Evaluating the biological potential of some new cobalt (II) complexes with acrylate and benzimidazole derivatives

This paper presents the synthesis, physico‐chemical and biological properties of four new coordination compounds with mixed ligands: acrylate ion (acr) and benzimidazole/benzimidazole derivatives with the general formula [Co(L) ₂ (acr) ₂ ]·nH ₂ O [ (1) L: benzimidazole (HBzIm), n: 0.5; (2) L: 2‐methylbenzimidazole (2‐MeBzIm), n: 0.5; (3) L: 5‐methylbenzimidazole (5‐MeBzIm), n: 0; (4) L: 5,6‐dimethylbenzimidazole (5,6‐Me₂BzIm), n: 0]. Their chemical formulae were achieved correlating the chemical analysis with mass spectrometry data, the ligands coordination modes were assigned by Fourier transform‐infrared measurements, and the trigonal bipyramidal geometry of cobalt ion in complexes was assigned by data correlation of UV–Vis‐NIR spectra and magnetic moments measurements. Single‐crystal X‐ray diffraction reveals a mononuclear structure with a pentacoordinated cobalt (II) ion, connected to two acrylato coordinated in different modes and two unidentate 5,6‐dimethylbenzimidazole ligands for compound (4) . The biological tests were performed against several microbial strains, the cytotoxicity was evaluated on HCT8 cellular lines and the cell cycle analysis was performed on HT29 cellular lines. Microbiological assays indicated that Co (II) complexes present a very good to good activity against Candida albicans 1760, Enterococcus faecium E5, Bacillus subtilis ATCC 6683 and Escherichia coli ATCC 25922. Predictive pharmacokinetic (ADME), toxicity and drug‐likeness profiles were evaluated for Co (II) complexes. Our results highlight that Co (II) complexes depicted in the present study are suitable to be used as efficient pharmacological agents.     

Investigation of multiaxis molecular motion by off-magic angle spinning deuteron NMR

The relatively new deuteron NMR method of off-axis-magic angle spinning (OMAS) has been extended and used to investigate multiaxis rotational jump motion. Floquet theory is developed for simulating deuteron OMAS spectra with multisite jumps at different rates about noncoincident axes, and efficient procedures are presented for computing the sideband line shapes. It is demonstrated experimentally that reproducible adjustment of the angle between the rotor axis and the static magnetic field is feasible with precision approaching +/- 0.01 degrees. This leads to the reintroduction of a scaled, first-order quadrupole coupling that defines a new kinetic window and makes deuteron OMAS much more sensitive than ordinary magic angle spinning to motion on the kilohertz time scale. Temperature-dependent deuteron OMAS line shapes of octanoic acid/urea-d4 inclusion compound have been recorded and fitted, using least-squares procedures, to provide rates of rotation about both CN and CO bonds. The Arrhenius activation parameters for rotation about CN bonds, Ea = 60.4+/-2.4 kJ/mol and ln(A) = 24.9+/-0.3, agree well with previous values determined by selective inversion experiments. However, OMAS yields Ea = 26.3+/-0.4 kJ/mole and ln(A) = 24.9+/-0.3 for whole-body rotation about the CO bond axis in contrast to previous analysis of static quadrupole echo (QE) line shapes which gave Ea = 22.3+/-0.3 kJ/mole and ln(A) = 24.8+/-0.6 for the same sample. The underlying homogeneous linewidths of OMAS spectra are much smaller than those of QE spectra, and this provides higher precision and less systematic error in the determination of rates.     

Convergent synthesis of isomeric pairs of metallocene-containing polyether macrocycles

A general method for rapid construction of metallocene-based hosts is described. Treatment of polyether bridged bis(diphenylacetylenes) with a source of cyclopentadienyl cobalt at high temperature leads, via macrocyclization and capture of the intermediate cyclobutadiene, to macrocyclic systems tethered to an integral metallocene platform. Equal yields of the two possible structural isomers, the products of parallel or antiparallel cycloaddition of the precursor, are obtained. A combination of X-ray crystallography and NMR is employed to assign structures to the individual isomers and to assess the strength of lithium ion binding by the individual macrocycles.     

