Bentonite slurries—zeta potential,yield stress,adsorbed additive and time-dependent behaviour

Bentonite clay is a vital ingredient of drilling mud. The time-dependent and high shear thinning yield stress behaviour of drilling mud is essential for maintaining wellbore stability and to remove cuttings, cool and clean the drill bit of debris. As-prepared 3, 5 and 7 wt.% bentonite clay slurries displayed time-dependent behaviour where the yield stress (measured after quick stirring) decreased with time of rest. An equilibrium value is reached after 24 h. Despite the low solids concentration, the yield stress is already relatively high and is displayed at all pH level. The yield stress is maximum at pH 2 and minimum at pH ∼ 7. This yield stress is due to the formation of gel structure by the swelling clay particles. However the addition of phosphate additives such as (PO₃)^19 −, (P₃O₁₀)^5 − and (P₂O₇)^4 − completely dispersed the clay slurries at pH above 6. At pH below 6, yield stress is still present but is 3-folds smaller than that of the pure bentonite slurry. With phosphate additives, the magnitude of the critical zeta potential at the complete dispersion pH is ca 48 mV. However for the pure bentonite, the slurry remained flocculated at zeta potential of >50 mV in magnitude. Interestingly, (P₂O₇)^4 − anions is more effective than the other two phosphate additives in reducing the yield stress at low pH, ∼ 2.0.     

Supramolecular side chain liquid crystalline polymers assembled via hydrogen bonding between carboxylic acid-containing polysiloxane and azobenzene derivatives

Supramolecular side chain liquid crystalline polymers were prepared from poly(3-carboxypropylmethylsiloxane) (PSI100) and azobenzene derivatives through intermolecular hydrogen bonding (H-bonding) between the carboxylic acid groups in the PSI100 and the imidazole rings in the azobenzene derivatives. The existence of H-bonding has been confirmed using FTIR spectroscopy. The polymeric complexes behave as liquid crystalline (LC) polymers and exhibit stable mesophases. The LC behaviour of these H-bonded polymeric complexes was investigated by differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction. The complexes exhibit nematic LC phases identified on the basis of Schlieren optical textures. On increasing spacer length or the concentration of the H-bonded mesogenic unit in the complex, the clearing temperature and the temperature range of the LC phase of the polymeric complex increase. The terminal group plays a critical role in determining the LC properties of the polymeric complexes. A terminal methoxy group is more efficient than a nitro group in increasing the clearing temperature. The electron donor-acceptor interactions between the H-bonded mesogenic units containing methoxy and nitro terminal groups in supramolecular 'copolymeric' complexes lead to an increase in the clearing temperature and a wider temperature range for the LC phase.     

Quantification of L‐ergothioneine in human plasma and erythrocytes by liquid chromatography‐tandem mass spectrometry

A sensitive analytical method has been developed and validated for the quantification of L‐ergothioneine in human plasma and erythrocytes by liquid chromatography‐tandem mass spectrometry. A commercially available isotope‐labeled L‐ergothioneine‐d₉ is used as the internal standard. A simple protein precipitation with acetonitrile is utilized for bio‐sample preparation prior to analysis. Chromatographic separation of L‐ergothioneine is conducted using gradient elution on Alltime C18 (150 mm × 2.1 mm, 5 µ). The run time is 6 min at a constant flow rate of 0.45 ml/min. The mass spectrometer is operated under a positive electrospray ionization condition with multiple reaction monitoring mode. The mass transitions of L‐ergothioneine and L‐ergothioneine‐d₉ are m/z 230 > 127 and m/z 239 > 127, respectively. Excellent linearity [coefficient of determination (r²) ≥ 0.9998] can be achieved for L‐ergothioneine quantification at the ranges of 10 to 10 000 ng/ml, with the intra‐day and inter‐day precisions at 0.9–3.9% and 1.3–5.7%, respectively, and the accuracies for all quality control samples between 94.5 and 101.0%. This validated analytical method is suitable for pharmacokinetic monitoring of L‐ergothioneine in human and erythrocytes. Based on the determination of bio‐samples from five healthy subjects, the mean concentrations of L‐ergothioneine in plasma and erythrocytes are 107.4 ± 20.5 ng/ml and 1285.0 ± 1363.0 ng/ml, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Chemically-modified graphenes for oxidation of DNA bases: analytical parameters

