Microcionamides A and B, bioactive peptides from the philippine sponge Clathria (Thalysias) abietina

Microcionamides A (1) and B (2) have been isolated from the Philippine marine sponge Clathria (Thalysias) abietina. These new linear peptides are cyclized via a cystine moiety and have their C-terminus blocked by a 2-phenylethylenamine group. Their total structures, including absolute stereochemistry, were determined by a combination of spectral and chemical methods. Compound 1 was shown to slowly isomerize about the C-36/C-37 double bond when stored in DMSO. Microcionamides A (1) and B (2) exhibited significant cytotoxicity against the human breast tumor cells lines MCF-7 and SKBR-3 and displayed inhibitory activity against Mycobacterium tuberculosis H(37)Ra.     

α‐Tetraphosphorus Trichalcogenide Diamides and Imides containing both Sulfur and Selenium

Reaction of a mixture of bicyclic phosphorus sulfide selenide iodides α‐P₄S_nSe_3−nI₂ (n = 0–3) with PrⁱNH₂ and Et₃N gave corresponding diamides α‐P₄S_nSe_3−n(NHPrⁱ)₂ (n = 0–3) and imides α‐P₄S_nSe_3−n(μ‐NPrⁱ) (n = 2–3), identified in solution by ³¹P NMR. In one isomer of α‐P₄S₂Se(μ‐NPrⁱ), the C₂ symmetry of imides such as α‐P₄S₃(μ‐NPrⁱ) was broken, allowing relative assignment of ²J NMR couplings to the PNP bridge and the PSP bridge opposite to it. The coupling through the sulfur bridge was found to be reduced to ca. zero, in contrast to previous assumptions for this class of compounds. Ab initio models were calculated at the MPW1PW91/svp level for the sulfide selenide imides and for a selection of bond rotamers of the diamides, and at the MPW1PW91/LanL2DZ(d) level for the sulfide selenide diiodides. Different skeletal isomers were prevalent for the mixed chalcogenide diamides than for the diiodides, showing that exchange of chalcogen between skeletal positions took place in the amination reaction even at room temperature. Similar differences to those observed were predicted by the models, suggesting that equilibrium was attained.     

Ligand and base additive effects on the reversibility of nucleophilic addition in palladium-catalyzed allylic aminations monitored by nucleophile crossover

A nucleophile crossover experiment was used to monitor the reversibility of nucleophilic addition of benzylamine to π-allylpalladium complexes. Dppe, dppp, dppb, and PHOX showed more crossover than PPh₃ and dppm in both DMF and dichloromethane. Crossover was inhibited by the addition of DBU or Cs₂CO₃, but much less elimination to diene side products was observed with Cs₂CO₃. Analysis of percent crossover vs. percent reaction completion using the PHOX ligand revealed that with added DBU or Cs₂CO₃ crossover only began occurring after 100% completion had been reached.     

Halide and nitrite recognizing hexanuclear metallacycle copper(II) pyrazolates

Halide-centered hexanuclear, anionic copper(II) pyrazolate complexes [trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)X](-), X = Cl, Br, I are isolated in a good yield from the redox reaction of the trinuclear copper(I) pyrazolate complex [μ-Cu(3)((3,5-CF(3))(2)pz)(3)] with a halide source such as PPh(3)AuCl or [Bu(4)N]X, X = Cl, Br, or I, in air. X-ray structures of the anion-centered hexanuclear complexes show that the six copper atoms are bridged by bis(3,5-trifluoromethyl)pyrazolate and hydroxyl ligands above and below the six copper atom plane. The anions are located at the center of the cavity and weakly bound to the six copper atoms in a μ(6)-arrangement, Cu-X = ~3.1 ?. A nitrite-centered hexanuclear copper(II) pyrazolate complex [trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)(NO(2))](-) was obtained when a solution of [PPN]NO(2) in CH(3)CN was added dropwise to the trinuclear copper(I) pyrazolate complex [μ-Cu(3)((3,5-CF(3))(2)pz)(3)] dissolved in CH(3)CN, in air. Blue crystals are produced by slow evaporation of the acetonitrile solvent. The X-ray structure of [PPN][trans-Cu(6)((3,5-CF(3))(2)pz)(6)(OH)(6)(NO(2))] complex shows the nitrite anion sits in the hexanuclear cavity and is perpendicular to the copper plane with a O-N-O angle of 118.3(7)°. The (19)F and (1)H NMR of the pyrazolate ring atoms are sensitive to the anion present in the ring. Anion exchange of the NO(2)(-) by Cl(-) can be observed easily by (1)H NMR.     

