Layer by layer complex architectures based on ammonium polyphosphate,chitosan and silica on polyester-cotton blends: flammability and combustion behaviour

Hybrid organic–inorganic coatings containing ammonium polyphosphate (APP), chitosan and silica have been deposited on polyester-cotton blends (PET-CO), exploiting the layer by layer assembly. To this aim, two different complex architectures (namely, chitosan/APP bilayers plus silica/silica bilayers or silica/silica/chitosan/APP quadlayers) have been thoroughly investigated. The effect of their morphologies on the flame retardancy properties of the fabrics (flammability and combustion behaviour) has been assessed. More specifically, some of the above complex architectures exhibited significant enhancements concerning flammability (i.e. the suppression of afterglow, together with a considerable final residue increase) and combustion behaviour as evidenced by cone calorimeter tests. A close relationship between the overall flame retardancy properties of the blends and the level of dishomogeneity of the LbL architectures has been shown.     

Electron capture ionization of explosives with a microflow rate particle beam interface

A method for the analysis of four widely used explosives based on reversed-phase liquid chromatography coupled to a quadrupole mass spectrometer is presented. A microflow rate particle beam interface was employed that offers simplified operation procedures and improved interfacing performance. A positive role played by the reduced size of the aerosol droplets generated by the microflow rate interface is outlined in this work. Greater vaporization efficiency and negligible thermal decomposition were observed for the selected compounds in the ion source of the mass spectrometer. Electron capture ionization allowed specific and sensitive determination of the analytes. Detection limits that ranged between 60 and 200 pg and had a signal-to-noise ratio of 5:1 were obtained in selected ion monitoring mode after column elution.     

Control of Protonated Schiff Base Excited State Decay within Visual Protein Mimics: A Unified Model for Retinal Chromophores

Artificial biomimetic chromophore-protein complexes inspired by natural visual pigments can feature color tunability across the full visible spectrum. However, control of excited state dynamics of the retinal chromophore, which is of paramount importance for technological applications, is lacking due to its complex and subtle photophysics/photochemistry. Here, ultrafast transient absorption spectroscopy and quantum mechanics/molecular mechanics simulations are combined for the study of highly tunable rhodopsin mimics, as compared to retinal chromophores in solution. Conical intersections and transient fluorescent intermediates are identified with atomistic resolution, providing unambiguous assignment of their ultrafast excited state absorption features. The results point out that the electrostatic environment of the chromophore, modified by protein point mutations, affects its excited state properties allowing control of its photophysics with same power of chemical modifications of the chromophore. The complex nature of such fine control is a fundamental knowledge for the design of bio-mimetic opto-electronic and photonic devices.     

Heat and moisture transfer in sol–gel treated cotton fabrics

Cotton fabrics have been treated by sol–gel processes in order to produce an inorganic coating on fibres, able to modify their thermal conductivity under an irradiating flow. To this aim, fabric specimens with different silica content have been tested following the ISO 6942 standard in order to establish the effect of the coating on coupled heat and moisture transfer through the cotton fibres. The collected results have been compared with those obtained by an optimized method using a cone calorimeter as the heating source. By this latter approach, it has been demonstrated that sol–gel cotton treated fabrics with high moisture uptake possess a significantly lower thermal conductivity with respect to cotton alone.     

Determination of benzotrifluoride derivative compounds in groundwater

Two simple analytical methods for the simultaneous determination and quantification of benzotrifluoride and eight chlorinated, amino and nitro benzotrifluoride derivatives in groundwater are proposed. Benzotrifluoride, 4-chlorobenzotrifluoride, 2,4-dichlorobenzotrifluoride and 3,4-dichlorobenzotrifluoride, were extracted by Purge-and-Trap on the basis of their volatile properties, while 3-aminobenzotrifluoride, 4-nitrobenzotrifluoride, 3-amino-4-chlorobenzotrifluoride, 3-nitro-4-chlorobenzotrifluoride and 4-chloro-3,5-dinitrobenzotrifluoride extractions were done with an automated SPE system. The analytical separations and detections were performed with two different GC systems, both equipped with single quadrupole mass spectrometer as detector. The LOD ranges for the two methods were 0.002–0.005 μg L⁻¹ and 0.01–0.07 μg L⁻¹, respectively. Both extraction methods were developed using spiked Milli-Q water and were then demonstrated with groundwater samples collected during autumn 2008. The areas of groundwater collection were polluted due to an episode of improper industrial soil disposal and consequent leakage of aliphatic and aromatic, fluorinated chemicals into the groundwater. This work eventually revealed the presence of several benzotrifluoride compounds most of them, like dichloro- and amino-derivatives, never been reported as environmental contaminants.     

