Effect of annealing on the properties of N-doped ZnO films deposited by RF magnetron sputtering

N-doped ZnO films were deposited by RF magnetron sputtering in N₂/Ar gas mixture and were post-annealed at different temperatures (T_a) ranging from 400 to 800 °C in O₂ gas at atmospheric pressure. The as-deposited and post-annealed films were characterized by their structural (XRD), compositional (SIMS, XPS), optical (UV-vis-NIR spectrometry), electrical (Hall measurements), and optoelectronic properties (PL spectra). The XRD results authenticate the improvement of crystallinity following post-annealing. The weak intensity of the (0 0 2) reflection obtained for the as-deposited N-doped ZnO films was increased with the increasing T_a to become the preferred orientation at higher T_a (800 °C). The amount of N-concentration and the chemical states of N element in ZnO films were changed with the T_a, especially above 400 °C. The average visible transmittance (400-800 nm) of the as-deposited films (26%) was increased with the increasing T_a to reach a maximum of 75% at 600 °C but then decreased. In the PL spectra, A⁰X emission at 3.321 eV was observed for T_a = 400 °C besides the main D⁰X emission. The intensity of the A⁰X emission was decreased with the increasing T_a whereas D⁰X emission became sharper and more optical emission centers were observed when T_a is increased above 400 °C.     

The use of dilatometry aiming to evaluate the metallurgical aspect of coil slump in a hot-rolled medium carbon steel

Journal of Thermal Analysis and Calorimetry - The hot coil slump is a recurrent problem in the manufacturing process of medium and high equivalent carbon steel plates. Even with the success of the...     

New di‐ and triorganotin(IV) carboxylates derived from a Schiff base: synthesis,characterization and in vitro antimicrobial activities

A new carboxylic acid, 2‐{[5‐(2‐nitrophenyl)furan‐2‐yl]methyleneamino}benzoic acid (HOBZ), has been produced by reacting 5‐(2‐nitrophenyl)furfural with 2‐aminobenzoic acid. Reactions of NaOBZ with organotin chlorides led to formation of [Me₃Sn(OBZ)] ( 1 ), [Bu₃Sn(OBZ)] ( 2 ), [Me₂Sn(OBZ)₂] ( 3 ) and [Bu₂Sn(OBZ)₂] ( 4 ). Complexes 1 , 2 , 3 , 4 have been characterized using elemental analyses and infrared, ¹H NMR, ¹³C NMR, ¹¹⁹Sn NMR and ¹¹⁹Sn Mössbauer spectroscopies. In the solid state, the OBZ ligands might coordinate to tin in an anisobidentate fashion via the carboxylate group. The in vitro antimicrobial activity of all compounds has been screened against the following fungi: Aspergillus niger, A. flavus, A. parasiticus, Penicillium citrinum, Candida dubliniensis, C. lusitaniae, C. albicans, C. tropicalis, C. parapsilosis and C. glabrata; and against the following bacteria: Staphylococcus aureus, Listeria monocytogenes, Bacillus cereus, Streptococcus sanguinis, Escherichia coli, Citrobacter frendii, Salmonella typhimurium and Pseudomonas aeruginosa. Complexes 2 and 4 exhibited higher biocide activity in comparison to 1 and 3 and to the control drugs nystatin and miconazole nitrate for the yeasts, and chloramphenicol and ampicillin for the bacteria. The biological activity of 2 was superior to that of 4 . In addition, the toxicity of HOBZ, NaOBz and 1 , 2 , 3 , 4 were determined using Chlorella vulgaris, revealing low toxicity of the complexes at MIC₅₀ concentrations. We also performed cell viability studies, using XTT assay, displaying no change in the mitochondrial function after 2–4 h of exposure of the microorganism to the complexes at MIC₅₀ concentrations. The butyl‐containing complexes 2 and 4 display greater lipophilicities than do the methyl analogues 1 and 3 , thereby endowing 2 and 4 with superior abilities to cross the microbe cell membrane, the possible mechanism of action. Copyright © 2015 John Wiley & Sons, Ltd.     

Evaluation of Polyphenols in Wine by Voltammetric Techniques with Screen Printed Carbon Electrodes

The electrochemical oxidation processes that occur during a voltammetric assay in wine samples lead to the formation of species that obstructs the surface and reduce their active area. This effect is critical for screen printed carbon electrodes (SPCE) and leads to abnormal low values of the total polyphenols content of wines, ca. 72 % lower than those obtained with glassy carbon electrodes. This effect was examined using 10 red and Port wine samples. Mechanical polishing and electrochemical‐based treatments for the removal of this fouling layer were tested. The best results were obtained by electrochemical activation in at a constant potential of 1.2 V during 100 s Na₂CO₃ saturated solution, and by polishing. The success of some of these treatments brings an added value to SPCE, as it opens the possibility of their reuse in the wine analysis. This outcome is particularly relevant for quality control where a huge number of analysis is performed and the reduction of cost may dictates the choice of the analytical method.     

Interaction of self-assembled monolayers of DNA with electrons: HREELS and XPS studies

We present results from high-resolution electron energy loss spectroscopy (HREELS) and XPS studies of self-assembled monolayers of DNA. The monolayers are well-organized and display sharp vibrational peaks in the HREEL spectra. The electrons interact mainly with the backbone of the DNA. The XPS results indicate that, in most of the samples studied, the phosphates on the DNA are not charged.     

Improvements in cobalt determination by thermospray flame furnace atomic absorption spectrometry using an on-line derivatization strategy

An on-line derivatization strategy was developed for improving cobalt sensitivity using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS) as the analytical technique. This strategy involves the generation of a volatile cobalt compound, providing better sample vaporization efficiency. The effect of sodium diethyldithiocarbamate (DDTC) as complexing agent on the integrated absorbance signal was evaluated. Parameters including the pH of complex formation, complex concentration and volume, sample volume, flame gas composition and tube atomization configuration were optimized. A wide linear range (from 23 microg L(-1) to 3 mg L(-1); r(2)=0.9786) was obtained, with the best one (r(2)=0.9992) attained from 23 to 400 microg L(-1) with a sample throughput of 30 h(-1). The improvement in the detection power was 17-fold when compared to FAAS, which provides 7 microg L(-1) as the limit of detection when considered TS-FF-AAS technique. A relative standard deviation (n=10) of 4% for a cobalt solution containing 50 microg L(-1) was attained, and the accuracy of the procedure was evaluated through certified reference materials (IAEA-SL-1, lake sediment; and ISS-MURST-A1, Antarctic marine sediment). Good agreement between the results at the 95% confidence level was observed.