Charge heterogeneity of recombinant pro-urokinase and urinary urokinase, as revealed by isoelectric focusing in immobilized pH gradients

When analysing homogeneous preparations of recombinant pro-urokinase and urinary urokinase by isoelectric focusing (IEF) in immobilized pH gradients, an extreme charge heterogeneity was detected (at least ten major and ten minor bands in the pH range 7–10). This extensive polydispersity was not caused by different degrees of glycosylation, or by IEF artefacts, such as binding to carrier ampholytes or carbamylation by urea. A great part of this heterogeneity could be traced back to the existence of a multitude of protein molecules containing Cys residues at different oxidation levels (-SH, -S-S-, even cysteic acid). Owing to the very large number of Cys residues in pro-urokinase (24 out of a total of 411 amino acids) and to the relatively high pI of its native forms (pI 9.5–9.8; the native form is believed to contain all Cys residues as -S-S- bridges), the presence of SH or cysteic acid residues would increase the negative surface charge, as even SH groups would be extensively ionized. In pro-urokinase, part of the heterogeneity was also due to spontaneous degradation to urokinase and possibly also to cleavage into lower-molecular-mass fragments. When all these causes of heterogeneity were removed, the pI spectrum was reduced to only four, about equally intense, bands. The cause of this residual heterogeneity is unknown.     

Methyl and silyl mesolytic dissociations in the radical cations and radical anions of but-1-ene,allylsilane, hexa-1,3-diene,and penta-2,4-dienylsilane. CAS-MCSCF and coupled cluster theoretical study

Methyl or silyl dissociation in the CH(2)=CHCH(2)-XH(3) (a-XH(3)(*)(+)) and CH(2)=CHCH=CHCH(2)-XH(3) (p-XH(3)(*) (+)) radical cations (X = C, Si) yields a(+) or p(+) and XH(3)(*). Similarly, the radical anions a-CH(3)(*) (-) and p-CH(3)(*) (-) give the pi-delocalized anion and CH(3)(*) preferentially. In contrast, a-SiH(3)(*) (-) and p-SiH(3)(*-) prefer to dissociate into the pi-delocalized radical and silide. All reactions are endoergic: by 43-50 kcal mol(-)(1) in the radical cations, and easier to some extent in the radical anions, that require 29-33 (X = C) and 13-14 kcal mol(-)(1) (X = Si). The fragmentation energy profiles do not present significant barriers for the backward process in the case of the radical cations. All radical anions exhibit an energy maximum along the dissociation pathway, but the barrier is lower than the dissociation limit. Fragmentation is "activated" more in the anions than in the cations with respect to homolysis in the corresponding neutrals (that requires 72-81 kcal mol(-)(1)). Wave function analysis indicates that the C-X bond cleavage in the hydrocarbon radical ions, although formally comparable to a homolytic process, is at variance with this model, due to the spin recoupling of one of the two C-X bond electrons with the originally unpaired electron. This is basically true also for the silyl-substituted radical anions, in which the initial more delocalized charge distribution might suggest some heterolytic character of the bond cleavage.     

A DFT study on the 1,3-dipolar cycloaddition reactions of C-(methoxycarbonyl)-N-methyl nitrone with methyl acrylate and vinyl acetate

In the 1,3-dipolar cycloaddition of glyoxylic nitrones with electron-poor and electron-rich alkenes, the configurational instability of the nitrone leads to parallel models when regio- and stereoselectivities are rationalized. The energetics of the cycloaddition reactions have been investigated through molecular orbital calculations at the B3LYP/6-31-G(d) theory level. By studying different reaction channels and reagent conformations, leading to a total of sixteen transition structures for each dipolarophile, the regio- and stereochemical preferences of the reaction are discussed.     

Simple and efficient chemoselective mild deprotection of acetals and ketals using cerium(III) triflate

A new and chemoselective method for the cleavage of alkyl and cyclic acetals and ketals at room temperature in wet nitromethane by using catalytic cerium(III) trifluoromethane sulfonate is presented. The high yields, the observed selectivity, the very gentle reaction conditions, and the almost neutral pH make this procedure particularly attractive for multistep synthesis.     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

Der mikrochemische Nachweis des Anabasins und seine Unterscheidung von Nikotyrin und Nikotin

Zusammenfassung Das Problem des Nachweises von Anabasin und seiner Unterscheidung von den Alkaloiden Nikotin und Nikotyrin wurde untersucht. In der Goldbromwasserstoffsäure, Platinbromwasserstoffsäure, Wismutbromwasser-stoffsäure und im Cadmiumbromid wurden Reagenzien gefunden, die für den Nachweis und die Unterscheidung dieser Alkaloide sehr gut geeignet sind.Das Verhalten des Nikotins mit zahlreichen Reagenzien wurde eingehend untersucht. Einige der hierbei erhaltenen Verbindungen wurden beschrieben.

---

Summary The problem of detecting anabasin and its differentiation from the alkaloids nicotine and nicotyrine was studied. Auribromhydric acid, bromoplatinic acid, bromobismuthic acid and cadmium bromide were found to be reagents suitable for the detection and differentiation of these alkaloids.An extended study was made of the behavior of nicotine toward numerous reagents. Some of the compounds obtained in this investigation are described.

