Internal reactions of ion–neutral complexes from some disubstituted protonated benzaldehydes and acetophenones

Protonated benzaldehydes ‘a’ and protonated acetophenones ‘b’, substituted by a methoxymethyl group, a hydroxy-methyl group and a mercaptomethyl group, respectively, in position 3, in addition to a methoxymethyl side chain at position 5, have been prepared by electron impact induced dissociation from the corresponding benzylic alcohols. The spontaneous fragmentations of metastable ions of ‘a’ and ‘b’ have been investigated with the aid of specifically deuterated derivatives. Large signals arc observed for the loss of methanol induced by a proton migration across the aromatic ring. The competing loss of H₂O and H₂S, respectively, from the second side chain is less abundant, in agreement with the smaller PA's of HO? and HS? groups. The elimination of HCOX and CH₃COX (X = OCH₃, OH, SH), respectively, from ‘a’ and ‘b’ is also observed. The label distributions for these reactions are in agreement with a mechanism corresponding to an internal reaction of [CHO] ⁺ and [CH₃CO] ⁺, respectively, with the functional group of the side chains in an intermediary ion–neutral complex. In addition, fragmentations are observed arising from reactions between the two side chains at positions 3 and 5. The D labelling proves specific reactions without any H/D exchange and thus reaction channels separated from the methanol loss. The results are explained by internal ion-molecule reactions in an intermediary ion-neutral complex of a methoxymethyl cation, a hydroxymethyl cation and a mercaptomethyl cation, respectively, formed by a protolytic bond cleavage of the side chains.     

High performance liquid chromatographic separation of dipeptide and tripeptide enantiomers using a chiral crown ether stationary phase

A chiral stationary phase (CSP) based on (-)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was evaluated for the direct resolution of the enantiomers of dipeptides and tripeptides. The type and concentration of the acid and the methanol content were optimized with regard to retention time and resolution using Ala-Phe as model peptide. A mobile phase consisting of 10 mM sulfuric acid in 70% aqueous methanol was applied to the separation of a set of 16 structurally diverse dipeptides and tripeptides. Generally, the configuration of the amino acid at the N-terminus determined the enantiomer elution order. With a few exceptions the LL- and LD-enantiomers interacted stronger with the CSP compared to the corresponding DD- or DL-enantiomers. The experimental conditions also allowed the simultaneous separation of all four stereoisomers of Ala-Phe. Addition of ammonium sulfate generally reduced retention times and enantiomer resolution. Addition of triethylamine as modifier led to an overall increase of the retention times while the resolution did not show a general trend, increasing in the case of Ala-Ala but decreasing in the case of Ala-Phe.     

On the synthesis of hypericin by oxidative trimethylemodin anthrone and emodin anthrone dimerization: Isohypericin

Summary The base catalyzed oxidative dimerization of emodin anthrone exclusively yields hypericin. However, on oxidative dimerization of trimethylemodinanthrone a mixture of hexamethylhypericin and hexamethylisohypericin was obtained. Chromatographic separation of the hexabenzoyl derivatives was achieved, and by saponification about equal amounts of hypericin and isohypericrin were produced. Isohypericin could be characterized for the first time by its spectroscopic data and its protonation and deprotonationpK _a andpK _a ^* values.

---

Zur Synthese von Hypericin durch oxidative Dimerisierung von Trimethylemodinanthron und Emodinanthron: Isohypericin

Zusammenfassung Die basenkatalysierte oxidative Dimerisierung von Emodinanthron liefert ausschließlich Hypericin. Oxidative Dimerisierung von Trimethylemodinanthron ergibt jedoch ein Gemisch von Hexamethylhypericin und Hexamethylisohypericin. Die Hexabenzoylderivate wurden chromatographisch getrennt, und Hypericin und Isohypericin konnten aus diesen Derivaten durch Verseifung freigesetzt werden. Isohypercin konnte erstmals durch seine spektroskopischen Daten und seine Protonierungs- und Deprotonierungs-pK _aundpK _a ^* -Werte charakterisiert werden.

     

Permutation representations in molecular symmetry

The reducible representations of the point groups are generally studied because of their relevance to molecular orbital and vibration theory. Triple correlations within the polyhedra are described by group-theoretical invariants that are related to the permutation representations and termed polyhedral isoscalar factors. These invariants are applied in theorems on matrix elements referring to the symmetry-adapted bases at different centres. Further invariants or geometrical weight factors inter-relate different types of reduced matrix elements of irreducible tensors (generalization of the Wigner-Eckart theorem to the polycentric case). As a demonstration a complete tabulation is given for the point group C ₄.     

