Coinage metal complexes of 2-diphenylphosphino-3-methylindole

Coordination of P,N indolyl-phosphine ligands to Au(I), Ag(I) and Cu(I) metal ions under weakly basic conditions results in easy deprotonation of the indolyl N-H function and effective formation of a family of homo- and heterobimetallic complexes MM'(PPh(2)C(9)H(7)N)(2) (M = M' = Au (2), Ag (5); M = Au, M' = Cu (3), Ag (4)). The latter (4) exists as an inseparable mixture of four different complexes, which are in equilibrium driven by slow dynamics. The reaction of silver(I) and copper(I) ions with PPh(2)(C(9)H(8)N) affords a rare tetranuclear Z-shaped cluster Ag(2)Cu(2)(PPh(2)C(9)H(7)N)(4) (6), which exhibits red luminescence in solid state (650 nm) and a weak dual emission in solution with the main component in the near-IR region (746 nm).     

Role of the Polymer Matrix on the Photoluminescence of Embedded CdSe Quantum Dots

The photoluminescence (PL) of CdSe quantum dots (QDs) that form stable nanocomposites with polymer liquid crystals (LCs) as smectic C hydrogen‐bonded homopolymers from a family of poly[4‐(n‐acryloyloxyalkyloxy)benzoic acids] is reported. The matrix that results from the combination of these units with methoxyphenyl benzoate and cholesterol‐containing units has a cholesteric structure. The exciton PL band of QDs in the smectic matrix is redshifted with respect to QDs in solution, whereas a blueshift is observed with the cholesteric matrix. The PL lifetimes and quantum yield in cholesteric nanocomposites are higher than those in smectic ones. This is interpreted in terms of a higher order of the smectic matrix in comparison to the cholesteric one. CdSe QDs in the ordered smectic matrix demonstrate a splitting of the exciton PL band and an enhancement of the photoinduced differential transmission. These results reveal the effects of the structure of polymer LC matrices on the optical properties of embedded QDs, which offer new possibilities for photonic applications of QD–LC polymer nanocomposites.     

Fabrication of hollow multifunctional spheres containing MCM-41 nanoparticles and magnetite nanoparticles using layer-by-layer method

Macroscopic mesoporous silica spheres have been fabricated by alternatively depositing preformed MCM-41 nanoparticles and polyelectrolytes onto polystyrene lattices. High surface area hollow mesoporous spheres were obtained by removal of the core by solvent or calcination. Further, the versatility of the layer-by-layer (LBL) method was extended to fabricate magnetite-mesoporous silica composites by depositing magnetite and MCM-41 nanoparticles onto polystyrene beads. Such high surface area composites are important since the mesopores can be used for encapsulation of varied materials like enzymes and drugs while the presence of magnetite ensures application in biocatalysis and separation under magnetic field.     

Balance of hydrophobic and electrostatic forces in the pH response of weak polyelectrolyte capsules

A detailed study of the role of solution pH and ionic strength on the swelling behavior of capsules composed of the weak polyelectrolytes poly(4-vinylpyridine) (P4VP) and poly(methacrylic acid) (PMA) with different numbers of layers was carried out. The polyelectrolyte layers were assembled onto silicon oxide particles and multilayer formation was followed by zeta-potential measurements. Hollow capsules were investigated by scanning electron microscopy and atomic force microscopy. The pH-dependent behavior of P4VP/PMA capsules was probed in aqueous media using confocal laser scanning microscopy. All systems exhibited a pronounced swelling at the edges of stability, at pHs of 2 and 8.1. The swelling degree increased when more polymer material was adsorbed. The swollen state can be attributed to uncompensated positive and negative charges within the multilayers, and it is stabilized by counteracting hydrophobic interactions. The swelling was related to the electrostatic interactions by infrared spectroscopy and zeta-potential measurements. The stability of the capsules as well as the swelling degree at a given pH could be tuned, when the ionic strength of the medium was altered.     

Geometrical features of hydrogen bonded complexes involving sterically hindered pyridines

The ability of strongly sterically hindered pyridines to form hydrogen bonded complexes was inspected using low-temperature 1H and 15N NMR spectroscopy in a liquefied Freon mixture. The proton acceptors were 2,6-di(tert-butyl)-4-methyl- and 2,6-di(tert-butyl)-4-diethylaminopyridine; the proton donors were hydrogen tetrafluoroborate, hydrogen chloride, and hydrogen fluoride. The presence of the tert-butyl groups in the ortho positions dramatically perturbed the geometry of the forming hydrogen bonds. As revealed by experiment, the studied crowded pyridines could form hydrogen bonded complexes with proton donors exclusively through their protonation. Even the strongest small proton acceptor, anion F-, could not be received by the protonated base. Instead, the simplest hydrogen bonded complex involved the [FHF]- anion. This complex was characterized by the shortest possible N...F distance of about 2.8 A. Because the ortho tert-butyl groups did not prevent the hydrogen bond interaction between the protonated center and the anion completely, an increase of the pyridine basicity caused a further shortening of the N-H distance and a weakening of the hydrogen bond to the counterion.     

