) adsorption and desorption. Delta G degrees(ads)(H(UPD))assumes values from -4 to -12 kJ mol(-1), while has values from 9 to 14 kJ mol(-1). The values of delta Delta G degrees (delta Delta G degrees = delat Delta G degrees(ads) + delta Delta D degrees(des)) decrease almost linearly from 6 kJ mol(-1) at theta(H(UPD) --> 0 to 0 kJ mol(-1) at theta(H(UPD) --> 1. The nonzero values of delta Delta G degrees testify that the adsorbing and desorbing H(UPD) adatoms interact with an energetically different substrate. The lateral interactions changed from repulsive (omega = 29 kJ mol(-1) at theta(H(UPD) --> 0) to attractive (omega = -28 kJ mol(-1) at theta(H(UPD) --> 1) as the H(UPD) coverage increases. The values of delta S degrees(ads)(H(UPD)) increase from 19 to 56 J K(-1) mol(-1), while those of delta S degrees(des)(H(UPD)) decrease from 45 to -30 J K(-1) mol(-1) with an increase of H(UPD) coverage. The values of delta H degrees(des)(H(UPD)) and delta H degrees(des)(H(UPD)) vary from 0 to 27 kJ mol(-1). The Pt(111)-H(UPD) surface bond energy at the benzene-modified Pt(111) electrode falls in the 191-218 kJ mol(-1) range and is weaker than in the case of the unmodified Pt(111) electrode in the same electrolyte.     

Multiresolution quantum chemistry in multiwavelet bases: Hartree-Fock exchange

In a previous study we reported an efficient, accurate multiresolution solver for the Kohn-Sham self-consisitent field (KS-SCF) method for general polyatomic molecules. This study presents an efficient numerical algorithm to evalute Hartree-Fock (HF) exchange in the multiresolution SCF method to solve the HF equations. The algorithm employs fast integral convolution with the Poission kernel in the nonstandard form, screening the sparse multiwavelet representation to compute results of the integral operator only where required by the nonlocal exchange operator. Localized molecular obitals are used to attain near linear scaling. Results for atoms and molecules demonstrate reliable precision and speed. Calculations for small water clusters demonstrate a total cost to compute the HF exchange potential for all n(occ) occpuied MOs scaling as O(n(occ) (1.5)).     

Occurrence of Neighboring Group Participation Reactions in Amide-N and Amidine Complexes Derived from Pentaammine(dinitrile)cobalt(III) Ions

N-Bonded pentaamminecobalt(III) complexes of 2-cyanobenzamide, 2-cyanoacetamide, and fumaric, succinic, glutaric, and adipic amide-nitriles have been prepared. The kinetics of the base hydrolysis of (succinonitrile)pentaamminecobalt(III) have been measured: k(obsd) = k(OH) [OH(-)]; k(OH) = 1.23 x 10(3) {I = 1.00 M (NaCH(3)COO), 25 degrees C}. Amido-N-coordinated 2-cyanobenzamide cyclized in aqueous base, and it forms [(1-oxo-3-iminoisoindolino-endo-N)pentaamminecobalt(III). In aqueous acid it protonates on the exo-imine and solvolyzes (k(H) = 7.9 x 10(-)(5) s(-)(1)), forming the pentaammineaquacobalt(III) complex and 1-oxo-3-iminoisoindoline. In aqueous acid the amido-N complexes are protonated on the amide oxygen. The 2-cyanobenzamide species rearranges to form the nitrile-bonded linkage isomer in aqueous acid and also in Me(2)SO-d(6), while the succinic amide nitrile complex rearranges more slowly in aqueous acid to form solely the nitrile-bonded linkage isomer. The kinetics of the reaction were k(obsd) = f(k(H)[H(+)]/(K(a) + [H(+)])) where k(H) = 3.4 x 10(-)(4) M(-)(1) s(-)(1) and K(a) = 6.76 x 10(-)(2) M, pK(a) 1.2; pK(a) 1.3 (spectrophotometric) {I = 1.00 M (LiClO(4).3H(2)O), 25 degrees C}. In Me(2)SO-d(6) this amide-N complex reacts by three pathways: solvolysis, amide-N to -O isomerization, and amide-N to nitrile-bonded rearrangement (10%). The conjugate acid of the 2-cyanoacetamido-N complex reacted in both aqueous acid and acidified Me(2)SO-d(6) by solvolysis, amide N to O isomerization, and amide-N to nitrile-bonded rearrangement (17% in each solvent). The fumaric, glutaric, and adipic amide-nitrile complexes bonded through the amide nitrogen react only by solvolysis and amide-N to -O isomerization. Pentaamminecobalt(III) complexes of 2-cyanobenzamidine and succinic, glutaric, and adipic amidine-nitriles bonded through the amidine secondary nitrogen have been prepared. The 2-cyanobenzamidine complex undergoes rapid ligand cyclization to form the corresponding complex of 1,3-diiminoisoindoline bonded through the deprotonated endocyclic nitrogen. In aqueous acid the complex is protonated on one of the exo-imines, and this solvolyzes to form the pentaammineaquacobalt(III) complex and 1,3-diiminoisoindoline {k(H) = 1.7 x 10(-)(3) s(-)(1) (0.5 M HCl, 25 degrees C). Coordinated succinic amidine-nitrile also cyclizes in liquid ammonia to yield the complex of 2,5-diiminopyrrolidine bonded through the deprotonated endocyclic nitrogen. This is stable in aqueous base but solvolyzes rapidly (t(1/2) (s)) in aqueous acid to the aqua complex and succinimide; the latter is formed by hydrolysis of the free 2,5-diiminopyrrolidine. The dinuclear complex &mgr;-decaammine(succinonitrile)dicobalt(III) was synthesized; in aqueous base it forms &mgr;-(succinamido-N)decaamminecobalt(III). The dinuclear dinitrile complex reacts in liquid ammonia to form the corresponding succinic amidine-nitrile species which cyclizes rapidly to form &mgr;-decaammine(2,5-diiminopyrrolidino)cobalt(III) in which the ligand is bonded to cobalt(III) through the exo-imines.     