We studied the electroanalytical performances of chemically-modified graphenes (CMGs) containing different defect densities and amounts of oxygen-containing groups, namely graphite oxide (GPO), graphene oxide (GO), thermally reduced graphene oxide (TR-GO) and electrochemically reduced graphene oxide (ER-GO) by comparing the sensitivity, selectivity, linearity and repeatability towards the oxidation of DNA bases. We have observed that for differential pulse voltammetric (DPV) detection of adenine and cytosine, all CMGs showed enhanced sensitivity to oxidation, while for guanine and thymine, ER-GO and TR-GO exhibited much improved sensitivity over bare glassy carbon (GC) as well as over GPO and GO. There is also significant selectivity enhancement when using GPO for adenine and TR-GO for thymine. Our results have uncovered that the differences in surface functionalities, structure and defects of various CMGs largely influence their electrochemical behaviour in detecting the oxidation of DNA bases. The findings in this report will provide a useful guide for the future development of label-free electrochemical devices for DNA analysis.     

Influence of the Extraction Method on the Quality and Chemical Composition of Walnut (Juglans regia L.) Oil

The present study investigated and compared the quality and chemical composition of Moroccan walnut (Juglans regia L.) oil. This study used three extraction techniques: cold pressing (CP), soxhlet extraction (SE), and ultrasonic extraction (UE). The findings showed that soxhlet extraction gave a significantly higher oil yield compared to the other techniques used in this work (65.10% with p < 0.05), while cold pressing and ultrasonic extraction gave similar yields: 54.51% and 56.66%, respectively (p > 0.05). Chemical composition analysis was carried out by GC–MS and allowed 11 compounds to be identified, of which the major compound was linoleic acid (C18:2), with a similar percentage (between 57.08% and 57.84%) for the three extractions (p > 0.05). Regarding the carotenoid pigment, the extraction technique significantly affected its content (p < 0.05) with values between 10.11 mg/kg and 14.83 mg/kg. The chlorophyll pigment presented a similar content in both oils extracted by SE and UE (p > 0.05), 0.20 mg/kg and 0.16 mg/kg, respectively, while the lowest content was recorded in the cold-pressed oil with 0.13 mg/kg. Moreover, the analysis of phytosterols in walnut oil revealed significantly different contents (p < 0.05) for the three extraction techniques (between 1168.55 mg/kg and 1306.03 mg/kg). In addition, the analyses of tocopherol composition revealed that γ-tocopherol represented the main tocopherol isomer in all studied oils and the CP technique provided the highest content of total tocopherol with 857.65 mg/kg, followed by SE and UE with contents of 454.97 mg/kg and 146.31 mg/kg, respectively, which were significantly different (p < 0.05). This study presents essential information for producers of nutritional oils and, in particular, walnut oil; this information helps to select the appropriate method to produce walnut oil with the targeted quality properties and chemical compositions for the desired purpose. It also helps to form a scientific basis for further research on this plant in order to provide a vision for the possibility of exploiting these oils in the pharmaceutical, cosmetic, and food fields.     

Cassia alata,Coriandrum sativum,Curcuma longa and Azadirachta indica: Food Ingredients as Complementary and Alternative Therapies for Atopic Dermatitis-A Comprehensive Review

Traditional medicine is critical in disease treatment and management. Herbs are gaining popularity for disease management and treatment. Therefore, they can be utilised as complementary and alternative treatment (CAT) ingredients. Atopic dermatitis (AD) is one of the common non-communicable diseases. It is characterised by chronic inflammatory skin disease with intense pruritus and eczematous lesions. AD is associated with oxidative stress, microbial infection, and upregulation of inflammatory cytokines. Both children and adults could be affected by this skin disorder. The prevalence of AD is increasing along with the country’s level of development. This review revisited the literature on four medicinal herbs widely used as complementary medicine to manage AD. These therapeutic herbs are commonly eaten as food and used as spices in Asian cuisine. The four food herbs reviewed are Cassia alata, Coriandrum sativum, Curcuma longa Linn, and Azadirachta indica. Their traditional uses and phytochemical content will be covered. Four relevant pharmacological and biological activities of the plants crucial in AD management have been reviewed and discussed, including anti-inflammatory, anti-microbial, antioxidant, and wound recovery.     

