Covalent chemistry and conformational dynamics of topologically chiral amide-based molecular knots

The readily available in gram quantities tris(allyloxy)knot of the amide-type 5 (knotane) can be completely and partially deprotected with nBu(3)SnH in the presence of a palladium catalyst resulting in hydroxyknotanes 7-9. These, in turn, react with diethylchlorophosphate giving rise to knotanes equipped with between one and three phosphoryl groups. Sulfonylation of bis(allyloxy)monohydroxyknotane 8 with p-toluenesulfonyl chloride and, following removal of one or two allyl groups from the intermediate monosulfonate 13, give rise to sulfonyloxy-allyloxy-hydroxy- and sulfonyloxy-dihydroxy-knotanes 15 and 14, respectively. This provides a convenient method for the preparation of knotanes with any substitution pattern. All new knotanes have been isolated in preparative amounts and as highly pure substances with an exception of allyloxy-dihydroxyknotane 9. This compound could only be obtained as a mixture with the corresponding monohydroxy-derivative 8. The structures of all synthesized compounds were established by means of FAB and MALDI TOF mass spectrometry, (1)H and (31)P NMR spectroscopy. The triphosphorylated knotane 10 exhibits high solubility in alcohols, allowing its complete enantiomeric resolution with a commercially available chiral HPLC column. (1)H,(1)H DQF-COSY correlation spectroscopy along with H/D exchange experiments and ab initio calculations provided the first detailed (1)H NMR signal assignments of knotanes in [D(6)]DMSO solution. The combination of variable temperature (1)H and (31)P NMR spectroscopy and molecular modeling has been applied to study the conformational behavior of the new knotanes in different solvents. It has been shown that in DMSO solution at room temperature knotanes exist in a relatively rigid nonsymmetrical conformation similar to that found in the solid state while faster conformational exchange leading to the average D(3) symmetrical structure was detected in a number of other solvents.     

α,ω-Diisocyanatocarbodiimides, -Polycarbodiimides,and Their Derivatives

Research in the field of low-molecular weight, oligomeric and polymeric α,ω-diisocyanatocarbodiimides and -polycarbodiimides has been fruitful, not only in connection with these compounds themselves, but also—as so often happens in chemistry—with quite different problems. Novel synthetic methods, discoveries concerning the properties of low-molecular weight carbodiimides and phosphane imide derivatives, as well as results on the fragmentation reactions of four-membered heterocyclic compounds containing oxygen, phosphorus, and nitrogen, and a better understanding of the diisocyanate polyaddition process are among the many by-products of this research. The “high- and low-temperature formation” of polycarbodiimides and the homogeneous and heterogeneous catalysis of this process are described, and the fundamental importance of four-membered ring fragmentation mechanisms resulting in the formation of phosphane imide derivatives is outlined. Interesting building blocks for the diisocyanate polyaddition and polycondensation processes can be synthesized by many derivatization reactions of oligomeric and high-molecular weight polycarbodiimides and polyuretonimines. The in situ production of polycarbodiimides via matrix reactions in flexible polyurethane foams leads to a cellular arrangement of the material due to the pronounced symmetrical growth processes. Combination-foams with increased carbonation tendencies are formed in this way. Attention is drawn to several industrial applications of α,ω-diisocyanatopolycarbodiimides, of high-molecular weight cross-linked polyuretonimines, and of polycarbodiimide foams.     

Preparation,Characterisation, and Structure of N-Methylated Derivatives of 1,3,5-Triamino-1,3,5-trideoxy-cis-inositol: Polyalcohols with Unusual Acidity

1,3,5-Trideoxy-1,3,5-tris(dimethylamino)-cis-inositol (TDCI) and 1,3,5-trideoxy-1,3,5-tris(trimethylammonio)-cis-inositol (TTCI) were prepared by methylation of 1,3,5-triamino-1,3,5-trideoxy-cis-inositol (TACI). The ability of TDCI to form both intermolecular and intramolecular H-bonds, as demonstrated by X-ray diffraction, is probably responsible for the good solubility of TDCI in almost every common solvent. TTCI was found to be a polyol of unusual high acidity (pK₁ = 8.14 ± 0.02, pK₂ = 13.0 ± 0.2). This phenomenon could be explained by electrostatic interactions between the charged substituents of the cyclohexane residue.     

Stoffwechselprodukte von Mikroorganismen. 177. Mitteilung. Avilamycin C

From cultures of the Avilamycin (Avilamycin A) producing organism, Streptomyces viridochromogenes, strain ETH 23575, a second antibiotic, Avilamycin C, C₆₁H₉₀Cl₂O₃₂ could be isolated in crystalline form. Both Avilamycins belong to the group of the Orthosomycins. By IR., ¹H- and ¹³C-NMR. spectroscopy and by transformation to a common derivative it could be proven that Avilamycin A is a methyl ketone, Avilamycin C the corresponding methyl carbinol.     