Nitrogen,phosphorus and organics removal in two vertical flow experimental wetlands receiving pretreated municipal wastewater

Pollutants removal in two vertical flow experimental wetlands receiving pre-treated municipal wastewater was investigated. Laboratory investigations using microcosms were also carried out in order to identify key processes regulating pollutants removal. Results obtained from experimental wetlands seem to confirm the ability of a single stage installation, where nitrification and denitrification processes are jointly optimised using a gravel medium, always wet but not saturated with water. Results obtained from microcosm investigations show the prominent role of O2 supply, of microbial activity and of bio-available C from vegetal metabolism in the nitrogen removal.     

Photochemical Bromination of 2,5-Dimethylbenzoic Acid as Key Step of an Improved Alkyne-Functionalized Blue Box Synthesis**

Cyclobis(paraquat-p-phenylene), also known as “blue box”, is a highly electron-deficient macrocycle, widely used as a molecular receptor for small electron-rich molecules. Inserting a reactive functional group onto the molecular structure of this cyclophane is paramount for its inclusion into complex architectures. To this aim, including an alkyne moiety would be ideal, because it can participate in click reactions. However, the synthesis of such alkyne-functionalized cyclophane suffers from several drawbacks: the use of toxic and expensive CCl₄, the need for high-pressure reactors, and overall low yield. We have revised the existing synthesis of this cyclophane derivative bearing an alkyne moiety, to overcome all these limitations. In particular, photochemical radical bromination is adopted to obtain a sensitive intermediate. We demonstrated that the synthesized host molecule can be functionalized via click reactions and take part in radical-radical interactions. Our work makes a key functionalized paraquat macrocycle more accessible, facilitating the development of novel redox-responsive systems.     

Synthesis of Indenes via Graphene Oxide Mediated Manipulation of Morita-Baylis-Hillman Alcohols

A new metal-free synthetic approach to functionalized indenes is documented. The use of commercially available graphene oxide (GO) allowed the direct access to indenyl cores (yield up to 80 %) via intramolecular Friedel-Crafts-type allylic alkylations with readily available Morita-Baylis-Hillman alcohols. Combined experimental and spectroscopic investigations contributed to shed light on the reaction mechanism dealing with a nanostructured carbon material-based C−C bond forming reaction.     

Effect of Photosensitizer Delivery System and Irradiation Parameters on the Efficiency of Photodynamic Therapy of B16 Pigmented Melanoma in Mice

Abstract— Previous studies (Biolo et al., Photochem. Photobiol. 59, 362-365, 1994) showed that liposome-delivered Si(IV)-na-phthalocyanine (SiNc) photosensitizes B16 pigmented melanoma subcutaneously transplanted in C57 mice to the action of 776 nm light. However, the efficacy of the phototreatment was limited by a lack of selectivity of tumor targeting by SiNc as well as by incomplete necrosis of the neoplastic mass. The present investigations show that the use of a different delivery system (Cremophor emulsion vs liposomes of dipalmitoylphosphatidylcholine) causes no significant increase in the selectivity of tumor targeting for three injected doses of SiNc (0.5, 1, 2 mg/kg). However, upon 776 nm light irradiation (300 mW/cm²; 520 J/cm²), the delay in the rate of tumor growth was maximal (7-8 days) for the highest naphthalocyanine dose. On the other hand, a remarkable improvement in the tumor response was obtained by inducing an intratumoral temperature increase to 44°C immediately after PDT. The thermal effect appeared to be due to photoexcitation of melanin by 776 nm light (550 mW/cm²; 520 J/cm²) and subsequent partial conversion of absorbed energy into heat.