Development of a robust technique for sampling volatile metal(loid)s in wetlands

The formation of volatile organic and inorganic metals and metalloids in aquatic environments is a known, but not very intensively investigated, process. Several techniques have been developed over the past 10 years to determine these trace components. These techniques are of limited use in wetland environments, where samples have to be taken from the soil-water interface, and require an immediate sample analysis due to thermodynamic instabilities of the volatile metal(loid)s. This paper presents an innovative sampling technique for total concentrations of volatile metal(loid)s in wetlands, based on an in situ gas-water separation via a porous PTFE membrane and stabilising the volatile metal(loid)s in a liquid sorbent (NaOCl solution). Samples may thus be collected even at remote sites, where longer storage times have to be accounted for. The sampling system was tested by means of a laboratory facility simulating the generation of arsine and dimethyl arsine under abiotic conditions as well as under field conditions. Results for sampling efficiency, reproducibility, and long-term storage are presented. Application of the sampling system in the field is shown.     

Migration order of dipeptide and tripeptide enantiomers in the presence of single isomer and randomly sulfated cyclodextrins as a function of pH

The present study was conducted in order to evaluate the cyclodextrin (CD)-mediated chiral separation of peptide enantiomers as uncharged analytes at pH 5.3 using randomly sulfated beta-cyclodextrin, heptakis-6-sulfato-beta-CD and heptakis-(2,3-diacetyl-6-sulfato)-beta-CD as chiral selectors. Although less effective compared to stronger acidic conditions, the CDs proved to be suitable chiral selectors for the present set of peptides at pH 5.3. The carrier ability of the negatively charged CDs upon reversal of the applied voltage may also be exploited leading to a reversal of the migration order. In addition, reversal of the enantiomer migration order upon increasing the buffer pH from 2.5 to 5.3 was also observed for Ala-Tyr in the presence of randomly sulfated beta-CD, for Ala-Phe, Ala-Tyr, Phe-Phe, Asp-PheNH(2) and Gly-Ala-Phe in the presence of heptakis-6-sulfato-beta-CD, and for Phe-Phe and Ala-Leu in the presence of heptakis-(2,3-diacetyl-6-sulfato)-beta-CD. The migration behavior could be explained on the basis of the complexation constants and the mobilities of the peptide-CD complexes. While a change in the affinity pattern of the CDs upon increasing the pH was observed for some peptides, complex mobility was the primary factor for other peptide-CD combinations affecting the enantiomer migration order at the two pH values studied.     

ICP-AES detection of silicon carbide impurities volatilized in a graphite furnace with the use of carbon tetrachloride vapour

The analytical capability of high-temperature halogenation with carbon tetrachloride vapour in a graphite furnace was investigated for silicon carbide powder with known chemical composition and particle size. Intensity vs heating time curves were determined for analytical lines of Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ti, V and Si constituents, volatilized with and without the presence of CCl₄ vapour in the furnace atmosphere. Igniting 10 mg SiC at 2100 °C for 60 s in chlorinating atmosphere, the evaporated fraction of most of the constituents was higher than 90% (for Al about 50%). The line intensity vs sample mass (4–26 mg) relationships were linear for all impurities studied, while the intensity of silicon line showed a relatively small change with the sample mass. BEC (background equivalent concentration) values for this solid sampling technique (10 mg loaded sample) were 2–20 fold lower than those calculated for the conventional solution sample introduction method.     

Ruthenium-catalysed carbenoid cyclopropanation reactions with diazo compounds

The transition-metal catalysed cyclopropanation of olefinic bonds using diazo compounds as a carbene source is among the best developed and most useful transformations available to the synthetic organic chemist. Nevertheless, the quest for new catalyst/ligand systems continues in order to further extend the scope of this method and to identify more economical catalytic systems. In this tutorial review, several different ruthenium complexes are presented which have recently emerged as suitable catalysts for carbenoid cyclopropanation. For the model reaction--cyclopropanation of styrene(s) with diazoacetates--and also for some intramolecular cyclopropanation reactions highly remarkable results in terms of catalyst efficiency, product yields, dia- and enantioselectivity have been reported.     

Diiod(methylthio)gallan. Darstellung und reaktivität

Different synthetic routes for the preparation of diiodo(methylthio)gallane are given. Some reactions of this compound with Lewis bases, such as O(CH₃)₂, S(CH₃)₂, S₂(CH₃)₂, N(CH₃)₃, P(CH₃)₃, and other compounds, such as CH₃I, CH₃OH, C₂H₅OH, C₂H₅SH, i-C₃H₇SH, and C₂H₅SeH are investigated. Spectra and some physical and chemical properties of the new compounds are reported. The structure of diiodo(methylthio)gallane is discussed in view of some interesting differences of this molecule in solution and in crystal form.