Unique spatial heterogeneity in ionic liquids

A multiscale coarse-graining model for ionic liquids has been extended to investigate the unique aggregation of cations in ionic liquids through computer simulation. It has been found that, with sufficiently long side chains, the tail groups of cations aggregate to form spatially heterogeneous domains, while headgroups of the cations and the anions distribute as uniformly as possible. This is understood as the result of competition between the charged electrostatic interactions between headgroups and anions and the collective short-range interactions between the neutral tail groups. This aggregation can help to explain a number of experimentally observed physical phenomena in ionic liquids.     

Synthesis of the C6-C21 segment of amphidinolide E

[reaction: see text] A convergent approach to a C6-C21 segment of the polyketide amphidinolide E has been developed through combination of three subunits by allenylindium bromide-aldehyde addition and Suzuki sp2-sp3 coupling.     

Blends of starch with ethylene vinyl alcohol copolymers: effect of water,glycerol, and amino acids as plasticizers

Blends of thermoplastic starch with poly(ethylene‐co‐vinyl alcohol) copolymer (EVOH) were melt extruded with water/glycerol as plasticizer and a series of amino acid additives. The biggest factor in end‐use mechanical properties proved to be the relative humidity (RH) during storage. Plasticized starch‐EVOH blends stored at 0 and 50% RH changed significantly over time, with, for example, the tensile strength (TS) of the glycerol‐plasticized blend increasing from 4.7 to 26.3 MPa over 8 weeks when maintained at 0% RH. In contrast, the TS of this same sample stored at 75% RH remained unchanged for 8 weeks. Amino acids provided relatively minor, but significant changes in mechanical properties with time. Based on TS, elongation‐to‐break, and modulus, it may be concluded that β‐alanine, sarcosine, and L ‐proline were more effective than glycerol at maintaining strong flexible blends. Increases in crystallinity and changes in morphology with time, as described by modulated DSC were correlated to these changes in mechanical properties. Published in 2007 by John Wiley & Sons, Ltd.     

Ring currents as probes of the aromaticity of inorganic monocycles : P5-, As5-, S2N2, S3N3-, S4N3+, S4N42+, S5N5+, S42+ and Se42+

Current-density maps were calculated by the ipsocentric CTOCD-DZ/6-311G** (CTOCD-DZ=continuous transformation of origin of current density-diamagnetic zero) approach for three sets of inorganic monocycles: S(4) (2+), Se(4) (2+), S(2)N(2), P(5) (-) and As(5) (-) with 6 pi electrons; S(3)N(3) (-), S(4)N(3) (+) and S(4)N(4) (2+) with 10 pi electrons; and S(5)N(5) (+) with 14 pi electrons. Ipsocentric orbital analysis was used to partition the currents into contributions from small groups of active electrons and to interpret the contributions in terms of symmetry- and energy-based selection rules. All nine systems were found to support diatropic pi currents, reinforced by sigma circulations in P(5) (-), As(5) (-), S(3)N(3) (-), S(4)N(3) (+), S(4)N(4) (2+) and S(5)N(5) (+), but opposed by them in S(4) (2+), Se(4) (2+) and S(2)N(2). The opposition of pi and sigma effects in the four-membered rings is compatible with height profiles of calculated NICS (nucleus-independent chemical shifts).     

Stereochemical assignments of the 7-phenyl-3-oxabicyclo[4.1.0]heptanes

A method for making stereochemical assignments based on nmr data for the 7-phenyl-3-oxabicyclo[4.1.0]-heptanes is described.     

Pt(II) or Ag(I) salt catalyzed cycloisomerizations and tandem cycloadditions forming functionalized azacyclic arrays

[reaction: see text] Cyclic ene-N-p-toluenesulfonamides tethered to an electron-deficient alkyne undergo cycloisomerizations readily under the influence of catalytic Pt(II) salts (PtCl2 or [dppbPtmu-OH]2(BF4)2) or AgOTf. Yields for this process range from 47% to 99%. The resulting functionalized 2-azahydrindans can be reacted further using the Diels-Alder reaction. Tandem cycloisomerization-cycloaddition reactions in one pot generate highly functionalized 1-azadecalin ring systems in a highly stereocontrolled manner.