Fe离子注入ZnO生成超顺磁纳米颗粒

过渡族元素掺杂ZnO生成稀磁半导体, 成为近期国际材料科学研究的热点. 在本文中, 研究Fe离子注入ZnO单晶的结构和磁性变化, 目标是建立磁性和结构的对应关系, 澄清铁磁性的来源. 采用卢瑟福背散射/沟道技术 (RBS/Channelling)、同步辐射X射线衍射 (SR-XRD)和超导量子干涉仪 (SQUID), 研究注入温度和退火对样品的晶格损伤、结构及磁性的影响. 研究表明: 样品注入区损伤随注入温度升高而降低; 低温253 K注入样品中, SR-XRD未检测到新相, Fe离子分布于Zn位, ZnO (0002) 峰右侧肩峰可能属于Zn_1-xFe_xO, 5 K下测试样品不具有铁磁性; 623 K注入和823 K真空退火 (253 K注入) 样品中形成α和γ相金属Fe, 5 K下样品具有明显的剩磁和矫顽力, 零场冷却和场冷却 (ZFC/FC) 曲线和300 K下的磁滞回线显示纳米Fe颗粒具有超顺磁性. Fe离子注入ZnO的磁性源于第二相α-Fe和γ-Fe. 关键词： 离子注入 ZnO 同步辐射X射线衍射 超顺磁性     

Generation of 520 mW pulsed blue light by frequency doubling of an all-fiberized 978 nm Yb-doped fiber laser source

Pulsed blue light at 489 nm has been generated by second-harmonic-generation of a nanosecond pulsed master-oscillator power amplifier system based on a short Yb(3+) doped single-mode fiber amplifier at 978 nm and an external-cavity diode laser as seed source. The Yb(3+)-doped fiber was core-pumped by a W type Nd(3+) doped double-clad fiber laser operating on the transition near 930 nm ((4)F(3/2)→(4)I(9/2)). 520 mW of average power was generated at 489 nm using a periodically poled MgO:LiNbO(3), corresponding to a conversion efficiency of 34%.     

Realization of single-mode telluride rib waveguides for mid-IR applications between 10 and 20 μm

The feasibility of all-telluride integrated optics devices based on waveguides presenting a single-mode behavior in the spectral range (10-20 μm) is demonstrated. These waveguides are constituted of a several micrometer thick Te(82)Ge(18) film deposited onto a Te(75)Ge(15)Ga(10) bulk glass substrate by thermal coevaporation and further etched by reactive ion etching under the CHF(3)/O(2)/Ar atmosphere. The obtained structures were proven to behave as channel waveguides with a good single-mode transmission over the whole spectral range. These results allowed validating our technological solution for the fabrication of integrated optics modal filters for spatial interferometry.     

Interval Methods for Model Qualification: Methodology and Advanced Application

An actual model in simulation (e.g. in chemistry) or control (e.g. in robotics) is often too complex to use, and sometimes impossible to obtain. To handle a system in practice, a simplification of the real model is often necessary. This simplification goes through some hypotheses made on the system or the modeling approach. These hypotheses are rarely verified whereas they could lead to an inadmissible model, over approximated for its use. In this paper, we propose a method that qualifies the simplification validity for all models that can be expressed by real-valued variables involved in closed-form relations and depending on parameters. We based our approach on a verification of a quality threshold on the hypothesis relevance. This method, based on interval analysis, checks the acceptance of the hypothesis in a full range of the whole model space, and gives bounds on the quality threshold and on the model parameters. Our approach is experimentally validated on a robotic application.     

Crystallization of zinc lactate in presence of malic acid

The influence of malic acid, which acts as an impurity on the cooling crystallization of zinc lactate is investigated in this paper by monitoring the relative supersaturation and the number of crystals during crystallization. The presence of malic acid increases the solution solubility and makes the metastable zone wider; it also changes the habit of the crystal. The purity of the final products is shown to be influenced by the amount and size of seed crystals, cooling rate, seeding temperature and final temperature, but appears to depend mainly on the particle size and level of supersaturation. Residual supersaturation thresholds are observed that depend on the final temperature. A model is proposed to predict the steady-state supersaturation value from the final temperature at a given impurity concentration. This model is based on Kubota and Gibbs equations.     

