Electron screening in backward elastic scattering

Abstact: The elastic scattering cross sections, σ (E,θ), for the systems He+Ta and He+W have been measured at θ_lab=165° and E _lab=76.1 keV to 3.988 MeV using targets with a thickness of a few atomic layers. The results are smaller than the results given by the Rutherford scattering law, σ_R(E,θ), due to the effects of electron screening and can be described by σ(E,θ)/σ_R(E,θ)=(1+U_e/E)⁻¹, where U _e is an atomic screening potential energy. The deduced average value, U _e=28 ± 3 keV, is consistent with the Moliére- and Lenz-Jensen-models as well as electron binding energies. Received: 25 May 1998     

D→Klv～l衰变过程的研究

用光锥QCD求和规则研究D→Klv～_l衰变过程，首先计算D→K跃迁形状因子，通过构造新的关联函数，消除了twist-3波函数的不确定性给计算结果所带来的影响，从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致. 关键词： QCD光锥求和规则 D介子半轻衰变 分支比 形状因子     

Interplay of charge, spin, orbital and lattice correlations in colossal magnetoresistance manganites

We derive a realistic microscopic model for doped colossal magnetoresistance manganites, which includes the dynamics of charge, spin, orbital and lattice degrees of freedom on a quantum mechanical level. The model respects the SU(2) spin symmetry and the full multiplet structure of the manganese ions within the cubic lattice. Concentrating on the hole doped domain ( 0≤x≤0.5) we study the influence of the electron-lattice interaction on spin and orbital correlations by means of exact diagonalisation techniques. We find that the lattice can cause a considerable suppression of the coupling between spin and orbital degrees of freedom and show how changes in the magnetic correlations are reflected in dynamic phonon correlations. In addition, our calculation gives detailed insights into orbital correlations and demonstrates the possibility of complex orbital states. Received 4 September 2002 / Received in final form 8 November 2002 Published online 31 December 2002     

Selection and Scheduling of Advanced Missions for NASA Using 0-1 Integer Linear Programming

A 0-1 integer linear programme for the selection and scheduling of US National Aeronautics and Space Administration (NASA) missions over a long planning horizon is presented. This model was formulated to allow a higher-level user-interaction with an advanced missions database currently being developed. The model implicitly considers the multi-objective nature of the problem, which results from the desire to maximize benefits in several categories as well as from the desire to minimize cost. In addition, the model allows the planner much flexibility in the selection process. This is accomplished by allowing the planner the ability to specify long- or short-term budget constraints, precursor/follow-on mission requirements, or any number of other idiosyncratic constraints which might be of importance in the decision process. Small example problems are solved in order to illustrate the approach, and areas for further research are discussed.     

InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Highly soluble and optically transparent poly (ether imide)s based on 2,6‐ or 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and aromatic bis(ether amine)s bearing trifluoromethyl groups

Two series of novel fluorinated poly(ether imide)s (coded IIIA and IIIB ) were prepared from 2,6‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride and 2,7‐bis(3,4‐dicarboxyphenoxy)naphthalene dianhydride, respectively, with various trifluoromethyl‐substituted aromatic bis(ether amine)s by a standard two‐step process with thermal or chemical imidization of the poly(amic acid) precursors. These fluorinated poly(ether imide)s showed good solubility in many organic solvents and could be solution‐cast into transparent, flexible, and tough films. These films were nearly colorless, with an ultraviolet–visible absorption edge of 364–386 nm. They also showed good thermal stability with glass‐transition temperatures of 221–298 °C, 10% weight loss temperatures in excess of 489 °C, and char yields at 800 °C in nitrogen greater than 50%. The 2,7‐substituted IIIB series also showed better solubility and higher transparency than the isomeric 2,6‐substituted IIIA series. In comparison with nonfluorinated poly (ether imide)s, the fluorinated IIIA and IIIB series showed better solubility, higher transparency, and lower dielectric constants and water absorption. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5909–5922, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

The newton filtration and d-determination of bifurcation problems related to C 0 contact equivalence

In this paper, from the Newton filtration’s point of view, we construct the singular Riemannian metric and use the method in singular theory to study the bifurcation problems, and give the sufficient condition of d-determination of bifurcation problems with respect to C ⁰ contact equivalence. The special cases of the main result in this paper are the results of Sun Weizhi and Zou Jiancheng.     

Establishment of hybrid-derived offspring populations in the Ohomopterus ground beetles through unidirectional hybridization

An approach to deduce the mechanism of stabilization of the hybrid-derived populations in the Ohomopterus ground beetles has been made by comparative studies on the phylogenetic trees of the mitochondrial and nuclear DNA. A phylogenetic tree based on the internal transcribed spacer (ITS) of nuclear ribosomal gene roughly reflects the relations of morphological species group, while mitochondrial NADH dehydrogenase subunit 5 (ND5) gene shows a considerable different topology on the tree; there exist several geographically-linked lineages, most of which consist of more than one species. These results suggest that the replacement of mitochondria has occurred widely in the Ohomopterus species. In most cases, hybridization is unidirectional, i.e., the species A (♂) hybridized with another species B (♀) and not vice versa, with accompanied replacement of mitochondria of A by those of B. The results also suggest that partial or complete occupation of the distribution territory by a hybrid-derived morphological species. The morphological appearance of the resultant hybrid-derivatives are recognized as that of the original species A. Emergence of a morphological new species from a hybrid-derived population has been exemplified.