Development of a method based on on-line reversed phase liquid chromatography and gas chromatography coupled by means of an adsorption–desorption interface for the analysis of selected chiral volatile compounds in methyl jasmonate treated strawberries

A method based on the use of the through oven transfer adsorption–desorption (TOTAD) interface in on-line coupling between reversed phase liquid chromatography and gas chromatography (RPLC–GC) for the determination of chiral volatile compounds was developed. In particular, the method was applied to the study of the influence of methyl jasmonate (MJ) treatment on the production and enantiomeric composition of selected aroma compounds in strawberry. The compounds studied were ethyl 2-methylbutanoate, linalool and 4-hydroxy-2,5-dimethyl-3(2H)-furanone (i.e. furaneol), which were examined on days 3, 6 and 9 after treatment. The method developed resulted in relative standard deviations (RSDs) of 21.6%, 8.1% and 9.8% and limits of detection (LD) of 0.04, 0.07 and 0.02 mg/l for ethyl 2-methylbutanoate, linalool and furaneol, respectively. The application of the RPLC–TOTAD–GC method allowed higher levels of ethyl 2-methylbutanoate, linalool and furaneol to be detected, particularly after 9 days of treatment. Besides, MJ demonstrated to affect the enantiomeric distribution of ethyl 2-methylbutanoate. On the contrary, the enantiomeric composition of linalool and furaneol kept constant in both control and MJ-treated strawberries throughout the study. These results are discussed.     

Partially coherent optical processor for enhancement of partial second order derivatives of an image: Analysis and implementation

We present an optical processor capable to perform partial second derivatives of an image working with partially coherent illumination. The proposed system utilizes a liquid crystal display, onto which images to be derived are displayed. The method is based on the capacity of these devices to generate simultaneously a contrast reverted replica of the image displayed on it. A positive replica of original image is obtained when the LCD is between crossed polarizers, while the negative one is obtained with the LCD is between parallel polarizers. Since the LCD is a diffraction element, both polarizer arrangements may be simultaneously implemented, for example, in a 4f optical processor using polarization filtering of the different diffraction orders. When three images (two replicas of original image displaced in opposite direction and the other one with contrast reverted and centered at the origin.) are imagined across a slightly defocused plane, one obtains an image with enhanced second derivatives in a given direction. No other incoherent (or partially coherent) optical system is presently known which can perform partial second-order derivatives of an image. Experimental results obtained are presented.     

A fractional order epidemic model for the simulation of outbreaks of influenza A(H1N1)

In this paper, we propose a nonlinear fractional order model in order to explain and understand the outbreaks of influenza A(H1N1). In the fractional model, the next state depends not only upon its current state but also upon all of its historical states. Thus, the fractional model is more general than the classical epidemic models. In order to deal with the fractional derivatives of the model, we rely on the Caputo operator and on the Grünwald–Letnikov method to numerically approximate the fractional derivatives. We conclude that the nonlinear fractional order epidemic model is well suited to provide numerical results that agree very well with real data of influenza A(H1N1) at the level population. In addition, the proposed model can provide useful information for the understanding, prediction, and control of the transmission of different epidemics worldwide. Copyright © 2013 John Wiley & Sons, Ltd.     

Facilitated modelling in operational research

The traditional way of employing operational research in organisational interventions has been the expert mode. In this mode, the problem situation faced by the client is given to the operational research consultant, who then builds a model of the situation, solves the model to arrive at an optimal (or quasi-optimal) solution, and then provides a recommendation to the client based on the obtained solution. An alternative mode of engagement is to conduct the whole intervention together with the client: from structuring and defining the nature of the problem situation of interest, to supporting the evaluation of priorities and development of plans for subsequent implementation. In this latter mode, the operational researcher works throughout the intervention not only as an analyst, but also as a facilitator to the client. This paper discusses this latter mode of engagement with clients, with particular emphasis on the use of facilitated modelling as the intervention tool. Drawing on research scattered across a range of publications and domains, the review presented here provides a formal definition of facilitated modelling, together with a general framework that allows the conceptualisation of a wide variety of facilitated modelling approaches to organisational intervention. Design issues in facilitated modelling and their practical implication are discussed, and directions for future research identified.     

Activating Bi p-orbitals in Dispersed Clusters of Amorphous BiOx for Electrocatalytic Nitrogen Reduction

Catalytic strategies based on main group metals are significantly less advanced than those of transition metal catalysis, leaving untapped areas of potentially fruitful research. We here demonstrate an effective approach for the modulation of Bi 6p energy levels during the construction of atomically dispersed clusters of amorphous BiO_x. Bi oxidation state is proposed to strongly affects the nitrogen fixation activity, with the half-occupied p_z orbitals of the Bi²⁺ ions being highly efficient toward electron injection into the inert N₂ molecule. With sufficient catalytic sites to adsorb and activate N₂, the bonding between N₂ and catalyst is able to be in situ identified. The catalyst shows an outstanding Faraday efficiency (≈30 %) and high yield (≈113 μg h⁻¹ mg⁻¹_cat) in NH₃ production, outperforming most of the existing catalysts in aqueous solution. These results lay the basis for developing the potential of p-block elements for catalysis of multi-electron reactions.     

