Synthesis and characterization of a family of layered trichalcogenides for assisted hydrogen photogeneration

Three layered trisulfides (TiS₃, ZrS₃, HfS₃) have been synthesized by solid–gas reaction between metal and sulfur in a vacuum sealed ampoule at 550 °C during 60 h. The samples used in this work were prepared from a colloidal suspension of powder of each one of the metal trisulfides (MS₃, M = Ti, Zr, Hf) in ethanol and deposited on titanium disks and quartz substrates by ”drop coating” technique. These samples have been characterized by X‐ray diffraction, energy dispersive analysis of X‐ray and scanning electron microscopy. The obtained direct optical band gaps are 1.0 ± 0.1 eV, 2.0 ± 0.1 eV and 2.2 ± 0.1 eV for TiS₃, ZrS₃ and HfS₃, respectively. Photoelectrochemical measurements in 0.5 M Na₂SO₃ have been carried out to characterize the MS₃/electrolyte interface. The flat‐band potentials (V_fb) vs. Ag/AgCl measured by electrochemical impedance spectroscopy (EIS) are –0.84 ± 0.02 V (TiS₃), –0.93 ± 0.02 V (ZrS₃) and –0.92 ± 0.02 V (HfS₃). Hydrogen generation was investigated in a photoelectrochemical cell (PEC) with MS₃ as photoanodes under white light illumination of 200 ± 20 mW/cm² at external bias potentials of 0.3 V vs. Ag/AgCl. Hydrogen evolution flows have been quantified by quadrupole mass spectrometry (QMS) reaching instantaneous values up to 19 ± 2 nmol H₂/min cm² with TiS₃ as photoanode.     

Combination of radon and stable isotope analysis as a tool for decision support concerning the remediation of NAPL-contaminated sites

The non-aqueous phase-liquid (NAPL)-contaminated aquifer at a major refinery site in Mexico was investigated. Owing to the depth of the contaminated aquifer section (NAPL source zone) of over 100 m below the surface, the actual aquifer material was not accessible for sampling. Information on the residual NAPL contamination of the aquifer could only be obtained indirectly by analysing groundwater samples from a few wells available at the site. To tackle the problem, an approach alternative to conventional groundwater analysis for dissolved NAPL was chosen. For evaluating the recent contamination and estimating its probable future development, the radioisotope radon-222 and the stable isotopes 13C, 34S and 18O were used as naturally occurring contamination tracers and process indicators. Radon was used as partitioning tracer for the approximate localization and semi-quantitative assessment of the NAPL source zone. The stable isotopes were used as indicators for naturally occurring biodegradation processes, which might potentially be implemented into future remediation schemes.     

Electrocatalysis of oxygen reduction on glassy carbon electrodes modified with anthraquinone moieties

Anthraquinone groups were electrochemically grafted to glassy carbon (GC) electrodes via methylene linker to study the oxygen reduction reaction (ORR) in alkaline medium. Two different anthraquinone derivatives, 2-bromomethyl-anthraquinone or 2-chloromethyl-anthraquinone, were used to modify the GC electrode surface. Several modification conditions encompassing potential cycling and electrolysis at a fixed potential were employed in order to vary the surface concentration of MAQ groups (Γ _MAQ) and to study the dependence of the O₂ reduction behaviour on electrografting procedure. Cyclic voltammetry confirmed the presence of anthraquinone moieties attached to the GC electrode and Γ _MAQ varied in the range of (0.5–2.4)?×?10^?10 mol cm^?2. Oxygen reduction was studied on MAQ-modified GC electrodes of various surface coverage using the rotating disc electrode (RDE) and rotating ring-disc electrode (RRDE) methods. The RDE and RRDE results of O₂ reduction reveal that GC/MAQ electrodes show rather similar electrocatalytic behaviour towards the ORR yielding hydrogen peroxide as the final product.     

