Photocatalytic Water Oxidation by a Pyrochlore Oxide upon Irradiation with Visible Light: Rhodium Substitution Into Yttrium Titanate

A stable visible‐light‐driven photocatalyst (λ≥450 nm) for water oxidation is reported. Rhodium substitution into the pyrochlore Y₂Ti₂O₇ is demonstrated by monitoring Vegard′s law evolution of the unit‐cell parameters with changing rhodium content, to a maximum content of 3 % dopant. Substitution renders the solid solutions visible‐light active. The overall rate of oxygen evolution is comparable to WO₃ but with superior light‐harvesting and surface‐area‐normalized turnover rates, making Y₂Ti_1.94Rh_0.06O₇ an excellent candidate for use in a Z‐scheme water‐splitting system.     

Thermal Effects and Structural Changes of Photosynthetic Reaction Centers Characterized by Wide Frequency Band Hydrophone: Effects of Carotenoids and Terbutryn

Photothermal characteristics and light‐induced structural (volume) changes of carotenoid‐containing and noncontaining photosynthetic reaction centers (RCs) were investigated by wide frequency band hydrophone. We found that the presence of carotenoid either does not play considerable role in the light‐induced conformational movements, or these rearrangements are too slow for inducing a photoacoustic (PA) signal. The kinetic component with a few tens of microseconds, exhibited by the carotenoid‐less RCs, appears to be similar to that of triplet state lifetimes, identified by other methods. The binding of terbutryn to the acceptor side is shown to affect the dynamics of the RC. Our results do not confirm large displacements or volume changes induced by the charge movements and by the charge relaxation processes in the RCs in few hundreds of microseconds time scale that accompanies the electron transfer between the primary and secondary electron acceptor quinones.     

Subtle interactions in silica-alumina mixtures

Object of the study in this paper was the mechanical mixtures of amorphous silica and α-Al₂O₃ with different precursors (gibbsite, boehmite, and γ-Al₂O₃). The results obtained revealed that measurable interactions exist in different binary systems without previous thermal treatment. These interactions could be explained by the existence of attractive and repulsive forces which appear between the OH⁻ groups present on the surfaces of alumina and silica constituents. In thermally treated samples, the interactions are not driven by intermolecular forces but rather by polymorphic transformations of alumina and silica, which are followed by sintering.     

Monte Carlo structure simulations for aqueous 1,4-dioxane solutions

Monte Carlo simulations in the NpT ensembles have been performed for the structure exploration of aqueous 1,4-dioxane solutions. Three different systems with all-atom dioxane:TIP4P water molar compositions of 2:500 (code:D2), 8:465 (D8), and 17:425 (D17) modeled solutions of 0.22, 0.88, and 1.86 mol/dm3 concentrations, respectively, at T = 298 K and p = 1 atm. The calculated solution densities increase from 0.992 to 1.002 g/cm3 with increasing dioxane concentration and approach the experimentally determined densities within 1%. This close agreement was achieved by utilizing RESP charges fitted to the in-solution IEF-PCM/B3LYP/6-31G* electrostatic potential of dioxane taken in its chair conformation and recently developed C, H steric parameters for ethers for calculations with a 12-6-1 all-atom potential. Solution structure analyses pointed out that the dioxane molecules arrange in the solutions with favorable distances of 4-8 angstroms for the ring symmetry centers. Within this range not only pairs of rings but triangular triads and tetrads have also been observed with center-center distances <8 angstroms. For the D8 system, about 25% of the sampled configurations included such a triad. In the case of the D17 model, two simulations starting from different solution configuration predicted different degrees for the dioxane aggregation in aqueous solution. In the more aggregated structure 3-21 triads are consistently maintained and 1-2 tetrads are formed in 58% of the configurations. Each dioxane oxygen forms about one hydrogen bond, on average, to a water molecule in the 0.22-1.86 molar range. The most likely O(dioxane)...H(water) hydrogen bond distance is 1.75-1.80 angstroms compared to the optimal distance of 1.72 angstroms in the isolated dimer. The optimal dioxane-water interaction energy of -5.65 kcal/mol indicates a remarkable hydrogen-bond acceptor character for dioxane.     

Protein interaction with a Pluronic-modified poly(lactic acid) Langmuir monolayer

Interaction of bovine serum albumin (BSA) with poly(lactic acid) (PLA) layers mixed with poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers (Pluronic) at air/solution interfaces was studied by the Langmuir balance technique. Wettability of the mixed PLA-Pluronic system was characterized in the form of a transferred one-layer Langmuir-Blodgett film, and considerable hydrophilization was obtained for all of the Pluronics (6400, 6800, 10500, and 12700) applied here. The density of PEO chains in the monolayer and hence the coverage of PLA was controlled by the composition and the compression of the mixed monolayers. Tensiometric investigations revealed that a significant reduction of BSA adsorption/penetration was achieved by applying the Pluronic 6800 and 12700 with long PEO blocks for hydrophilization of PLA. Interaction of BSA with the modified PLA monolayer depended on the density and length of the PEO chains. The surface morphological characteristics of the films determined by atomic force microscopy were in good correlation with the results of BSA interaction. The average roughness of the polymer LB layer was high due to BSA penetration into the PLA film, while smooth surfaces with small roughness were obtained when the PLA layer was modified by Pluronic 6800.     