Multiplexed inkjet functionalization of silicon photonic biosensors

The transformative potential of silicon photonics for chip-scale biosensing is limited primarily by the inability to selectively functionalize and exploit the extraordinary density of integrated optical devices on this platform. Silicon biosensors, such as the microring resonator, can be routinely fabricated to occupy a footprint of less than 50 × 50 μm; however, chemically addressing individual devices has proven to be a significant challenge due to their small size and alignment requirements. Herein, we describe a non-contact piezoelectric (inkjet) method for the rapid and efficient printing of bioactive proteins, glycoproteins and neoglycoconjugates onto a high-density silicon microring resonator biosensor array. This approach demonstrates the scalable fabrication of multiplexed silicon photonic biosensors for lab-on-a-chip applications, and is further applicable to the functionalization of any semiconductor-based biosensor chip.     

EEG topography-specific BOLD changes: a continuous EEG-fMRI study in a patient with focal epilepsy

Blood oxygenation level dependent (BOLD) response related to interictal activity was evaluated in a patient with post-traumatic focal epilepsy at repeated continuous electroencephalogram (EEG)-functional magnetic resonance imaging examinations. Lateralized interictal EEG activity induced a main cluster of activation co-localized with the anatomical lesion. Spreading of EEG interictal activity to both frontal lobes evoked bilateral clusters of activation indicating that topography of BOLD response might depend on the spatial distribution of epileptiform activity.     

Review of recent developments in OR/MS research in disaster operations management

Potential consequences of disasters involve overwhelming economic losses, large affected populations and serious environmental damages. Given these devastating effects, there is an increasing interest in developing measures in order to diminish the possible impact of disasters, which gave rise to the field of disaster operations management (DOM). In this paper we review recent OR/MS research in DOM. Our work is a continuation of a previous review from Altay and Green (2006). Our purpose is to evaluate how OR/MS research in DOM has evolved in the last years and to what extent the gaps identified by Altay and Green (2006) have been covered. Our findings show no drastic changes or developments in the field of OR/MS in DOM since the publication of Altay and Green (2006). Additionally to our comparative analysis, we present an original evaluation about the most common assumptions in recent OR/MS literature in DOM. Based on our findings we provide future research directions in order to make improvements in the areas where lack of research is detected.     

Rational Design and Development of Anisotropic and Mechanically Strong Gelatin‐Based Stress Relaxing Hydrogels for Osteogenic/Chondrogenic Differentiation

Rational design and development of tailorable simple synthesis process remains a centerpiece of investigational efforts toward engineering advanced hydrogels. In this study, a green and scalable synthesis approach is developed to formulate a set of gelatin‐based macroporous hybrid hydrogels. This approach consists of four sequential steps starting from liquid‐phase pre‐crosslinking/grafting, unidirectional freezing, freeze‐drying, and finally post‐curing process. The chemical crosslinking mainly involves between epoxy groups of functionalized polyethylene glycol and functional groups of gelatin both in liquid and solid state. Importantly, this approach allows to accommodate different polymers, chitosan or hydroxyethyl cellulose, under identical benign condition. Structural and mechanical anisotropy can be tuned by the selection of polymer constituents. Overall, all hydrogels show suitable structural stability, good swellability, high porosity and pore interconnectivity, and maintenance of mechanical integrity during 3‐week‐long hydrolytic degradation. Under compression, hydrogels exhibit robust mechanical properties with nonlinear elasticity and stress‐relaxation behavior and show no sign of mechanical failure under repeated compression at 50% deformation. Biological experiment with human bone marrow mesenchymal stromal cells (hMSCs) reveals that hydrogels are biocompatible, and their physicomechanical properties are suitable to support cells growth, and osteogenic/chondrogenic differentiation, demonstrating their potential application for bone and cartilage regenerative medicine toward clinically relevant endpoints.     

Three 4,7‐diaryl‐2‐ethylsulfanylpyrazolo[1,5‐a][1,3,5]triazines

The molecular dimensions of 2‐ethylsulfanyl‐7‐(4‐methylphenyl)‐4‐phenylpyrazolo[1,5‐a][1,3,5]triazine, C₂₀H₁₈N₄S, (I), 7‐(4‐chlorophenyl)‐2‐ethylsulfanyl‐4‐phenylpyrazolo[1,5‐a][1,3,5]triazine, C₁₉H₁₅ClN₄S, (II), and 4,7‐bis(4‐chlorophenyl)‐2‐(ethylsulfanyl)pyrazolo[1,5‐a][1,3,5]triazine, C₁₉H₁₄Cl₂N₄S, (III), show evidence for some aromatic delocalization in the pyrazole rings. The conformations adopted by the ethylsulfanyl substituents are different in all three compounds. There are no hydrogen bonds in any of the crystal structures, but pairs of molecules in (II) and (III) are linked into centrosymmetric dimers by π‐stacking interactions.