Conversion of Mg‐Li Bimetallic Alloys to Magnesium Alkoxide and Magnesium Oxide Ceramic Nanowires

Technologically important composites with enhanced thermal and mechanical properties rely on the reinforcement by the high specific strength ceramic nanofibers or nanowires (NWs) with high aspect ratios. However, conventional synthesis routes to produce such ceramic NWs have prohibitively high cost. Now, direct transformation of bulk Mg‐Li alloys into Mg alkoxide NWs is demonstrated without the use of catalysts, templates, expensive or toxic chemicals, or any external stimuli. This mechanism proceeds through the minimization of strain energy at the boundary of phase transformation front leading to the formation of ultra‐long NWs with tunable dimensions. Such alkoxide NWs can be easily converted in air into ceramic MgO NWs with similar dimensions. The impact of the alloy grain size and Li content, synthesis temperature, inductive and steric effects of alkoxide groups on the diameter, length, composition, ductility, and oxidation of the produced NWs is discussed.     

Reversibly permeable nanomembranes of polymeric microcapsules

Polymeric nanometer-thick membranes or nanomembranes possessing photocontrollable permeability are presented. Microcapsules are used as membrane model systems, while gold nanoparticle aggregates are used as active absorption centers. Upon laser light illumination the membranes change permeability reversibly because nanoparticles transiently affect the nearby polymeric network. Nanomembranes reseal to their impermeable state when the laser is switched off. This presents a novel and simple way of reversible permeability control of interest to intracellular signaling and membranes.     

Oxidation by oxygen and sulfur of Tin(IV) derivatives containing a redox-active o-amidophenolate ligand

Oxidation of tin(IV) o-amidophenolate complexes [Sn(ap)Ph(2)] (1) and [Sn(ap)Et(2)(thf)] (2) (ap=dianion of 4,6-di-tert-butyl-N-(2,6-diisopropylphenyl)-o-iminobenzoquinone (ImQ)) with molecular oxygen and sulfur in toluene solutions was investigated. The reaction of oxygen with 1 at room temperature forms a paramagnetic derivative [Sn(isq)(2)Ph(2)] (3) (isq=radical anion of ImQ) and diphenyltin(IV) oxide [{Ph(2)SnO}(n)]. Interaction of 1 with sulfur gives another monophenyl-substituted paramagnetic tin(IV) complex, [Sn(ap)(isq)Ph] (4), and the sulfide, [Ph(3)Sn](2)S. The oxidation of 2 with oxygen and with sulfur proceeds through the derivative [Sn(isq)(2)Et(2)] (7), which undergoes alkyl elimination to give two new tin(IV) compounds, [Sn(ap)(isq)Et] (5) and [Sn(ap)(EtImQ)Et] (6) (EtImQ=2,4-di-tert-butyl-6-(2,6-diisopropylphenylimino)-3-ethylcyclohexa-1,4-dienolate ligand), respectively, along with the corresponding alkyltin(IV) oxide and sulfide. Complexes 3-5 and 7 were studied by EPR spectroscopy. The structures of 3, 4 and 6 were investigated by X-ray analysis.     

High-resolution separation of peptides by sodium dodecyl sulfate-polyacrylamide gel "focusing"

As a follow-up of our previous report (Anal. Chem. 2007, 79, 821-827) on analytical SDS-PAGE focusing, a refinement of the method for separation of peptides in the small to medium M(r) range (0.5-10 kDa) is here reported, based on a shallow gradient of immobilized positive charges (0-10 mM) onto a minimally sieving polyacrylamide gel matrix (4%T, 2.5%C). Unlike conventional SDS-PAGE, which rarely can achieve the separations of polypeptide chains below a critical value of 10 kDa, the present method can be fine-tuned to perform such separations even down to a size of only 500 Da. In the case of larger fragments, the major peptide zones are shown, under microscope observation, to be composed by envelopes of bands as narrow as 20-100 microm, spaced at regular intervals of 100-150 microm. It is hypothesized that such larger peptides could form complexes with rather small SDS micelles and that such peptide-SDS complexes could differ in charge by just a single negative charge.     

Novel structurally characterized o-semiquinonato PCP-pincer nickel complexes

Structural study of dialkyl (PCP)-pincer o-semiquinonato nickel complexes indicated sloped relative positions of bi- and tri-dentate ligands. It became bright confirmation of propositions made on the base of their EPR spectra followed by molecular modelling.