Catalytic synthesis of nitrogen-containing heterocycles (a review)

The process of the catalytic synthesis of a number of nitrogenous heterocyclic compounds based on the utilization of reactions involving the amination of oxygen-containing heterocycles, the dehydration cyclization of amino alcohols, the deamination of di- and polyamines, and the intermolecular dehydration cyclization of glycols with diamines have been considered.     

Hydrothermal synthesis of fluorated single crystals: BaMnF4 and BaF2·HF

Investigations to eliminate defects in the incommensurate phase BaMnF₄, led to a method of preparation at a temperature lower than the melting point of BaMnF₄. Qualitative studies of the systems BaF₂ -H₂O -HF and MnF₂ -H₂O -HF showed that very pure single crystals of BaMnF₄ could be grown at a temperature lower than 300°C. Several new phases could be isolated as single crystals, in particular: BaF_2^′HFSingle crystal X-ray analysis revealed the compound to be monoclinic (Space Group P2₁ and Z = 2) and confirmed the formula found by chemical analysis. However, because of the difficulty to distinguish between fluorine and oxygen atoms, some problems remain, which will be solved by neutron diffraction studies. Infrared analysis indicate the presence of HF^?₂ and suggest the following representation: (Ba²⁺)₂(HF^?₂)₂(F^?)₂.It is possible to extend this method of synthesis to the preparation of other fluorides and related compounds, in particular to those of europium and strontium.     

Photophysics of monodisperse platinum-acetylide oligomers: delocalization in the singlet and triplet excited states

A series of monodisperse Pt-acetylide polymers that contain the [-CC-(p-C6H4)-CC-(t-Pt(PBu3)2)-]n repeat unit has been prepared for n = 1, 2, 3, 4, 5, and 7. The photophysical properties of the series provide information concerning the relationship between the oligomer length and delocalization in the singlet and triplet excited states of the pi-conjugated electron system. The results imply that the singlet excited state is delocalized over approximately 6 repeat units; however, the triplet state is considerably more localized. The triplet energy is almost invariant with oligomer length, but the phosphorescence spectra and triplet nonradiative decay rates indicate that the electron-vibrational coupling in the triplet state decreases with increasing oligomer length.     

First and second derivative matrix elements for the stretching,bending, and torsional energy

Matrix elements for the first and second derivatives of the internal coordinates with respect to Cartesian coordinates are reported for stretching, linear, nonlinear, and out-of-plane bending and torsional motion. Derivatives of the energy with respect to the Cartesian coordinates are calculated with the chain rule. Derivatives of the energy with respect to the internal coordinates are straightforward, but the calculation of the derivatives of the internal coordinates with respect to the Cartesian coordinates can be simplified by the following two steps outlined in this article. First, the number of terms in the analytical functions can be reduced or will vanish when the derivatives of the bond length, bond angle, and torsion angle are reported in a local coordinate system in which one bond lies on an axis and an adjacent bond lies in the plane of two axes or is projected onto perpendicular planes for linear and out-of-plane bending motion. Second, a simple rotation transforms these derivatives to the appropriate orientation in the space-fixed molecular coordinate system. Functions of the internal coordinates are invariant with respect to translation and rotation. The translational invariance and the symmetry of the second derivatives for a system with L atoms are used to select L-1- and L(L-1)/2-independent first and second derivatives, respectively, of which approximately half of the latter vanish in the local coordinate system. The rotational invariance permits the transformation of the simplified derivatives in the local coordinate system to any orientation in space. The approach outlined in this article simplifies the formulas by expressing them in a local coordinate system, identifies the most convenient independent elements to compute, from which the dependent ones are calculated, and defines a transformation to the space-fixed molecular coordinate system.     

High-resolution single-stranded DNA analysis on 4.5 cm plastic electrophoretic microchannels

Plastic microchannels (4.5 cm long) fabricated from an etched glass master were tested for high-resolution single-stranded DNA analysis. Using replaceable denaturing linear polyacrylamide as sieving matrix, one-color separation of a fragment sizing standard with single-base resolution (R > 0.5) was achieved up to 275 bases. Two-color sizing analysis of four loci short tandem repeat (STR) allelic ladder (CSF1PO, TPOX, TH01, vWA) with single-base resolution (R = 0.62) on TH01 alleles 9.3 (198 bp) and 10 (199 bp) was demonstrated. An average standard deviation of +/- 0.06 bp and +/-0.11 bp in sizing 32 alleles of the CTTv ladder was attained between runs and between channels, respectively. Four-color sequencing separation of a terminator sequencing standard showed a base-calling accuracy of 99.1% out to 320 bases in 13 min.     