A new strategy for the preparation of heterocyclic β-amino esters: orthogonally protected β-amino esters with a piperidine skeleton

A simple strategy is presented for the introduction of a nitrogen atom into the carbocycle of an aminocyclopentenecarboxylic ester via dihydroxylation of the olefinic bond, followed by NaIO₄-mediated cleavage of the diol intermediate and ring expansion, resulting in new regioisomeric 3-amino-4-piperidinecarboxylic acid derivatives. This method permits the preparation of amino esters with a piperidine skeleton in enantiomerically pure form.     

Activation mechanism of the human histamine H4 receptor--an explicit membrane molecular dynamics simulation study

Molecular dynamics (MD) simulations in a membrane-embedded environment were carried out on the homology model of the human histamine H4 receptor (hH4R) alone and in complex with its endogenous activator histamine and with the first reported selective hH4R antagonist JNJ7777120. During the simulation of the histamine-hH4R complex, considerable changes occurred in the hH4R structure as well as in the interaction pattern of histamine at the binding site. These changes are in agreement with experimental data published on GPCR activation. In particular, the intracellular side of TM helix VI moved significantly away from TM helices III and VII. Moreover, histamine formed an interaction with Asn147 (4.57) that was previously proved to be important in hH4R activation. Results of the MD simulations of the native hH4R and the JNJ7777120-hH4R complex suggest that these models represent an inactive conformation of hH4R. MD simulation in the presence of JNJ7777120 resulted in the movement of the intracellular side of TM helix VI in the direction of TM helix III. Snapshots of the simulations may serve as functionally relevant models in the development of novel hH4R ligands in the future.     

A fluorescent molecular imaging probe with selectivity for soluble tau aggregated protein

Soluble forms of aggregated tau misfolded protein, generally termed oligomers, are considered to be the most toxic species of the different assembly states that are the pathological components of neurodegenerative disorders. Therefore, a critical biomedical need exists for imaging probes that can identify and quantify them. We have designed and synthesized a novel fluorescent probe, pTP-TFE for which binding and selectivity profiles towards aggregated tau and Aβ proteins were assessed. Our results have shown pTP-TFE to be selective for early forms of soluble tau aggregates, with high affinity of dissociation constants (K_d) = 66 nM, and tenfold selectivity over mature tau fibrils. Furthermore, we found that pTP-TFE is selective for tau over Aβ aggregates and had good cell permeability. This selectivity of pTP-TFE towards early forms of aggregated tau protein ex vivo was also supported with studies on human brain tissue containing tau and Aβ pathology. To the best of our knowledge, this is the first fluorescent molecule to be reported to have this form of selectivity profile, which suggests that pTP-TFE is a unique probe candidate for imaging-based detection of early stages of Alzheimer''s disease and other tauopathies.

pTP-TFE imaging probe can distinguish soluble tau aggregated proteins from other aggregated proteins enabling earlier detection of neurodegenerative diseases.     

Probing small molecule binding to amyloid fibrils

Much effort has focussed in recent years on probing the interactions of small molecules with amyloid fibrils and other protein aggregates. Understanding and control of such interactions are important for the development of diagnostic and therapeutic strategies in situations where protein aggregation is associated with disease. In this perspective article we give an overview over the toolbox of biophysical methods for the study of such amyloid-small molecule interactions. We discuss in detail two recently developed techniques within this framework: linear dichroism, a promising extension of the more traditional spectroscopic techniques, and biosensing methods, where surface-bound amyloid fibrils are exposed to solutions of small molecules. Both techniques rely on the measurement of physical properties that are very directly linked to the binding of small molecules to amyloid aggregates and therefore provide an attractive route to probe these important interactions.     

Methanol synthesis on ZnO(0001). III. Free energy landscapes, reaction pathways, and mechanistic insights

The interplay of physical and chemical processes in the heterogeneous catalytic synthesis of methanol on the ZnO(0001) surface with oxygen vacancies is expected to give rise to a complex free energy landscape. A manifold of intermediate species and reaction pathways has been proposed over the years for the reduction of CO on this catalyst at high temperature and pressure conditions as required in the industrial process. In the present study, the underlying complex reaction network from CO to methanol is generated in the first place by using ab initio metadynamics for computational heterogeneous catalysis. After having "synthesized" the previously discussed intermediates in addition to finding novel species, mechanistic insights into this network of surface chemical reactions are obtained based on exploring the global free energy landscape, which is refined by investigating individual reaction pathways. Furthermore, the impact of homolytic adsorption and desorption of hydrogen at the required reducing gas phase conditions is probed by studying such processes using different charge states of the F-center.