Pharmacologically interesting compounds—I: High resolution mass spectra of phenothiazines

The mass spectra of twenty-six commercially available medicinal phenothiazines have been determined at high resolution. In each compound, the side chain attached to the 10-position of the phenothiazine ring contains nitrogen and fission of the C? C bond α to this nitrogen gives in most cases the base peak. Some of the compounds are also substituted at the 2-position and this substituent generally remains intact, though some substituents such as acetyl, propionyl, methoxyl and methylthio can undergo fragmentation. Fragmentations fall into three groups; those which give ions representing a part of the side chain; those which give ions representing the intact phenothiazine ring with part of the side chain attached; those which give ions representing a partially fragmented ring system.     

Ion exchange in dimethylsulfoxide media. I

Summary Distribution ratios between Dowex 50 W-X 8 resin and DMSO-H₂O-HCl systems have been determined for Mg, Ca, Sr, Ba, Ga, In, Sn(II) and Pb(II) as a function of both DMSO content and HCl-molarity. At high DMSO concentrations and high HCl concentrations theD values for all metal ions were not much different from those in corresponding aqueous systems. However, at lower and intermediate HCl concentrations (0.10 to 0.60M) D values differed greatly from those in aqueous systems, especially in the range from 20 to 50 mole% DMSO. Maxima in the logD vs. mole% DMSO plots at constant HCl concentrations were obtained for all cations except Sn(II) and Pb(II). Separation procedures for various pairs and combinations of cations seem feasible in DMSO-media [e. g., Ga/In and Sn(II)/Pb(II)] and the DMSO-water system is suggested as a very promising novel solvent medium for ion exchange separations.

---

Zusammenfassung Für Mg, Ca, Sr, Ba, Ga, In, Sn(II) und Pb(II) wurden die Verteilungsverhältnisse zwischen Dowex 50 W-X 8 und Dimethylsulfoxid—Wasser—Salzsäure in Abhängigkeit vom DMSO-Gehalt und der Salzsäuremolarität bestimmt. Bei hohen DMSO-Konzentrationen und hohen HCl-Konzentrationen unterscheiden sich die Verteilungskoeffizienten (D) aller Metallionen nicht sehr von denen in entsprechenden wäßrigen Systemen. Aber bei niederen und mäßigen HCl-Konzentrationen (0,10-bis 0,60-m) istD sehr verschieden gegenüber wäßrigen Systemen, besonders bei Anwesenheit von 20 bis 50 Mol-% DMSO. Trägt man logD gegen Mol-% DMSO bei konstanter HCl-Konzentration auf, so erhält man für alle Metalle außer Sn(II) und Pb(II) Maxima. Trennungsverfahren für verschiedene Ionenpaare und -gemische scheinen in DMSO-hältigem Plasma durchführbar zu sein, z. B. Ga/In und Sn(II)/Pb(II). Wäßrige DMSO-Systeme sind neue, vielversprechende Lösungsmittel für Trennungen mit Hilfe von Ionenaustauschern.

     

Stereochimie de l'hydrogenation des (±) Δ3(3a)-hydrindenones-4. Comparaison avec le cas de la (+) methyl-3 Δ3(3a)-hydrindenone-4 et de ses dioxolannes

We show that the four studied 4-hydrindenones (with or without a methyl substituant at C3 or C7a) give by hydrogenation on Raney nickel or on Pd/C, in various solvants, the cis 4-hydrindanones, by a kinetically controlled process. During the hydrogenation, the double bond can migrate only in the positions conjugated to the carbonyl group.In contrast, when the carbonyle is protected as a dioxolanne, the double bond is free to migrate around the five membered ring. In spite of this mobility the optical purity of the saturated dioxolannes formed is high. In the case of the (+)3-methyl Δ^3(3a) 4-hydrindenone, the enantiomeric hydrindanones $\text{9a}$ obtained by direct hydrogenation or with isomerization of the double bond are not the same. Therefore, the optical purity of the product is low, but its value allows an estimation of the relative importance of the two reaction pathways.     

Ion pair generation rates near planar3H and63Ni electron capture detector foils

The ion-pair generation rate (ionization topography) in plasmas from⁶³Ni and particularly Ti³H₄ foils, as used in electron capture detectors, was measured at room temperature using large, parallel plates of low backscattering ability in nitrogen gas of varying density. For one atmosphere pressure, the fall-off of ion pair formation as calculated from the exponential region equalsN ₀·e ^–0.19d for⁶³Ni andN ₀·e ^–1.4d for³H (whereN ₀ is the initial ionization rate immediately adjacent to the foil andd is the distance from the foil in mm). The experimentally measured half ranges (distances from the foil within which 50% of all possible ion pairs are created) are 2.7 mm for⁶³Ni and 0.27 mm for³H. The half ranges calculated from the exponential region where there is less interference from electron backscattering, are 3.7 and 0.5 mm, respectively. The latter values are considered closer to the true, unimpeded ionization topography near planar⁶³Ni and³H foils.Material taken from doctoral thesis     

Détermination de l'énergie de conjugaison des acides naphtoǐques

The present paper deals with the experimental and theoretical determination of energies of conjugation of organic molecules.A computation process has been applied, first to simple molecules comprising an hydrocarbon (styrene), an oxygen function (benzaldehyde) and a nitrogen function (aniline). The results are compared with those obtained from the literature.The application of this computation process to naphthoic acids permits the determination of energies of conjugation and isomerization of these molecules.