Pharmacotherapeutics Applications and Chemistry of Chalcone Derivatives

Chalcones have been well examined in the extant literature and demonstrated antibacterial, antifungal, anti-inflammatory, and anticancer properties. A detailed evaluation of the purported health benefits of chalcone and its derivatives, including molecular mechanisms of pharmacological activities, can be further explored. Therefore, this review aimed to describe the main characteristics of chalcone and its derivatives, including their method synthesis and pharmacotherapeutics applications with molecular mechanisms. The presence of the reactive α,β-unsaturated system in the chalcone’s rings showed different potential pharmacological properties, including inhibitory activity on enzymes, anticancer, anti-inflammatory, antibacterial, antifungal, antimalarial, antiprotozoal, and anti-filarial activity. Changing the structure by adding substituent groups to the aromatic ring can increase potency, reduce toxicity, and broaden pharmacological action. This report also summarized the potential health benefits of chalcone derivatives, particularly antimicrobial activity. We found that several chalcone compounds can inhibit diverse targets of antibiotic-resistance development pathways; therefore, they overcome resistance, and bacteria become susceptible to antibacterial compounds. A few chalcone compounds were more active than conventional antibiotics, like vancomycin and tetracycline. On another note, a series of pyran-fused chalcones and trichalcones can block the NF-B signaling complement system implicated in inflammation, and several compounds demonstrated more potent lipoxygenase inhibition than NSAIDs, such as indomethacin. This report integrated discussion from the domains of medicinal chemistry, organic synthesis, and diverse pharmacological applications, particularly for the development of new anti-infective agents that could be a useful reference for pharmaceutical scientists.     

Proximity between reacting partners for diffusion-controlled growth of barium tungstate crystals from sodium tungstate melts

The separation distance (d₁₂) between a diffusing particle and its host necessary for a successful diffusion was estimated for diffusion-controlled crystal growth of BaWO₄ from Na₂WO₄ melts. Such distances slightly increased with increased cooling rates (R_T) and crystallization temperatures (T₀). The energy (E), enthalpy (ΔH_a), entropy (ΔS_a) and free-energy (ΔG_a) of activation, and the probability factor (P) were also estimated. These parameters did not change with the changes in R_T and T₀.     

Ion transfer voltammetry of amino acids with an all-solid-state ion-selective electrode for non-destructive phenylalanine sensing

Amino acids such as phenylalanine (Phe) are key building blocks of proteins and other biomolecules. Although recent advancements in electrochemical sensors have enabled the rapid detection of Phe, these sensors are often destructive as they irreversibly oxidise Phe. In addition, most of them rely on biorecognition elements, which suffer from limited stability at ambient conditions and sensitivity towards environmental fluctuations. Herein, we report the first example of ion transfer voltammetry of Phe using an all-solid-state ion-selective electrode (ISE). The reversibility of this technique enables both the sensor and the Phe sample to be reused. The optimal voltammetric ISE (VISE) exhibits near Nernstian response (56.8 mV/decade) towards Phe and selectivity against amino acids of all classes (hydrophobic, hydrophilic and charged). Voltammetric interrogation of the ISE significantly enhances sensitivity, linear range, selectivity, and stability as compared to traditional open circuit potential measurements. Phe levels in a commercial nutritional supplement and drinking waters were determined to demonstrate the viability of our sensor in real life applications. This proof-of-concept can be applied to develop VISEs for other amino acids and biological ions for healthcare and nutrition sensing.