The reactivity of the A-CH=N-NR-CX-B system. 1,3,4-Oxadiazoles and 2,3,4,5-tetrahydro-1,2,4-triazin-3-ones through the 1–5 and 1–6 cyclization reactions of α-thienylglyoxal monosemicarbazones

The factors influencing the reactivity of α-thienylglyoxal monosemicarbazones when treated with cyclizing reagents (bromine/sodium acetate and hydrobromic acid in acetic acid) were investigated. Depending on the experimental conditions, on the position of the substituent on the semicarbazide residue, and on the cyclizing agent, the substrates 1a-e give the semicarbazone bromides 2a-b, 5 , the 1,3,4-oxadiazoles 3a-c , the 1,2,4-triazine 11 and the 2,3,4,5-tetrahydro-1,2,4-triazine-3-ones 6, 8 and 9 . Compound 6 by thermolysis undergoes ring contraction in the Δ²-1,3,4-oxadiazoline 12 , while treatment with base involves the conversion of 6 into 1,2,4-triazol-5-one 13 . Ir, nmr and mass spectra support the reported structures.     

A more convenient and general procedure for O-monobenzylation of diols via stannylenes: a critical reevaluation of the Bu2SnO method

A more consistent, straightforward, and economical protocol for generation of stannylene species and their reaction with BnBr leading to products of O-monobenzylation of diols has been set. It has shown to be specially indicated for substrates bearing vicinal trans 1,2-diol moieties on cyclohexane backbones, which are more resistant to these transformations. Such protocol has been successfully applied to myo-inositol derivatives and acyclic diols.     

A new production method for carrier-free201Tl using IEN'S cyclotron in Rio De Janeiro

A new and simplified method was developed for the separation of thallium 201 which will allow the shipment of a “one shot generator” to distant places and easy elution at the destination. Thallium is produced as usually, through the reaction $${}^{nat}Tl/p,xn/^{201} pb\xrightarrow{{\beta ^ + }}{}^{201}Tl$$ with 24-MeV protons from IEN'S CV-28 cyclotron. The separation is based on the properties of a chelating carboxylic acid cation exchange resin column which at pH 4.5 retains lead while thallim is easily eluted. This column can also be used as a regular generator to produced greater quantities of²⁰¹Tl but at the expense of more elutions.     

Synthesis of 4H-3,1-benzoxazines, quinazolin-2-ones, and quinoline-4-ones by palladium-catalyzed oxidative carbonylation of 2-ethynylaniline derivatives

An effective and straightforward approach to the synthesis of 4H-3,1-benzoxazines 3 and 4, quinazolin-2-ones 5, and quinoline-4-one derivatives 6 and 7 is provided by palladium-catalyzed cyclization-alkoxycarbonylation of variously substituted 2-(trimethylsilanyl)ethynylaniline amide or urea derivatives 2. Reactions are carried out in 7:1 MeCN/MeOH at 65 or 75 degrees C in the presence of catalytic amounts of 10% Pd/C in conjunction with Bu(4)NI and KF and under 2.4 MPa of a 3:1 mixture of CO and air. Anti and syn 6-exo-dig cyclization modes account for the formation of the two stereoisomers. Isomerization of the vinylpalladium intermediate may occur as well. Formation of a double carbonylation product 7r and of a gem-dimethoxycarbonylation product 6s, whose structures have been determined by X-ray diffraction analysis, is justified through an unusual type of rearrangement.     

Rheology of a lyotropic mesophase through a stress-relaxation experiment

We report on the first rheological study of the structural relaxations in a nematic liquid crystalline phase. Linear dynamic and transient shear experiments were applied to a polydomain nematic phase of the CTAB/water system: a liquid crystalline mixture composed of 28 wt% CTAB at 35 degrees C. The decay of the shear modulus, G(t), was analyzed using the CONTIN inverse Laplace transform to obtain a distribution of relaxation times which were compared with ones from the usual fitting procedure based on a generalized Maxwell model. The behavior of the nematic lyotropic structure of the CTAB/water system is characterized by the presence of both slow and fast relaxation times. These were interpreted as being due to a progressive loss of the lyotropic domain orientation and to the breaking/reforming process of the cylindrical aggregates, respectively.     

