Novel europium and osmium complexes for pure red light emitting diode applications

Pure and efficient red light-emitting diodes based on novel europium (Eu) and osmium (Os) complexes were demonstrated. The Eu complex, with dendron substituted diketone ligands, exhibits high photoluminescence efficiency of 45%. When a copolymer containing carbazole and 1,3,4-oxadiazole groups was used as the host, narrow electroluminescence at 617 nm was achieved, with a full width at half maximum of 4 nm and a maximum external quantum efficiency (η) of 0.80%. The Os complex shows pure red emission peaking at 650 nm. The Commission Internationale de l'Eclairage (CIE) chromaticity coordinates (x, y) are (0.65, 0.33). Maximum η and brightness achieved were 0.82% and 590 cd/m², respectively.     

Nanoindentation of polymers: an overview

In this paper, the application of instrumented indentation devices to the measurement of the elastic modulus of polymeric materials is reviewed. This review includes a summary of traditional analyses of load‐penetration data and a discussion of associated uncertainties. Also, the use of scanning probe microscopes to measure the nanoscale mechanical response of polymers is discussed, particularly with regard to the associated limitations. The application of these methods to polymers often leads to measurements of elastic modulus that are somewhat high relative to bulk measurements with potentially artificial trends in modulus as a function of penetration depth. Also, power law fits to indentation unloading curves are often a poor representation of the actual data, and the power law exponents tend to fall outside the theoretical range. These problems are likely caused by viscoelasticity, the effects of which have only been studied recently. Advancement of nanoindentation testing toward quantitative characterization of polymer properties will require material‐independent calibration procedures, polymer reference materials, advances in instrumentation, and new testing and analysis procedures that account for viscoelastic and viscoplastic polymer behavior.     

Method of calculating band shape for molecular electronic spectra

A method for approximating the band shape of molecular electronic transitions based on a single geometric configuration is described. The band shape is modeled using an empirical parameter to estimate the width at half-height for each transition. In addition to generating a shape for allowed transitions, a procedure is developed for approximating the oscillator strength for the symmetry forbidden bands. The results obtained using these two approximations are then compared with experimental spectra and to the results obtained from stochastic methods for simple organic molecules, such as benzene, naphthalene, and the diazobenzenes. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 781–796, 1998     

The fate of the tert-butylsulfinyl auxiliary after acid-promoted cleavage—a method for recycling t-BuSONH2

Ellman’s chiral auxiliary is converted into tert-butylsulfinyl chloride on sulfinamide deprotection with HCl and can be recovered in high yield upon treatment with ammonia. The enantiopure auxiliary can be obtained by trapping the sulfinyl chloride with a chiral alcohol followed by treatment of the resulting sulfinate ester with LiNH₂.     

Nucleophilic displacements of non-racemic α-trifluoromethyl benzylic triflates

Effective protocols for the introduction of chiral α-trifluoromethyl benzyl moieties by nucleophilic displacement of enantiomerically enriched α-trifluoromethyl benzylic triflates are presented. The effects of substrate electronics, solvent polarity, temperature, and base are studied by measuring the diastereomeric or enantiomeric excesses of the displacement products formed by coupling a variety of α-trifluoromethyl benzylic triflates with a range of nucleophiles including amines, carboxylates, thiols, and malonates. Preliminary investigations to elucidate the mechanism(s) involved in the loss of stereochemical integrity at the benzylic center in the nucleophilic displacement reactions are also reported.     

Oxadiazole-metal interface: from isolated molecules to pi-stacking

Derivatives of 2,5-diaryl-1,3,4-oxadiazole are used widely for electron transport in organic light emitting diodes (OLED). This study addresses the structure of 2,5-diphenyl-1,3,4-oxadiazole (PPD) molecules on Cu(111) using scanning tunneling microscopy (STM) and density function theory (DFT): at incomplete coverage, PPD molecules are found horizontally on the surface; once the surface area is insufficient to accommodate all adsorbates in this fashion, a pi-stacked film of vertically arranged molecules is formed. In contrast to bulk PPD, in this film, the molecules are arranged face-to-face at a separation of square root(3a0) = 4.4 A as imposed by the substrate interatomic spacing along the [-2 1 1] direction.     

Ultraviolet absorbance detection of colchicine and related alkaloids on a capillary electrophoresis microchip

The separation and UV absorbance detection of four toxic alkaloids, colchicine, thiocolchicine, colchicoside, and thiocolchicoside, on a microchip-based capillary electrophoresis device are reported. To increase the sensitivity of UV absorbance detection, optical cells with extended path lengths were integrated into the separation channel during the microfabrication process. The absorbance values realized on the microchip using these optical cells were proportional to the increase in average depths according to the Beer-Lambert Law, resulting in sensitivity enhancements by as much as five times. Linearity of response was observed from 5.0 to 500 mg L⁻¹ of colchicine, with detection limits ranging from 2 to 6 mg L⁻¹ depending upon the specific alkaloid and the dimension of the optical cell. The extraction of colchicine from spiked milk samples was performed and an average recovery rate of 83% with a relative standard deviation of 3.8% was determined using the optimized conditions on the microchip.     

Micellar electrokinetic chromatography and capillary electrochromatography of nitroaromatic explosives in seawater

The ability to separate nitroaromatic and nitramine explosives in seawater sample matrices is demonstrated using both MEKC and CEC. While several capillary-based separations exist for explosives, none address direct sampling from seawater, a sample matrix of particular interest in the detection of undersea mines. Direct comparisons are made between MEKC and CEC in terms of sensitivity and separation efficiency for the analysis of 14 explosives and explosive degradation products in seawater and diluted seawater. The use of high-salt stacking with MEKC results, on average, in a three-fold increase in the number of theoretical plates, and nearly double resolution for samples prepared in 25% seawater. By taking advantage of long injection times in conjunction with stacking, detection limits down to sub mg/L levels are attainable; however, resolution is sacrificed. CEC of explosive mixtures using sol-gels prepared from methyltrimethoxysilane does not perform as well as MEKC in terms of resolving power, but does permit extended injection times for concentrating analyte onto the head of the separation column with little or no subsequent loss in resolution. Electrokinetic injections of 8 min at high voltage allow for detection limits of explosives below 100 microg/L.     

Mass selective separation applied to radioisotopes of cesium

A technique that uses the intrinsic mass‐based separation capability of a quadrupole mass spectrometer has been used to resolve spectral radiometric interference of two isotopes of the same element. In this work the starting sample was a mixture of ¹³⁷Cs and ¹³⁴Cs and was (activity) dominated by ¹³⁷Cs. This methodology separated and ‘implanted’ ¹³⁴Cs that was later quantified for spectral features and activity with traditional radiometric techniques. This work demonstrated a ¹³⁴Cs/¹³⁷Cs activity ratio enhancement of >4 orders of magnitude and complete removal of ¹³⁷Cs spectral features from the implanted target mass (i.e. 134). Copyright © 2016 John Wiley & Sons, Ltd.