Post-column reaction detection of biotin in human plasma ultrafiltrate based on laser-induced fluorescence energy transfer in the far-red spectral region

High performance liquid chromatography followed by post-column reaction detection in the far-red spectral region provides added sensitivity and selectivity. A homogeneous fluorescence energy transfer assay in the competitive mode based on the binding of biotin and streptavidin was developed as an on-line post-column reaction detection system. The labels used for energy transfer were R-Phycoerythrin conjugated to biotin and Cyanine 5 labeled with streptavidin. The energy transfer peak was measured at 670 nm and excitation was achieved using the 488 nm line of an argon ion laser. The biotin concentration in plasma ultrafiltrate ranged from 0.024 to 6.12 ng/mL (n = 6). The precision of the two controls, 0.24 and 2. 44 ng/mL, was found to be 18.70% and 9.92% relative standard deviation respectively. Accuracy was 10.47% and 1.95% difference from spiked, respectively (n = 6). The limit of detection was 21.70 pg/mL (8.90 x 10(-11)M) calculated based on a factor of 2x the standard deviation of the blank (n = 6). The correlation coefficient for the calibration curve was found to be 0.9995. Recovery from plasma ultrafiltrate at 2.44 ng/mL was 103.40% (n = 6). Detection selectivity was indicated by the absence of background fluorescence in six different plasma samples collected from six individual donors. Endogenous levels were detected in two of the six pools of plasma ultrafiltrates.     

Determination of pyrethrin and pyrethroid pesticides in urine and water matrixes by liquid chromatography with diode array detection

The following pyrethrin and pyrethroid pesticides were determined in urine and water matrixes by liquid chromatography with diode array detection (LC-DAD): pyrethrin I, pyrethrin II, tetramethrin, baythroid, bifenthrin, fenvalerate, phenothrin, allethrin, resmethrin, cis-permethrin, and trans-permethrin. In addition, 3-phenoxybenzyl alcohol, a metabolite of various pyrethroids, was also successfully determined by the analytical method. The matrix extraction was simple, inexpensive, and fast, using only sodium chloride and acetonitrile. The acetonitrile extract was filtered and analyzed by LC-DAD. The method detection limits for the pyrethrin pesticides in 5 mL urine were determined to range from 0.002 to 0.04 microg/mL, depending on the individual pyrethrin. Recoveries from spiked tap water ranged from 77 to 96%; recoveries from urine ranged from 80 to 117%. This method is especially well-suited to clinical investigations, in which rapid analysis of forensic samples is often required.     

Plasma Thermal Conversion of Methane to Acetylene

This paper describes a re-examination of a known process for the direct plasma thermal conversion of methane to acetylene. Conversion efficiencies (% methane converted) approached 100% and acetylene yields in the 90–95% range with 2–4% solid carbon production were demonstrated. Specificity for acetylene was higher than in prior work. Improvements in conversion efficiency, yield, and specificity were due primarily to improved injector design and reactant mixing, and minimization of temperature gradients and cold boundary layers. At the 60-kilowatt scale cooling by wall heat transfer appears to be sufficient to quench the product stream and prevent further reaction of acetylene resulting in the formation of heavier hydrocarbon products or solid carbon. Significantly increasing the quenching rate by aerodynamic expansion of the products through a converging–diverging nozzle led to a reduction in the yield of ethylene but had little effect on the yield of other hydrocarbon products. While greater product selectivity for acetylene has been demonstrated, the specific energy consumption per unit mass of acetylene produced was not improved upon. A kinetic model that includes the reaction mechanisms resulting in the formation of acetylene and heavier hydrocarbons, through benzene, is described.     

Electrochemical synthesis and characterization of conducting polymers in supercritical carbon dioxide

This contribution reports the first synthesis of conducting polymers (CPs), specifically, polyaniline (PAn) and polypyrrole (PPy), in supercritical carbon dioxide (scCO2). CPs synthesized electrochemically in scCO2 were characterized with cyclic voltammetry (CV), four-point probe conductivity, scanning electron microscopy (SEM), and UV-vis spectroscopy. Preliminary data indicate that CPs synthesized by this method exhibit novel morphology and high conductivity comparable to that synthesized by traditional methods.     

A biomimetic strategy for the synthesis of the tricyclic dibenzofuran-1,4-dione core of popolohuanone E

A concise synthesis of the complete tricyclic dibenzofuran-1,4-dione aromatic core of popolohuanone E has been demonstrated by mild base treatment of a biquinone intermediate, thus establishing a biomimetic route to this family of heterocyclic ring systems and the total synthesis of popolohuanone E.