Profiling fatty acids in vegetable oils by reactive pyrolysis-gas chromatography with dimethyl carbonate and titanium silicate

A novel methodology in on-line pyrolysis-gas chromatography (Py-GC) for the fast analysis of fatty acids in vegetable oils with minimal sample treatment and the use of non-toxic reagents is described. Pyrolysis at 500 degrees C for 10 s of sub-microgram quantity of vegetable oil dissolved in dimethyl carbonate (DMC) and in the presence of nanopowder titanium silicon oxide resulted in the production of fatty acid methyl esters (FAMEs) as unique products. Pyrolysis performed by means of a resistively heated filament pyrolyser interfaced to a GC-MS apparatus enabled the direct analysis of evolved FAMEs. The DMC/Py-GC-MS analysis was tested on soybean, coconut, linseed, walnut and olive oil and the results compared to the classical BF(3)-methanol as reference methodology. The DMC method exhibited a lower precision and was biased towards lower levels of polyunsaturated fatty acids (PUFA) in comparison to the BF(3)-methanol method, but was more advantageous in terms of reduced sample treatment, waste generation and risk factors of employed chemicals.     

预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明，丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性，而且芳构化主要转化为苯；载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度，从而表现出最佳的芳构化性能；随着锌含量的增加，Zn/Al-CLM催化剂的酸量增大，从而使丙烷转化率增大，而选择性则是锌含量质量分数为5．8％时具有极大值；400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用，从而使得Zn/Al-CLM具有较高的芳烃收率。     

Chemical synthesis and firefly luciferase produced dehydroluciferyl-coenzyme A

Dehydroluciferyl-coenzyme A (L-CoA) was chemically synthesized and characterized by MS, UV-vis spectrometry and RP-HPLC. The identity of the chemically synthesized compound with the one that was produced by firefly luciferase was confirmed. Moreover, the reversibility of the enzymatic conversion of dehydroluciferin ? dehydroluciferyl-adenylate ? L-CoA was also confirmed. The chemical synthesis of L-CoA, described here, may help the clarification of the activator effect of CoA on luciferase bioluminescent assays, in which the enzyme catalyzed formation of L-CoA and the consequent destruction of L-AMP is one of the possible explanations for that effect.     

Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Lanthanide nitrate complexes with 2-azacyclononanone

Thermal behavior of rare earth nitrate complexes with 2-azacyclononanone (AZA) with Ln(NO₃)₃·3(AZA) composition (where Ln=Gd, Er and Ho) was analyzed in kinetic point of view. Kinetic parameters were calculated from thermogravimetric data. All obtained results were similar. The first decomposition step was representative to the loss of ligand and the residue was essentially Ln₂O₃. Furthermore, a reaction path was proposed for the thermal decomposition of the Ln(NO₃)₃·3(AZA).     

QUENCHING OF CHEMICALLY and ENZYMICALLY-GENERATED TRIPLET ACETONE BY TYROSINE and 3,5-DIHALOGENODERIVATIVES

Tyrosine and especially its 3,5-dihalogenoderivatives quench acetone triplets. When the excited acetone is generated free in solution, the Stern-Volmer plots for the quenching by these species, monitored via the sensitized emission of the 9,10-dibromoanthracene-2-sulfonate ion, are linear. When triplet acetone is generated enzymically by the peroxidase-catalyzed aerobic oxidation of isobutyral-dehyde, the Stern-Volmer plots for the quenching of the acetone phosphorescence curve upwards in the case of 3,5-dibromotyrosine and even more markedly with 3,5-diiodotyrosine. Quenching appears likely to occur by triplet-triplet energy transfer and especially in the case of the phenoxide form, also by electron transfer. The curvature denotes a static contribution to quenching favoured by the enzyme.     

Diastereoselective synthesis of α-amino-β-hydroxyacids

threo-α-Dibenzylamino-?-hydroxyesters (2) have been synthesised with high diastereoselectivity through the NaBH₄ reduction of α-dibenzylamino-β-oxoesters (4) and then tranformed into threo-α-amino-β-hydroxyacids.     

Thermodynamic properties of quinoxaline-1,4-dioxide derivatives: a combined experimental and computational study

The mean (N-O) bond dissociation enthalpies were derived for three 2-methyl-3-(R)-quinoxaline 1,4-dioxide (1) derivatives, with R = methyl (1a), ethoxycarbonyl (1b), and benzyl (1c). The standard molar enthalpies of formation in the gaseous state at T = 298.15 K for the three 1 derivatives were determined from the enthalpies of combustion of the crystalline solids and their enthalpies of sublimation. In parallel, accurate density functional theory-based calculations were carried out in order to estimate the gas-phase enthalpies of formation for the corresponding quinoxaline derivatives. Also, theoretical calculations were used to obtain the first and second N-O dissociation enthalpies. These dissociation enthalpies are in excellent agreement with the experimental results herewith reported.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Reactivity of peroxo forms of the vanadium haloperoxidase cofactor. A DFT investigation

Density functional theory has been used to investigate structural, electronic and reactivity properties of complexes related to the peroxo forms of vanadium haloperoxidases (VHPO). In particular, the reactivity of the cofactor as a function of protonation state and environment, which are two factors thought to be crucial in modulating the activity of the enzyme, has been examined. In full agreement with experimental data, results highlight the role of protonation in the activation of the peroxo-vanadium complexes and show that the oxo-transfer step involves the unprotonated axial peroxo oxygen atom, which is easily accessible to substrates in the peroxo form of the enzyme. The role of Lys353, which in the X-ray structure of the peroxide-bound form of vanadium chloroperoxidase is hydrogen bonded to the equatorial oxygen atom of the peroxo group, has been also explored. It is concluded that Lys353 can play a role similar to a H+ in the activation of the peroxo form of the cofactor.