---

Rèsumè Etude du problème de l'identification de l'anabasine et de sa différenciation des alcaloïdes nicotine et nicotyrine. On a constaté que les acides aurichlorhydrique, platibromhydrique, bismuthobromhydrique, et le bromure de cadmium étaient des réactifs convenant parfaitement à l'identification et la différenciation de ces alcaloïdes. Le comportement de la nicotine en présence de nombreux réactifs a été soigneusement étudié. L'auteur décrit les combinaisons obtenues lors de ces réactions.

     

Sorption equilibrium of methanol on new composite sorbents “CaCl<Subscript>2</Subscript>/silica gel”

This paper presents experimental data on methanol sorption on new composite sorbents which consist of mesoporous silica gels and calcium chloride confined to their pores. Sorption isobars and XRD analysis showed the formation of a solid crystalline solvate CaCl₂⋅2MeOH at low methanol uptake, while at higher uptake the formation of the CaCl₂–methanol solution occurred. The solution confined to the silica pores showed the sorption properties similar to those of the CaCl₂–methanol bulk solution. Calorimetric and isosteric analyses showed that the heat of methanol sorption depends on the methanol uptake, ranging from 38±2 kJ/mol for the solution to 81±4 kJ/mol for the solid crystalline phase CaCl₂⋅2MeOH. The above mentioned characterizations allowed the evaluation of the methanol sorption and the energy storage capacities, clearly showing that the optimal applications of these new composite sorbents are the methanol removal from gaseous mixtures, heat storage and sorption cooling driven by low temperature heat.     

Density and Volume Properties of the 2-Chloroethanol + 2-Methoxyethanol + 1,2-Dimethoxyethane Ternary Solvent System at Different Temperatures

The density of the 2-chloroethanol (CE) + 2-methoxyethanol (ME) + 1,2-dimethoxye- thane (DME) ternary mixtures has been measured at different temperatures ranging from –10 to 80^°C, and over the entire composition range. The experimental data have been used to check the validity of some relationships accounting for the dependence of the density on temperature and composition domains. Starting from the primary data, some derived quantities, such as excess molar volumes V ^E, partial molar volumes and partial excess molar volumes , have been obtained. In these mixtures, V ^E is always positive for the [CE(1) + ME(2)] binaries, while it is generally negative at all other experimental conditions, showing the greatest deviations along the binary axes corresponding to the binary subsystems in the sequence [CE(1) + DME(2)] < [CE(1) + ME(2)] < [ME(1) + DME(2)]. The results are compared and discussed to in terms of changes in molecular association and structural effects in these solvent systems.     

A comparison between different techniques for the isolation of rosemary essential oil

Traditional hydrodistillation (HD), supercritical fluid extraction (SFE), organic solvent extraction (SE), and water microwave assisted hydrodistillation (MAHD) techniques were compared and evaluated for their effectiveness in the isolation of rosemary essential oil. The microwave assisted hydrodistillation technique was optimized in terms of both delivered power and time duration. The extracts/distillates were analyzed by GC and GC-MS. Microwave distillation, which exploits the physical action of microwaves on plants, showed a series of advantages over the other approaches: low cost, use of water in sample pre-treatment step, greatly reduced isolation time, and attainment of high quality essential oil distillate. Moreover, the absence of environmental impact of this innovative technique was also emphasized.     

Environmental effects on a prion's helix II domain: copper(II) and membrane interactions with PrP180-193 and its analogues

An abnormal interaction between copper and the prion protein is believed to play a pivotal role in the pathogenesis of prion diseases. Copper binding has been mainly attributed to the N-terminal domain of the prion protein, but this hypothesis has recently been challenged in some papers which suggest that the C-terminal domain might also compete for metal anchoring. In particular, the segment corresponding to the helix II region of the prion protein, namely PrP180-193, has been shown both to bind copper and to exhibit a copper-enhanced cytotoxicity, as well as to interact with artificial membranes. The present work is aimed at extending these results by choosing the most representative model of this domain and by determining its copper affinity. With this aim, the different role played by the electrostatic properties of the C- and N-termini of PrP180-193 (VNITIKQHTVTTTT) in determining its conformational behaviour, copper coordination and ability to perturb model membranes was investigated. Owing to the low solubility of PrP180-193, its copper affinity was evaluated by using the shorter PrPAc184-188NH2 (IKQHT) analogue as a model. ESI-MS, ESR, UV/Vis, and CD measurements were carried out on the copper(II)/PrPAc184-188NH2 and copper(II)/PrP180-193NH2 systems, and showed that PrPAc184-188NH2 is a reliable model for the metal interaction with the helix II domain. The affinity of copper(II) for the helix II fragment is higher than that for the octarepeat and PrP106-126 peptides. Finally, the different ability of PrP180-193 analogues to perturb the DPPC model membrane was assessed by DSC measurements. The possible biological consequences of these findings are also discussed briefly.