1,2-Oxopalladation versus pi-allyl palladium route. A regioconvergent approach to a key intermediate for cyclopentanoids synthesis. New insights into the Pd(II)-catalyzed lactonization reaction

Regioconvergent synthesis of the key lactone 1 from an equimolar mixture of the two olefins 4 and 5 was achieved by unique Pd(II) chemistry. The synthetic versatility of lactone 1 has been demonstrated in the synthesis of iridoids and of the endo-Corey lactone 2, which is a key intermediate for the F(2)-isoprostane synthesis. Upon exposure of the sodium salts of 4 and 5 to a catalytic amount of Pd(OAc)(2) under oxygen, in the presence of AcOH, an isomeric lactone 12 was obtained in addition to the title compound 1. The Pd(II) lactonization was optimized by fine-tuning all the factors participating in the catalytic cycle: solvent, oxidant, co-oxidant, and Pd(II) source. The Hosokawa's heterobimetallic couple emerged as the catalyst of choice. With a Cu(II)-Pd(II) couple, the redox process was transferred to copper, and the formal oxidation state of palladium remained constant during the reaction. By virtue of this new methodology, lactone 1 was obtained in a rewarding 60% yield, along with isomeric lactone 12 in 30% yield. A detailed mechanistic study was carried out in order to elucidate the formation of lactones 1 and 12. Lactone 1 was formed from either olefin 8 or olefin 10; on the other hand, lactone 12 was formed exclusively from olefin 10. An intramolecular 1,2-acyloxypalladiation was invoked for the transformation of 8 into 1, whereas the pi-allyl complexes 13 and 11 were involved in the transformation of olefin 10 into 12 and 1, respectively.     

X-ray and mössbauer studies of tricyclohexyltin(IV) halides. The crystal structures of (cyclo-C6H11)3SnX (X = F,Br and I)

The structures of tricyclohexyltin fluoride (I), bromide (II) and iodide (III) have been determined by X-ray analysis. Compound I crystallizes in the space group P2₁/m with a = 10.422(6), b = 17.238(9), c = 5.769(3) Å, β = 104.6(1)° and Z = 2. Compounds II and III crystallize in the space group Pcmn with a = 10.427(6), b = 16.914(9), c = 11.366(6) Å, Z = 4; and a = 10.400(6), b = 16.900(10), c = 11.400(4) Å, Z = 4, respectively. All three structures consist of discrete tetrahedral (cyclo-C₆H₁₁)₃SnX units.The temperature dependence of the Mössbauer resonance areas has been examined in order to obtain information about the relationship between chemical structure and lattice dynamics.     

Single electron traps at the surface of polycrystalline MgO: assignment of the main trapping sites

Paramagnetic centers at the surface of ionic oxides in the form of trapped electrons can be generated by exposure of the material to alkali metal or hydrogen atoms or of molecular hydrogen under UV irradiation. For many years, it has been assumed that the resulting paramagnetic centers consist of oxygen vacancies filled by one electron. High-resolution electron spin resonance spectra and ab initio quantum chemical calculations show that the paramagnetic centers consist of (H(+))(e(-)) electron pairs formed at morphological irregularities of the surface. At least three different kinds of (H(+))(e(-)) centers, [A], [B], and [C], have been identified with abundances of 80%, 10%, and 8%, respectively. In this work, we compare a wide set of measured and computed g-factors and hyperfine coupling constants of the unpaired electron with the surrounding (25)Mg, (17)O, and (1)H nuclei and we propose a general assignment of the centers. (H(+))(e(-)) pairs formed at Mg(4c) ions at steps and edges account for species [A], centers formed at Mg(4c) ions at reverse corners correspond to species [B], and species [C] originates from (H(+))(e(-)) pairs formed at Mg(3c) ions at corners and kinks.     

Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Mechanisms of reduced human vascular cell migration after photodynamic therapy

Restenosis results from intimal hyperplasia and constrictive remodeling following cardiovascular interventions. Photodynamic therapy (PDT) has been shown to inhibit intimal hyperplasia in vivo by preventing neointimal repopulation of the treated vessel. This study was undertaken in an attempt to further dissect the mechanisms by which PDT acts on secreted and extracellular matrix proteins to inhibit migration of cultured human vascular cells. PDT of three-dimensional collagen gels inhibited invasive human smooth muscle cell (SMC) migration, whereas cell-derived matrix metalloproteinase production remained unaltered. Additionally, PDT generated cross-links in the collagen gels, a result substantiated in an ex vivo model whereby PDT rendered the treated vessels resistant to pepsin digestion and inhibited invasive migration of SMC and fibroblasts. These data support the premise that by inducing matrix protein cross-links, rendering the vessel resistant to degradation, in vivo PDT inhibits repopulation of the vessel and therefore intimal hyperplasia.