QSAR modeling of flotation collectors using principal components extracted from topological indices

Several topological indices were calculated for substituted-cupferrons that were tested as collectors for the froth flotation of uranium. The principal component analysis (PCA) was used for data reduction. Seven principal components (PC) were found to account for 98.6% of the variance among the computed indices. The principal components thus extracted were used in stepwise regression analyses to construct regression models for the prediction of separation efficiencies (Es) of the collectors. A two-parameter model with a correlation coefficient of 0.889 and a three-parameter model with a correlation coefficient of 0.913 were formed. PCs were found to be better than partition coefficient to form regression equations, and inclusion of an electronic parameter such as Hammett sigma or quantum mechanically derived electronic charges on the chelating atoms did not improve the correlation coefficient significantly. The method was extended to model the separation efficiencies of mercaptobenzothiazoles (MBT) and aminothiophenols (ATP) used in the flotation of lead and zinc ores, respectively. Five principal components were found to explain 99% of the data variability in each series. A three-parameter equation with correlation coefficient of 0.985 and a two-parameter equation with correlation coefficient of 0.926 were obtained for MBT and ATP, respectively. The amenability of separation efficiencies of chelating collectors to QSAR modeling using PCs based on topological indices might lead to the selection of collectors for synthesis and testing from a virtual database.     

Total syntheses of 28,29-diepi-arenamide A, 29-epi-arenamide A, and 28-epi-arenamide A

This communication describes the synthesis of stereochemical analogs of arenamide A, a 19-membered cytotoxic depsipeptide isolated from the fermentation broth of a marine bacterial strain Salinispora arenicola. The key steps are diastereoselective aldol reaction, Mitsunobu reaction, and HATU mediated macrolactamization.     

Ionic liquid/PPh3 promoted cleavage of diphenyl disulfide and diselenide: a straight-forward metal-free one-pot route to the synthesis of unsymmetrical sulfides and selenides

A metal-free cleavage of diphenyl disulfide and diphenyl diselenide has been achieved using ionic liquid/triphenyl phosphine (PPh₃) and a convenient protocol for the one-pot synthesis of unsymmetrical sulfides and selenides by condensing ‘in situ’ generated thiolate or selenate anion with alkyl halides has been developed. In addition, 1,4-conjugate addition of the generated thiolate anions to activated alkenes has also been demonstrated. The ionic liquid, 1-methyl-3-pentyl imidazolium bromide, [pmIm]Br plays a crucial role in promoting the course of the reactions and shows superior activity and selectivity compared to other solvents. The [pmIm]Br has been reused for at least five times without appreciable loss of activity.     

Spectrophotometric Investigation of the Charge–Transfer Interaction of 2,3-Dicyano-1,4-naphthoquinone with N-Ethylaniline in Chlorinated Solvents

The charge?Ctransfer interaction between 2,3-dicyano-1,4-naphthoquinone (DCNQ) and N-ethylaniline was studied in the halocarbons chloroform and dichloromethane and a 1:1 (v/v) mixture of these two solvents. A rapid interaction between DCNQ and N-ethylaniline results in the formation of the monosubstituted final product. The reaction is found to proceed through an initial charge?Ctransfer (CT) complex intermediate. The equilibrium constants of the ??-complex, in all the three media, were evaluated along with first-order and second-order rate constants for the appearance and disappearance of the ??- and ??-complexes. The final product was isolated and characterized by IR, NMR and elemental analysis. Based on the kinetic results a mechanism was proposed for the reaction.     

Cl (Pj)_ fine structure quantum yields from UV dissociation of PCl3, CCl4, CHCl3 and Cl2 in a supersonic jet

Jet-cooled phosphorus trichloride, carbon tetrachloride, chloroform and molecular chlorine are photodissociated in the UV wavelength range 235–238 nm. Chlorine atom photofragments Cl (²P_3/2) and Cl* (²P_1/2) are detected via resonance-enhanced (2+1) ionization throughout the 232–238 nm wavelength region. The relative Cl* yields, φ*=[Cl*]/([Cl]+[Cl*]), are measured for both ³⁵Cl and ³⁷Cl isotopes using the two-photon atomic transitions at 235.3 nm for Cl and 237.8 nm for Cl*. Preliminary results indicate that the Cl* yields are different for the two isotopes for some of the precursors. In addition, we obtained the two-photon oscillator strength of the Cl transition at 237.7 nm relative to the Cl* transition at 237.8 nm. The advantage of using the two-photon Cl transition at 237.7 nm for quantum yield measurements is discussed.     