Structural characterization of poly(amino)ester dendrimers and related impurities by electrospray tandem mass spectrometry

An acid‐terminated poly(amino)ester dendrimer was studied by electrospray ionization tandem mass spectrometry to establish its fragmentation pathways, with the aim of using them to investigate the structure of any defective molecules generated during the dendrimer synthesis. This poly(amino)ester dendrimer could be ionized in both polarities but the most structurally relevant dissociation pathways were found from the deprotonated molecule in negative ion mode. The dissociation pattern of this dendrimer is fully described and supported by accurate mass measurements. The main dissociation reactions of the negatively charged polyacidic dendrimer were shown to consist of (i) the release of carbon dioxide and ethene within a branch, which proceeds as many times as intact neutral branches are available; and (ii) the elimination of an entire dendrimer arm. Monitoring the occurrence of these reactions together with any deviation from these two main routes allowed six major dendritic impurities to be structurally characterized. Copyright © 2010 John Wiley & Sons, Ltd.     

3D measurement of micromechanical devices vibration mode shapes with a stroboscopic interferometric microscope

Microscopic interferometry is a powerful technique for the static and dynamic characterization of micromechanical devices. In this paper we emphasize its capabilities for 3D vibration mode shapes profiling of Al cantilever microbeams and Cr micromachined membranes. It is demonstrated that time-resolved measurements up to 800 kHz can be performed with a lateral resolution in the micrometer range and a vibration amplitude detection limit of 3–5 nm. In addition, with reduced image sizes (256×256), quasi-real time (150–500 ms) visualization of the vibration mode 3D profiles becomes possible. These performances were obtained by using stroboscopic illumination with an array of superluminescent LED and an optimized automatic fast Fourier transform phase demodulation of the interferograms. The results are compared with theoretical shapes of the vibration modes and with point measurements of the vibration spectra.     

Quantitative analysis of 3‐OHB[a]P and (+)‐anti‐BPDE as biomarkers of B[a]P exposure in rats

The aim of this study was to develop an analytical method for the determination the levels of metabolites of benzo[a]pyrene (B[a]P), 3‐hydroxybenzo(a)pyrene (3‐OHB[a]P) and (+)‐anti‐benzo(a)pyrene diol‐epoxide [(+)‐anti‐BPDE, combined with DNA to form adducts], in rat blood and tissues exposed to B[a]P exposure by high‐performance liquid chromatography with fluorescence detection (HPLC/FD), and to investigate the usefulness of 3‐OHB[a]P and (+)‐anti‐BPDE as markers of intragastrical exposure to B[a]P in rats. The levels of 3‐OH‐B[a]P and B[a]P‐tetrol I‐1 released after acid hydrolysis of (+)‐anti‐BPDE in the samples were measured by HPLC/FD. The calibration curves were linear (r² > 0.9904), and the lower limit of quantification ranged from 0.34 to 0.45 ng/mL for 3‐OHB[a]P and from 0.43 to 0.58 ng/mL for (+)‐anti‐BPDE. The intra‐ and inter‐day stability assay data suggested that the method is accurate and precise. The recoveries of 3‐OHB[a]P and (+)‐anti‐BPDE were in the ranges of 73.6 ± 5.0 to 116.5 ± 6.3% and 73.3 ± 8.5 to 141.2 ± 13.8%, respectively. A positive correlation was found between the concentration of intragastrical B[a]P and the concentrations of 3‐OH‐B[a]P and (+)‐anti‐BPDE in the blood and in most of the tissues studied, except for the brain and kidney, which showed no correlation between B[a]P and 3‐OHB[a]P and between B[a]P and (+)‐anti‐BPDE, respectively. A sensitive, reliable and rapid HPLC/FD was developed and validated for analysis of 3‐OHB[a]P and (+)‐anti‐BPDE in rat blood and tissues. There was a positive correlation between the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the blood and the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the most other tissues examined. The concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the blood could be used as an indicator of the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the other tissues in response to B[a]P exposure. These results demonstrate that 3‐OHB[a]P and (+)‐anti‐BPDE are potential biomarkers of B[a]P exposure, which would also be useful to assess the carcinogenic risks from B[a]P exposure. Copyright © 2015 John Wiley & Sons, Ltd.