Resonantly enhanced off-specular X-ray scattering from polymer/polymer interfaces<Superscript>⋆</Superscript>

We have used measurements of the absolute intensity of diffuse X-ray scattering to extract the interfacial tension of a buried polymer/polymer interface. Diffuse scattering was excited by an X-ray standing wave whose phase was adjusted to have a high intensity at the polymer/polymer interface and simultaneously a node at the polymer/air interface. This method permits the capillary-wave-induced roughness of the interface, and hence the interfacial tension, to be measured independently of the polymer/polymer interdiffusion.     

Harmonic and intermodulation distortion modeling in IM-DD multi-band radio over fiber links exploiting injection locked lasers

A comprehensive numerical tool has been developed for the evaluation of the performances of Radio over Fiber (RoF) links intended for wireless signal distribution.At the transmitter end an appropriate set of rate equations allows to model the optical source as a solitary laser or as an appropriately injection locked laser. The optical channel is modeled putting into account the combined effect of fiber dispersion, laser source non ideal performances (e.g. non-linear effects, frequency chirp), and quadratic detection of the receiving photodiode. The simulation model developed can be a useful tool at the design stage allowing a preliminary evaluation of the characteristics of real RoF links.     

Influence of the Grain Boundaries on the Heat Transfer in Laser Ceramics

Grain boundaries play a key role in determining several key properties of polycrystalline laser ceramics. Heat transfer measurements at low temperature constitute a good tool to probe grain boundaries. We review the results of heat transfer measurements in polycrystalline Y₃Al₅O₁₂ garnets as well as Y₂O₃ and Lu₂O₃ sesquioxide materials obtained by self-energy-driven sintering of nano-particles. The average phonon mean free path in Y₃Al₅O₁₂ was found to be significantly larger than the average grain size and to scale with temperature as T ⁻² at low temperature. Existing models describing the interaction between phonons and grain boundaries are reviewed. Correct temperature dependence of the mean free path and order of magnitude of scattering rates were found by assuming the existence of a grain boundary layer having acoustic properties different from those of the bulk. A different temperature dependence of phonon mean free path was found for the sesquioxides and was ascribed to the stronger elastic anisotropy of these materials. The thermal resistance associated to the grain boundaries of laser ceramics was found to be lower than in other dense polycrystalline ceramic materials reported in the literature.     

Growth and laser properties of Nd<Superscript>3+</Superscript>:Sr<Subscript>6</Subscript>YSc(BO<Subscript>3</Subscript>)<Subscript>6</Subscript> crystal

The crystal of Nd³⁺:Sr₆YSc(BO₃)₆ with dimensions of O 19×42 mm³ was grown by the Czochralski method. It’s spectral and laser properties have been investigated. The absorption cross section is 1.47×10^-20 cm² with a FWHM 12.0 nm at 807 nm, the emission cross section is 1.57×10^-19 cm² at 1060 nm, and the fluorescence lifetime is 76 μs at room temperature. The maximum laser output is 25.7 mJ at 1.06 μm pumped by a single Xenon flash lamp and the overall and average slope efficiencies are 0.12% and 0.09%, respectively. The laser energy threshold value is 1.28 J. PACS 42.55.Rz; 42.70.Hj; 78.20.-e     

Calorimeter energy calibration using the energy conservation law

A new calorimeter energy calibration method was developed for the proposed ILC detectors. The method uses the center-of-mass energy of the accelerator as the reference. It has been shown that using the energy conservation law it is possible to make ECAL and HCAL cross calibration to reach a good energy resolution for the simple calorimeter energy sum.      

The real solution to scalar field equation in 5D black string space

After the nontrivial quantum parameters Ω _n and quantum potentials V _n obtained in our previous research, the circumstance of a real scalar wave in the bulk is studied with the similar method of Brevik and Simonsen (Gen. Rel. Grav. 33:1839, 2001). The equation of a massless scalar field is solved numerically under the boundary conditions near the inner horizon r _e and the outer horizon r _c . Unlike the usual wave function Ψ_ωl in 4D, quantum number n introduces a new functions Ψ_{ωl n} , whose potentials are higher and wider with bigger n. Using the tangent approximation, a full boundary value problem about the Schrödinger-like equation is solved. With a convenient replacement of the 5D continuous potential by square barrier, the reflection and transmission coefficients are obtained. If extra dimension does exist and is visible at the neighborhood of black holes, the unique wave function Ψ_{ωl n} may say something to it.     

Vibrational dynamics of the organometallic compound triarylorganoantimony (V) SbPh<Subscript>3</Subscript>[O<Subscript>2</Subscript>CC(OH)Ph<Subscript>2</Subscript>]<Subscript>2</Subscript>

A complete normal coordinate analysis was performed for five-coordinate non-rigid triarylantimony diester SbPh₃(O₂CR)₂, known to be a bioactive molecule, using Wilson G-F matrix method and Urey Bradley force field. The study of vibrational dynamics was performed using the concept of group frequencies and band intensities.      

Solvent and pH Effects on the Fluorescence of 7-(Dimethylamino)-2-Fluorenesulfonate

A novel water-soluble solvatochromic molecule, 7-(dimethylamino)-2-fluorenesulfonate (2,7-DAFS), was prepared by a three-step reaction from 2-nitrofluorene in good overall yield. The pH and solvent effects on the UV-VIS absorption and fluorescence spectra of 2,7-DAFS have been studied. Protonation of the dimethylamino group switches the absorption from intramolecular charge-transfer (ICT) to π → π* transition. The ground state pKa value of 2,7-DAFS was determined as 4.51. The fluorescence spectrum of the excited basic form, *(DAFS), shows a structureless single band with a large Stokes shift, whereas that of the acidic form, *(⁺HDAFS), exhibits a structured band with a small Stokes shift. The emission intensities of the basic and acidic forms versus pH/Ho plots show stretched sigmoidal curves and indicate that (1) the rate of deprotonation of *(⁺HDAFS) is comparable to the fluorescence decay of the species, and (2) the efficient proton-induced quenching of *(DAFS) fluorescence occurs. The pKa* was estimated as −1.7 from the fluorescence titration curve. The fluorescence maximum of *(DAFS) is blue-shifted as the polarity of solvent decreases. However, no clear dependency of the emission intensity and spectral half width, and thus fluorescence quantum yield, on the solvent polarity was revealed. It appears that the fluorescence sensitivity of 2,7-DAFS is 15 ∼ 25 times greater than the sensitivity of a widely utilized fluorescent probe, 5-(dimethylamino)-1-naphthalenesulfonate. This higher sensitivity, together with the ease of derivatization, would provide the fluorene-based fluorescent molecules significant advantages for a variety of applications.     

Langmuir-Blodgett self-assembly and electrochemical catalytic property of FePt magnetic nano-monolayer

Dispersed-well FePt nanoparticles with particle size ~5 nm have been prepared by hydrazine hydrate reduction of H₂PtCl₆·6H₂O and FeCl₂·4H₂O in ethanol–water system. By employing as-synthesized FePt nanoparticles, the monolayer can be formed by LB Technique. The structural, magnetic properties and electrochemical properties of FePt monolayer were respectively studied by XRD, TEM, VSM and CHI 820 electrochemical workstation. The as-synthesized particle has a chemically disordered fcc structure and can be transformed into chemically ordered fct structure after annealing treatment above 400°C. The coercivity of ordered fct FePt phase can be up to 2515Oe. CVs of 0.5 M H₂SO₄/0.5M CH₃OH on GCE modified with FePt nanoparticles monolayer films illustrate that the as-synthesized FePt is a kind of active electrochemical catalyst.