Physicochemistry of interaction between the cationic polymer poly(diallyldimethylammonium chloride) and the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate in water and isopropyl alcohol-water media

The physicochemistry of interaction of the cationic polymer poly(diallyldimethylammonium chloride) (PDADMAC) with the anionic surfactants sodium dodecyl sulfate, sodium dodecylbenzenesulfonate, and sodium N-dodecanoylsarcosinate was studied in detail using tensiometry, turbidimetry, calorimetry, viscometry, dynamic light scattering (DLS), and scanning electron microscopy (SEM). Fair interaction initially formed induced small micelles of the surfactants and later on produced free normal micelles in solution. The interaction process yielded coacervates that initially grew by aggregation in the aqueous medium and disintegrated into smaller species at higher surfactant concentration. The phenomena observed were affected by the presence of isopropyl alcohol (IP) in the medium. The hydrodynamic sizes of the dispersed polymer and its surfactant-interacted species were determined by DLS measurements. The surface morphologies of the solvent-removed PDADMAC and its surfactant-interacted complexes from water and IP-water media were examined by the SEM technique. The morphologies witnessed different patterns depending on the composition and the solvent environment. The head groups of the dodecyl chain containing surfactants made differences in the interaction process.     

Phospholipid bilayer formation on hydroxyapatite sol-gel synthesized films

Lipid bilayers supported by porous biomaterials are being explored as models for cell membranes. Hydroxyapatite is a relevant material currently being used extensively for biomedical applications. In this study, hydroxyapatite films produced via a sol-gel chemistry route have been characterized and explored as a scaffolding material for lipid membranes. The hydroxyapatite has been characterized using XRD, SEM, and AFM, followed by vesicle-fusion of lipids characterized by fluorescence microscopy and fluorescence recovery after photobleaching (FRAP) to determine the diffusion coefficient of this system. The HA films produced in this work were found to produce slow lateral diffusion and, in the two-phase lipid systems, some domains were observed. The low lateral diffusion coefficients were believed to be a result of the large undulations present on the hydroxyapatite film surface.     

A simple method for simultaneous determination of basic dyes encountered in food preparations by reversed-phase HPLC

The present method utilizes a simple pretreatment step, cleanup on polyamide SPE cartridges, and HPLC resolution on reversed-phase C18 for the detection of the three basic nonpermitted dyes encountered in food matrixes. Polyamide cartridges were chosen because both acidic and basic dyes can be cleaned up due to their amphoteric nature. Analysis was performed on a reversed-phase C18 micro-Bondapak column using the isocratic mixture of acetonitrile-sodium acetate with a flow rate of 1.5 mL/min and a programmable lambda(max) specific visible detection to monitor colors, achieving higher sensitivity and expanded scope to test multicolor blends. All the colors showed linearity with the regression coefficient, from 0.9983 to 0.9995. The LOD and LOQ ranged between 0.107 and 0.754 mg/L and 0.371 and 2.27 mg/L or mg/kg, respectively. The intraday and interday precision gave good RSDs, and percentage recoveries in different food matrixes ranged from 75 to 96.5%. The study demonstrates that the use of a combination of a simple SPE cleanup and HPLC resolution with UV-Vis end point detection was successful in screening the presence of these three basic nonpermitted dyes individually or in blend, in a variety of food matrixes.     

Tetranuclear manganese (III) salicylaldoxime ensemble

Crystal structure of {[Mn(salicylaldoximeH)(salicylaldoxime)]₄} · 3CHCl₃ 1 formed by the interaction of MnCl₂ · 4H₂O and salicylaldoxime in a 1:1 ratio is described. The compound crystallizes in the orthorhombic space group Pbca (No 61) with the lattice parameters; a = 27.769 (3), b = 22.672 (2), c = 21.650 (2) Å, V = 13630 (2) Å³, Z = 8, R ₁ = 0.0776, wR ₂ = 0.2356, S = 1.164. The cluster with four Mn (III) centers formed by four terminal and four bridging salicylaldoxime ligands results in a central rotating wheel-like core with the Mn–Mn separation varying from 3.531 to 3.576 Å and with the diagonal distances being 4.156–4.165 Å. Four intramolecular H-bonds between a terminal oxime (NOH) group and the adjacent phenolate oxygen atom of another ligand stabilize the structure of the cluster. Spectral, magnetic, and cyclic voltammetry studies corroborate a stable Mn (III) tetramer.