Internal standard signal suppression by co-eluting analyte in isotope dilution LC-ESI-MS

The suppression of the internal standard by increasing concentrations of the co-eluting analyte in calibration series and plasma samples analysed by LC-ESI-MS was studied using the isotope dilution technique. A series of three analyte/deuterated analyte pairs including fexofenadine/d6-fexofenadine, dapsone/d4-dapsone and peudoephedrine/d3-ephedrine were investigated. Suppression of the internal standard signal was noticed in extracted plasma samples containing fexofenadine and d6-fexofenadine as internal standard, as well as in solvent based calibration solutions of the three pair of compounds noted above during LC-ESI-MS analysis at flow rates greater than 100 microL min(-1). This signal suppression effect was described by invoking Enke's model of electrospray ion generation. This model suggests that signal suppression can be ascribed to the competition between ionic species for charged surface sites present on the generated droplets during the electrospray process. The slopes of the calibration curves of the three analytes were close to unity (fexofenadien/d6-fexofenadine 0.964 +/- 0.008, pseudoephedrine/d3-ephedrine 1.02 +/- 0.080 and dapsone/d4-dapsone 0.905 +/- 0.048) as predicted by the model, indicating that quantitation should not be affected by the variation in the peak area of the internal standard.     

Melt block copolymerization of ϵ-caprolactone and L-lactide

AB block copolymers of ϵ-caprolactone and (L )-lactide could be prepared by ring-opening polymerization in the melt at 110°C using stannous octoate as a catalyst and ethanol as an initiator provided ϵ-caprolactone was polymerized first. Ethanol initiated the polymerization of ϵ-caprolactone producing a polymer with ϵ-caprolactone derived hydroxyl end groups which after addition of L -lactide in the second step of the polymerization initiated the ring-opening copolymerization of L -lactide. The number-average molecular weights of the poly(ϵ-caprolactone) blocks varied from 1.5 to 5.2 × 10³, while those of the poly(L -lactide) blocks ranged from 17.4 to 49.7 × 10³. The polydispersities of the block copolymers varied from 1.16 to 1.27. The number-average molecular weights of the polymers were controlled by the monomer/hydroxyl group ratio, and were independent on the monomer/stannous octoate ratio within the range of experimental conditions studied. When L -lactide was polymerized first, followed by copolymerization of ϵ-caprolactone, random copolymers were obtained. The formation of random copolymers was attributed to the occurrence of transesterification reactions. These side reactions were caused by the ϵ-caprolactone derived hydroxyl end groups generated during the copolymerization of ϵ-caprolactone with pre-polymers of L -lactide. The polymerization proceeds through an ester alcoholysis reaction mechanism, in which the stannous octoate activated ester groups of the monomers react with hydroxyl groups. © 1997 John Wiley & Sons, Inc.     

A New Flavanone from Chromolaena tacotana (Klatt) R. M. King and H. Rob,Promotes Apoptosis in Human Breast Cancer Cells by Downregulating Antiapoptotic Proteins

Chromolaena tacotana is a source of flavonoids with antiproliferative properties in human breast cancer cells, the most common neoplasm diagnosed in patients worldwide. Until now, the mechanisms of cell death related to the antiproliferative activity of its flavonoids have not been elucidated. In this study, a novel flavanone (3′,4′-dihydroxy-5,7-dimethoxy-flavanone) was isolated from the plant leaves and identified by nuclear magnetic resonance (NMR) and mass spectrometry (MS). This molecule selectively inhibited cell proliferation of triple-negative human breast cancer cell lines MDA-MB-231 and MCF-7 whit IC₅₀ values of 25.3 μg/mL and 20.8 μg/mL, respectively, determined by MTT assays with a selectivity index greater than 3. Early and late pro-apoptotic characteristics were observed by annexin-V/7-AAD detection, accompanied by a high percentage of the Bcl-2 anti-apoptotic protein inactivated and the activation of effector Caspase-3 and/or 7 in breast cancer cells. It was verified the decreasing of XIAP more than Bcl-2 anti-apoptotic proteins expression, as well as the XIAP/Caspase-7 and Bcl-2/Bax complexes dissociation after flavanone treatment. Docking and molecular modeling analysis between the flavanone and the antiapoptotic protein XIAP suggests that the natural compound inhibits XIAP by binding to the BIR3 domain of XIAP. In this case, we demonstrate that the new flavanone isolated from leaves of Chomolaena tacotana has a promising and selective anti-breast cancer potential that includes the induction of intrinsic apoptosis by downregulation of the anti-apoptotic proteins XIAP and Bcl-2. New studies should deepen these findings to demonstrate its potential as an anticancer agent.     