On the Nitroxide Quasi‐Equilibrium in the Alkoxyamine‐Mediated Radical Polymerization of Styrene

Summary: The range of validity of two popular versions of the nitroxide quasi‐equilibrium (NQE) approximation used in the theory of kinetics of alkoxyamine mediated styrene polymerization, are systematically tested by simulation comparing the approximate and exact solutions of the equations describing the system. The validity of the different versions of the NQE approximation is analyzed in terms of the relative magnitude of (dN/dt)/(dP/dt). The approximation with a rigorous NQE, k_c[P][N] = k_d[P N], where P, N and P N are living, nitroxide radicals and dormant species respectively, with kinetic constants k_c and k_d, is found valid only for small values of the equilibrium constant K (10⁻¹¹–10⁻¹² mol · L⁻¹) and its validity is found to depend strongly of the value of K. On the other hand, the relaxed NQE approximation of Fischer and Fukuda, k_c[P][N] = k_d[P N]₀ was found to be remarkably good up to values of K around 10⁻⁸ mol · L⁻¹. This upper bound is numerically found to be 2–3 orders of magnitude smaller than the theoretical one given by Fischer. The relaxed NQE is a better one due to the fact that it never completely neglects dN/dt. It is found that the difference between these approximations lies essentially in the number of significant figures taken for the approximation; still this subtle difference results in dramatic changes in the predicted course of the reaction. Some results confirm previous findings, but a deeper understanding of the physico‐chemical phenomena and their mathematical representation and another viewpoint of the theory is offered. Additionally, experiments and simulations indicate that polymerization rate data alone are not reliable to estimate the value of K, as recently suggested.

Validity of the rigorous nitroxide quasi‐equilibrium assumption as a function of the nitroxide equilibrium constant.     

In situ microbial fuel cell-based biosensor for organic carbon

The biological oxygen demand (BOD) may be the most used test to assess the amount of pollutant organic matter in water; however, it is time and labor consuming, and is done ex-situ. A BOD biosensor based on the microbial fuel cell principle was tested for online and in situ monitoring of biodegradable organic content of domestic wastewater. A stable current density of 282±23mA/m(2) was obtained with domestic wastewater containing a BOD(5) of 317±15mg O(2)/L at 22±2°C, 1.53±0.04mS/cm and pH 6.9±0.1. The current density showed a linear relationship with BOD(5) concentration ranging from 17±0.5mg O(2)/L to 78±7.6mg O(2)/L. The current generation from the BOD biosensor was dependent on the measurement conditions such as temperature, conductivity, and pH. Thus, a correction factor should be applied to measurements done under different environmental conditions from the ones used in the calibration. These results provide useful information for the development of a biosensor for real-time in situ monitoring of wastewater quality.     

Electrocatalysis of oxygen reduction on glassy carbon electrodes modified with anthraquinone moieties

Anthraquinone groups were electrochemically grafted to glassy carbon (GC) electrodes via methylene linker to study the oxygen reduction reaction (ORR) in alkaline medium. Two different anthraquinone derivatives, 2-bromomethyl-anthraquinone or 2-chloromethyl-anthraquinone, were used to modify the GC electrode surface. Several modification conditions encompassing potential cycling and electrolysis at a fixed potential were employed in order to vary the surface concentration of MAQ groups (Γ _MAQ) and to study the dependence of the O₂ reduction behaviour on electrografting procedure. Cyclic voltammetry confirmed the presence of anthraquinone moieties attached to the GC electrode and Γ _MAQ varied in the range of (0.5–2.4)?×?10^?10 mol cm^?2. Oxygen reduction was studied on MAQ-modified GC electrodes of various surface coverage using the rotating disc electrode (RDE) and rotating ring-disc electrode (RRDE) methods. The RDE and RRDE results of O₂ reduction reveal that GC/MAQ electrodes show rather similar electrocatalytic behaviour towards the ORR yielding hydrogen peroxide as the final product.     

Mixtures of maximally entangled pure states

We study the conditions when mixtures of maximally entangled pure states remain entangled. We found that the resulting mixed state remains entangled when the number of entangled pure states to be mixed is less than or equal to the dimension of the pure states. For the latter case of mixing a number of pure states equal to their dimension, we found that the mixed state is entangled provided that the entangled pure states to be mixed are not equally weighted. We also found that one can restrict the set of pure states that one can mix from in order to ensure that the resulting mixed state is genuinely entangled. Also, we demonstrate how these results could be applied as a way to detect entanglement in mixtures of the entangled pure states with noise.     

Energy contribution of heterocyclic sulfur and a disulfide bond in solid and gaseous phase

Structural Chemistry - In the present work, the energy contribution of the sulfur atom in a heterocycle and in a disulfide bond in solid and gas phases was calculated. To achieve this goal,...