Reaction of mercury(II) and xylenol orange-I Effect of the buffering media

The influence of the buffering medium on the reaction of Hg(II) with Xylenol Orange has been studied. Amine-type compounds are complexed by Hg(II)/Xylenol Orange with a sharp hyperchromic effect on the reagent itself, at 590 nm, but complex formation of Hg(II)/Xylenol Orange in non-amine-type buffer, such as citric acid-phosphate, gives a hypochromic effect on Xylenol Orange at 580 nm. Hg(II) is determined at pH 7.5 in two ranges of concentration, 2-9 ppm in citrate buffer, measured at 580 nm ( = 2.50 x 10(4)), and 6-11 ppm in hexamine buffer, at 590 nm ( = 4.18 x 10(4)).     

Neue stellungsisomere reineckesalzähnliche Verbindungen mit Toluidinen

Zusammenfassung Es wurden eine Reihe von Substitutionsreaktionen mit entwässertem K₃[Cr(NCS)₆] und aromatischen Aminen, ohne Verwendung von Lösungsmitteln, durchgeführt. Es wurde beobachtet, da die sehr schwachen Basen mit p_K-Werten 14–16, wie die isomeren Mono- und Dinitro-aniline, die Anthranil- und Sulfanilsäuren, für diese Substitutionsreaktionen ungeeignet sind. Die Alkyl-anilinderivate, wie daso-, m- undp-Toluidin (p_K=10–11) bilden dagegen leicht reineckesalzähnliche Verbindungen: Amin· H[Cr(Toluidin)₂(NCS)₄]. Die Zusammensetzung der neuen Komplexanionen wurde bei einer Reihe von doppelten Umsetzungsreaktionen mit den Chlorhydraten einiger heterocyclischen Aminen festgestellt.Für die Klärung einiger Strukturfragen wurden spektrophotometrische Untersuchungen im UV und IR durchgeführt und die thermische Stabilität bzw. der Mechanismus des Pyrolysenvorganges auf thermogravimetrischem Wege verfolgt.

---

Substitution reactions of anhydrous K₃[Cr(NCS)₆] with aromatic amines without applying of solvents were studied.It was observed, that the very weak bases (pK-values 14–16, e.g. isomeric mono- and dinitro-anilines, the anthranilic and sulfanilic acids) are unsuitable for substitution reactions. The alkylaniline derivates e.g.o-, m- andp-toluidine (pK=10–11) form easily reineckesalt analogous compounds: Amin· ·H[Cr(toluidine)₂(NCS)₄]·The formula of the 3 new complex anions: [Cr(toluidine)₂ (NCS)₄]- was established by preparative methods, with a series of double decomposition reactions, using chlorohydrates of some heterocyclic amines for this purpose. From spectroscopical investigations (UV and IR) some structural problems are resolved and discussed.The thermal stability and the mechanism of pyrolysis of these salts was studied by thermogravimetric analysis.

---

---

Mit 8 Abbildungen     

Retention of85Sr and147Pm on insoluble hydroxides and phosphates prepared by the sol-gel procedure

Retention of strontium and promethium on hydroxides (hydrated oxides) and phosphates of iron and chromium prepared by the sol-gel method was studied. The sorption was determined under static conditions depending on the pH of the solution. The sorption isotherms and retention were investigated under dynamic conditions.     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

Automation of the gas analysis of14C-labelled compounds utilizing a piston-type counter tube

In this paper an automatic apparatus designed for the radioactivity measurement of¹⁴C-labelled organic compounds in the gaseous phase is described. The labelled organic compounds are combusted in a mixture of argon and oxygen. After combustion the oxygen content of the gas is eliminated by passing it through a copper packing. The water and heteroelements present are also removed and the radioactive carbon dioxide gas is swept by argon carrier gas into a piston-type counter tube. In the counter tube the piston forming a dividing wall moves forward in accordance with the rate of combustion and sweeping, and thus sucks the gases leaving the combustion tube into the effective tube volume. The anode wire is carried by a reel located in the piston and a spring device ensures its stretched state. At the end of the sweeping period methane is fed into the counter tube and the activity of the argon—methane—carbon dioxide mixture is measured in the limited proportional region. Manual and automatic operation is possible. The piston-type counter tube provides possibility for strandardization by means of extrapolation and for measurement of absolute activities.     

Some investigations on the photostabilization of polypropylene

The effect of substituted hydroxybenzophenone, benzotriazole and organic metal complexes on the photooxidation of PP films has been studied. It has been established that NiDBTC added in 1.0 wt. % is the most effective photostabilizer.While in the case of other stabilizers there is a slight increase in the Co content even during the induction period, with the application of NiDBTC practically no oxidation can be observed before the stabilizer completely disappears. This means that NiDBTC inhibits the photooxidation of the polymer even in low concentration.

---

, - . , Ni, 1,0 . %. . , Ni , . , Ni .

     

Determination of the pH of binary mobile phases for reversed-phase liquid chromatography

The measurement of pH in chromatographic mobile phases has been a constant subject of discussion during many years. The pH of the mobile phase is an important parameter that determines the chromatographic retention of many analytes with acid-base properties. In many instances a proper pH measurement is needed to assure the accuracy of retention-pH relationships or the reproducibility of chromatographic procedures. Three different methods are common in pH measurement of mobile phases: measurement of pH in the aqueous buffer before addition of the organic modifier, measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with standard solutions prepared in the same mobile phase solvent, and measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with aqueous standard solutions. This review discusses the different pH measurement and calibration procedures in terms of the theoretical and operational definitions of the different pH scales that can be applied to water-organic solvent mixtures. The advantages and disadvantages of each procedure are also presented through chromatographic examples. Finally, practical recommendations to select the most appropriate pH measurement procedure for particular chromatographic problems are given.     

Thermal reactivities of potassium and cadmium hydrogenhexavanadates

The thermal reactivities of KHV₆O₁₆·3H₂O and Cd(HV₆O₁₆)₂·12H₂O were investigated. By means of IR spectroscopy and X-ray phase analysis it was found that, after dehydration, both compounds decompose to vanadium pentoxide and the corresponding metavanadate. Potassium metavanadate and vanadium pentoxide react together to form bronzes of different compositions. In contrast, vanadium pentoxide and cadmium metavanadate are the predominant components of the reaction products obtained within the temperature range from 300° to 800°C.     

Thermal investigations on the crystallization of sorbitol

The melting and crystallization of sorbitol were investigated with the DSC method and thermal microscopy. Sorbitol was found to have two crystalline modifications (confirmed by X-ray diffraction) with different melting points, while rapid cooling of molten sorbitol resulted in an amorphous form. The effect of inoculation on the crystallization of the melt was studied too. Powders of both crystalline modifications were used for this purpose. A new technological process for rapid crystallization of molten sorbitol has been worked out on the basis of the thermal analysis results.     

Study of isotope exchange reactions by double labelling

This paper presents the method of double labelling in the study of the kinetics of homogeneous isotope exchange reactions. This method was tested by the determination of the Sn(II)−Sn(IV) exchange rate in hydrochloric acid medium. The system was labelled by the tracer^119mSn [initially in the Sn(IV) state]; when the isotope equilibrium was established, Sn(IV) was again labelled by tracer¹¹³Sn. The separation of Sn(II) and Sn(IV) in the given time of exchange was performed by the extraction of Sn(IV)-hydroxyquinolate into chloroform. The specific activities of the separated components were determined from the ratio of¹¹³Sn and^119mSn activities. The exchange rate was calculated from the time dependence of specific activities. The advantage and possibilities of the method of double labelling in the study of isotope exchange are discussed.