偶极子在径向非均匀介质中的电磁场分布

提出了柱状多层介质中的磁偶极子在任意介质层中的电磁场的递推算法，给出了磁偶极子产生的电磁波在柱状多层介质中的反射、透射系数和广义反射系数，从而得到了任意介质层中满足各层界面边界条件的电磁场解析表达式．     

Interlaboratory evaluation of hydrophone sensitivity calibration from 0.1 to 2 MHz via time delay spectrometry

Knowing the low-frequency response of hydrophones, down to 100 kHz at least, is important for accurate biomedical ultrasound measurements. However, current international standards do not extend below 500 kHz. Furthermore, commercial hydrophone sources typically do not supply sensitivity data below 1-2 MHz. Therefore, to help identify and validate practical calibration methods below 2 MHz, the authors have extended their previous individual efforts in an interlaboratory evaluation of sensitivity calibration using the swept-frequency technique, time delay spectrometry (TDS). Calibrations were performed for needle and membrane PVDF hydrophones using each laboratory's TDS system. Each site employed the same purpose-built broadband source transducers, comprising both plano-concave and biconcave 1-3 piezocomposite elements 4 cm in diameter, with maximum and minimum thicknesses of approximately 1.5 and 0.1 cm. Agreement between laboratories was within the estimated measurement precision of +/-0.6 dB. The results demonstrated that a TDS system employing such transducers constitutes a viable method for hydrophone calibrations in this frequency range.     

Experimental confirmation of a new reversed butterfly-shaped attractor

This paper reports a new reverse butterfly-shaped chaotic attractor and its experimental confirmation. Some basic dynamical properties, and chaotic behaviours of this new reverse butterfly attractor are studied. Simulation results support brief theoretical derivations. Furthermore, the system is experimentally confirmed by a simple electronic circuit.     

Rotation selectivity of random phase encoding in volume holograms

We present the study of angular selectivity for holographic multiplexing based on random phase encoding by a ground glass. The rotational selectivity of the volume hologram is calculated theoretically and coincides with the experimental measurement. By controlling the parameters including rotational center, effective numerical aperture of both volume hologram and the ground glass, we can obtain different rotational selectivity applied to random phase encoding in volume holographic storage.     

Study on improving output capability of high-power lasers providing short pulses by using different laser glasses together in the amplifier chain

We have discussed the optical and laser properties of different laser glass types. According to the properties of the gain and the B integral in the high-power laser amplifier chain, an optimal configuration is pointed out to improve the output capability at short pulses based on reducing nonlinear refractive index n₂. In this way, high gain glasses and low n₂ glasses are used in different amplifier stages simultaneously. The simulated results show that on the condition that the maximal output energies of both the configurations are same at 3 and 5 ns, the maximal output capability growth ratio of 30.48% () and 42.24% () for the optimal configuration can be obtained at 1 ns, respectively.     

Imaging in turbid media with intensity-modulated lasers

We describe the formation of a narrow beam for intensity-modulated electromagnetic radiation propagating through highly scattering materials. We propose to use this beam to reconstruct images, similar to X-ray back-projection techniques. For sufficiently high modulation frequency, the photon density wave is primarily carried by photons that suffer small or no large-angle scattering, which gives rise to the beam’s narrow divergence. The beam-narrowing concept is supported by large-scale numerical simulations to examine the quality of the imaging.     

Quantitative analysis of thin samples by differential absorption imaging using a laser-plasma soft X-ray source

We consider the application of the differential absorption imaging technique in the soft X-ray region. The surface-density maps of test samples containing bromine, resulting from the application of the differential absorption imaging technique, are presented. Images of the samples were obtained in an X-ray monochromatic projection imaging scheme based on a spherically bent crystal using line emission close to the $L_2$ edge of bromine from a microplasma produced by focusing a nanosecond laser on the surface of an aluminum target.     

Extraction of local coordination structure in a low‐concentration uranyl system by XANES

Obtaining structural information of uranyl species at an atomic/molecular scale is a critical step to control and predict their physical and chemical properties. To obtain such information, experimental and theoretical L₃‐edge X‐ray absorption near‐edge structure (XANES) spectra of uranium were studied systematically for uranyl complexes. It was demonstrated that the bond lengths (R) in the uranyl species and relative energy positions (ΔE) of the XANES were determined as follows: ΔE₁ = 168.3/R(U—O_ax)² ? 38.5 (for the axial plane) and ΔE₂ = 428.4/R(U—O_eq)² ? 37.1 (for the equatorial plane). These formulae could be used to directly extract the distances between the uranium absorber and oxygen ligand atoms in the axial and equatorial planes of uranyl ions based on the U L₃‐edge XANES experimental data. In addition, the relative weights were estimated for each configuration derived from the water molecule and nitrate ligand based on the obtained average equatorial coordination bond lengths in a series of uranyl nitrate complexes with progressively varied nitrate concentrations. Results obtained from XANES analysis were identical to that from extended X‐ray absorption fine‐structure (EXAFS) analysis. XANES analysis is applicable to ubiquitous uranyl–ligand complexes, such as the uranyl–carbonate complex. Most importantly, the XANES research method could be extended to low‐concentration uranyl systems, as indicated by the results of the uranyl–amidoximate complex (～40 p.p.m. uranium). Quantitative XANES analysis, a reliable and straightforward method, provides a simplified approach applied to the structural chemistry of actinides.     

为什么要选择电表的合适量程

电表的量程选择合适，能减小测量值的误差．中学常用的电压表（J0408）、电流表（J0407）准确度均为2．5级．现根据电表的准确度来确定实验误差范围．