Development of a pulsed-laser,fiber-optic-based fluorimeter: determination of fluorescence decay times of polycyclic aromatic hydrocarbons in sea water

A fiber-optic-based system for remote measurement of time-resolved fluorescence emission spectra is described and characterized. A pulsed nitrogen laser is used to induce fluorescence and a time-gated, one-dimensional photodiode array is used to measure the decay of the fluorescence emission spectra. The results compare favorably with reported values for well characterized compounds having fluorescence decay times in the range 4–50 ns. The potential of using time-resolved fluorimetry (TRF) over fiber-optic cables as a means of improving the specificity of remote fluorescence determinations of spectrally similar polycyclic aromatic hydrocarbons in sea water is demonstrated.     

The design of boronic acid spectroscopic reporter compounds by taking advantage of the pK(a)-lowering effect of diol binding: nitrophenol-based color reporters for diols

The complex that forms between a boronic acid and a diol is often much more acidic than the starting boronic acid. In conditions where the solution pH is between the two pK(a) values, the boron atom will convert from a neutral trigonal form to an anionic tetrahedral form upon complexation. Such a change is likely to dramatically alter the electron density of neighboring groups. Utilizing this effect, we have designed and synthesized two nitrophenol-based boronic acid reporter compounds that change ionization states and therefore spectroscopic properties upon diol binding. Both compounds show significant UV changes upon addition of saccharides. For example, a blue shift of the absorption max from 373 to 332 nm was observed with the addition of D-fructose to 2-hydroxy-5-nitrophenylboronic acid at neutral pH. Such a reporter compound can be used as a recognition and signaling unit for the construction of polyboronic acid sensors for the selective and specific recognitions of saccharides of biological significance.     

Enantioenriched dihydropyrones from beta-lactone templates

[reaction: see text] Optically active 4-substituted 2-oxetanones provide conduits for preparing 2,3-dihydro-4H-pyrone heterocycles. Enantioenriched beta-lactones are prepared by asymmetric catalytic acyl halide-aldehyde cyclocondensation reactions. Hydrazone anion-mediated beta-lactone ring opening and ensuing cyclization-dehydroamination of the derived beta-ketohydrazone afford the desired dihydropyrones (68-81%). Optimized lactone ring-opening-cyclization reaction conditions render a variety of optically active 4-substituted-2-oxetanones as effective precursors to enantioenriched 2,3-dihydro-4H-pyrones.     

Statistical properties of aggregation with injection

We study a generalized aggregation process in which charged particles diffuse and coalesce randomly on a lattice. For one-dimensional and mean-field models, we show that there exists a statistically-invariant steady state when randomly charged particles are continuously injected. The steady-state charge distribution obeys a power law with the exponent depending both on the type of the injection and on the spatial dimension. The response of the system to a perturbation (i.e., relaxation) is characterized by either a power law decay (t ^– ,1) or a compressed exponential decay [exp(–t ),>1].     

Effect of electrospray ionization conditions on low-energy tandem mass spectra of peptides

The effect of electrospray ionization (ESI) conditions on low-energy tandem mass spectra of peptides in the relative molecular mass range 400–1200 was examined. For singly charged peptide ions the source skimmer potential (which determines the degree of acceleration of the ions through the intermediate pressure region in the source) can strongly influence the extent of fragmentation observed in tandem mass spectra, especially at low collision energies. For each peptide there is an optimum skimmer potential which represents a balance between generating ions with sufficient internal energy for subsequent tandem mass spectrometric experiments and inducing the onset of other processes such as source fragmentation. The fragmentation which can be achieved in tandem mass spectra with high skimmer potentials differs from ESI source fragmentation for the same peptides. We have found that fragmentation in ESI mass spectra depends both on skimmer potential and on solvent pH, presumably because the latter determines the proportion of doubly charged species generated from a given peptide. Low-energy tandem mass spectra of peptides following ESI are equally as sensitive to peptide structure and the type of adduct studied (e.g. [M + H]⁺ vs. [M + NH₄]⁺) as tandem mass spectra obtained following older ionization methods such as fast atom bombardment.     