Sensitized Photochemical CO2 Reduction by Hetero-Pacman Compounds Linking a ReI Tricarbonyl with a Porphyrin Unit

The hetero-Pacman architecture places two different metal coordination sites in close proximity, which can support efficient energy and/or electron transfer and allow for cooperative activation of small molecules. Here, the synthesis of dyads consisting of a porphyrin unit as photosensitizer and a rhenium unit as catalytically active site, which are held together by the rigid xanthene backbone, is presented. Mononuclear [(NN)Re(CO)₃(Cl)] complexes for CO₂ reduction in which NN represents a bidentate diimine ligand (e.g., bipyridine or phenanthroline) lack light absorption in the visible region, resulting in poor photocatalysis upon illumination with visible light. To improve their visible-light absorption, we have focused on the incorporation of a strongly absorbing free base or zinc porphyrin unit. Resulting photocatalytic experiments showed a strong dependence of the catalytic performance on both the type of photosensitizer and the excitation wavelengths. Most notably, the intramolecular hetero-Pacman system containing a zinc porphyrin unit showed much better catalytic activity in the visible region (excitation wavelengths >450 nm) than the free base porphyrin version or the corresponding mononuclear rhenium compound or an intermolecular system comprised of a 1:1 mixture of the mononuclear analogues.     

Applying the hydrodistillation process to Pentadiplandra brazzeana Baill. root: a chemical assessment

A chemical study of the volatile components obtained by applying the hydrodistillation and reflux processes to Pentadiplandra brazzeana roots was performed by GC-FID and GC-MS. The hydrodistillation process showed a total yield of 0.97% with 0.11% of essential oil and 0.86% of volatile compounds from the aqueous reaction medium; in the reflux process, the volatile extract yield was 1.03%. Benzylic-type isothiocyanates were the major degradation products of glucosinolates in the essential oil (95.0%); the CH₂Cl₂ extracts obtained from the aqueous solutions were characterised by alcohols and amines in both processes. This study has shown that during hydrodistillation, only 10% of the glucosinolate degradation products are recovered in the essential oil whereas 90% remain in the aqueous medium, being converted into alcohols and amines. The relative percentages of the different chemical classes recovered in our experimental conditions are discussed in relation with the glucosinolate composition in the raw material.     

Influence of different templates on the morphology of mesoporous aluminas

Mesoporous alumina has many environmental applications as catalysts support and adsorption or separation material. We studied the synthesis conditions for the mesoporous alumina formation from aluminum isopropoxide in the presence of anionic (lauric and stearic acid), cationic (cetyltrimethylammonium bromide, CTAB) and non-ionic (triblock poly(ethylene oxide)-poly(propylene oxide)-polyethyleneoxide, P123) templates. The X-ray diffraction data show that the alumina mesophases obtained at 550°C in the presence of fatty acids or P123 have amorphous walls, whereas the samples prepared at 500°C by using CTAB, in alkaline medium are crystalline with a γ-alumina structure. The solvothermal treatment caused the alumina mesophase with crystalline walls to be obtained at 550°C. The samples were investigated by nitrogen adsorption-desorption isotherms and scanning electron microscopy. The obtained alumina mesophases have specific surface areas in the range of 300–450 m² g⁻¹, narrow pore size distribution, and different morphology depending on the template used in the synthesis.