Highly Stable Water‐Soluble Platinum Nanoparticles Stabilized by Hydrophilic N‐Heterocyclic Carbenes

Controlling the synthesis of stable metal nanoparticles in water is a current challenge in nanochemistry. The strategy presented herein uses sulfonated N‐heterocyclic carbene (NHC) ligands to stabilize platinum nanoparticles (PtNPs) in water, under air, for an indefinite time period. The particles were prepared by thermal decomposition of a preformed molecular Pt complex containing the NHC ligand and were then purified by dialysis and characterized by TEM, high‐resolution TEM, and spectroscopic techniques. Solid‐state NMR studies showed coordination of the carbene ligands to the nanoparticle surface and allowed the determination of a ¹³C–¹⁹⁵Pt coupling constant for the first time in a nanosystem (940 Hz). Additionally, in one case a novel structure was formed in which platinum(II) NHC complexes form a second coordination sphere around the nanoparticle.     

Characterization of the raw essential oil eugenol extracted from <Emphasis Type="Italic">Syzygium</Emphasis> <Emphasis Type="Italic">aromaticum</Emphasis> L.

Eugenol is the main volatile compound extracted oil from clove bud, Syzygium aromaticum L., and used in traditional medicine, as a bactericide, fungicide, anesthetic, and others. Its extraction was performed using hydrodistillation which is the most common extraction technique. Its components and thermal behavior were evaluated using gas chromatography (GC) and differential scanning calorimetry (DSC), which provide a better characterization of these natural compounds. This extracted product was compared to the standard eugenol results. The GC results suggested ~90% eugenol was found in the total extracted oil, and some of its boiling characteristics were 270.1 °C for peak temperature and 244.1 J g⁻¹ for the enthalpy variation. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Green Synthesis of Gold and Silver Nanoparticles Using Leaf Extract of Capsicum chinense Plant

So far, several studies have focused on the synthesis of metallic nanoparticles making use of extracts from the fruit of the plants from the genus Capsicum. However, as the fruit is the edible, and highly commercial, part of the plant, in this work we focused on the leaves, a part of the plant that is considered agro-industrial waste. The biological synthesis of gold (AuNPs) and silver (AgNPs) nanoparticles using aqueous extracts of root, stem and leaf of Capsicum chinense was evaluated, obtaining the best results with the leaf extract. Gold and silver nanoparticles synthesized using leaf extract (AuNPs-leaf and AgNPs-leaf, respectively) were characterized by UV-visible spectrophotometry (UV-Vis), Fourier Transform Infrared Spectroscopy with Attenuated Total Reflection (FTIR-ATR), X-ray Photoelectron Spectroscopy (XPS), Ultra Hight Resolution Scanning Electron Microscopy coupled to Energy-Dispersive X-ray spectroscopy (UHR-SEM-EDX) and Transmission Electron Microscopy (TEM), and tested for their antioxidant and antimicrobial activities. In addition, different metabolites involved in the synthesis of nanoparticles were analyzed. We found that by the use of extracts derived from the leaf, we could generate stable and easy to synthesize AuNPs and AgNPs. The AuNPs-leaf were synthesized using microwave radiation, while the AgNPs-leaf were synthesized using UV light radiation. The antioxidant activity of the extract, determined by ABTS, showed a decrease of 44.7% and 60.7% after the synthesis of the AuNPs-leaf and AgNPs-leaf, respectively. After the AgNPs-leaf synthesis, the concentration of polyphenols, reducing sugars and amino acids decreased by 15.4%, 38.7% and 46.8% in the leaf extract, respectively, while after the AuNPs-leaf synthesis only reducing sugars decreased by 67.7%. These results suggest that these groups of molecules are implicated in the reduction/stabilization of the nanoparticles. Although the contribution of these compounds in the synthesis of the AuNPs-leaf and the AgNPs-leaf was different. Finally, the AgNPs-leaf inhibited the growth of S. aureus, E. coli, S. marcescens and E. faecalis. All of them are bacterial strains of clinical importance due to their fast antibiotic resistance development.     

Environmentally friendly sonocatalysis promoted preparation of 1-thiocarbamoyl-3,5-diaryl-4,5-dihydro-1H-pyrazoles

An efficient and green synthesis of thiocarbamoyl-3,5-diaryl-4,5-dihydro-1H-pyrazoles via the condensation of chalcones with thiosemicarbazide in ethanol and KOH under ultrasound irradiation is reported. The products were isolated in good yields after short reaction times.