Identification of inorganic ions in post‐blast explosive residues using portable CE instrumentation and capacitively coupled contactless conductivity detection

Novel CE methods have been developed on portable instrumentation adapted to accommodate a capacitively coupled contactless conductivity detector for the separation and sensitive detection of inorganic anions and cations in post‐blast explosive residues from homemade inorganic explosive devices. The methods presented combine sensitivity and speed of analysis for the wide range of inorganic ions used in this study. Separate methods were employed for the separation of anions and cations. The anion separation method utilised a low conductivity 70 mM Tris/70 mM CHES aqueous electrolyte (pH 8.6) with a 90 cm capillary coated with hexadimethrine bromide to reverse the EOF. Fifteen anions could be baseline separated in 7 min with detection limits in the range 27–240 μg/L. A selection of ten anions deemed most important in this application could be separated in 45 s on a shorter capillary (30.6 cm) using the same electrolyte. The cation separation method was performed on a 73 cm length of fused‐silica capillary using an electrolyte system composed of 10 mM histidine and 50 mM acetic acid, at pH 4.2. The addition of the complexants, 1 mM hydroxyisobutyric acid and 0.7 mM 18‐crown‐6 ether, enhanced selectivity and allowed the separation of eleven inorganic cations in under 7 min with detection limits in the range 31–240 μg/L. The developed methods were successfully field tested on post‐blast residues obtained from the controlled detonation of homemade explosive devices. Results were verified using ion chromatographic analyses of the same samples.     

Parallel single-cell optical transit dielectrophoresis cytometer

In this work, we present an optical transit DEP flow cytometer for parallel single-cell analysis. Each cell's dielectric property is inferred from velocity perturbations due to DEP actuation in a microfluidic channel. Dual LED sources facilitate velocity measurement by producing two transit shadows for each cell passing through the channel. These shadows are detected using a 256-pixel linear optical array detector. Massively parallel analysis is possible as each pixel of the detector can independently analyze the passing cells. A wide channel (∼18 mm) was employed to carry many particles simultaneously, and the system was capable of detecting the velocity of over 200 cells simultaneously. We have achieved analysis rates for 10 µm diameter polystyrene spheres response exceeding 250 per second. With appropriate calibration, this DEP cytometer can quantitatively measure the dielectric response. The dielectric response (Clausius–Mossotti factor) of viable CHO cells was measured over the frequency range of 100 kHz to 6 MHz, and the obtained response matches the previously measured values by our group. The DEP cytometer uses simple modular components to achieve high throughput label-free single-cell dielectric analysis and can begin analyzing particles within 10 s after starting to pump the sample into the channel.     

2D SMARTCyp reactivity-based site of metabolism prediction for major drug-metabolizing cytochrome P450 enzymes

Cytochrome P450 (CYP) 3A4, 2D6, 2C9, 2C19, and 1A2 are the most important drug-metabolizing enzymes in the human liver. Knowledge of which parts of a drug molecule are subject to metabolic reactions catalyzed by these enzymes is crucial for rational drug design to mitigate ADME/toxicity issues. SMARTCyp, a recently developed 2D ligand structure-based method, is able to predict site-specific metabolic reactivity of CYP3A4 and CYP2D6 substrates with an accuracy that rivals the best and more computationally demanding 3D structure-based methods. In this article, the SMARTCyp approach was extended to predict the metabolic hotspots for CYP2C9, CYP2C19, and CYP1A2 substrates. This was accomplished by taking into account the impact of a key substrate-receptor recognition feature of each enzyme as a correction term to the SMARTCyp reactivity. The corrected reactivity was then used to rank order the likely sites of CYP-mediated metabolic reactions. For 60 CYP1A2 substrates, the observed major sites of CYP1A2 catalyzed metabolic reactions were among the top-ranked 1, 2, and 3 positions in 67%, 80%, and 83% of the cases, respectively. The results were similar to those obtained by MetaSite and the reactivity + docking approach. For 70 CYP2C9 substrates, the observed sites of CYP2C9 metabolism were among the top-ranked 1, 2, and 3 positions in 66%, 86%, and 87% of the cases, respectively. These results were better than the corresponding results of StarDrop version 5.0, which were 61%, 73%, and 77%, respectively. For 36 compounds metabolized by CYP2C19, the observed sites of metabolism were found to be among the top-ranked 1, 2, and 3 sites in 78%, 89%, and 94% of the cases, respectively. The computational procedure was implemented as an extension to the program SMARTCyp 2.0. With the extension, the program can now predict the site of metabolism for all five major drug-metabolizing enzymes with an accuracy similar to or better than that achieved by the best 3D structure-based methods. Both the Java source code and the binary executable of the program are freely available to interested users.