Ion-interaction chromatography of several metallocyanide complexes stabilized by adding cyanide in a neutral mobile phase.

Standard solutions (at 10(-5) M levels) of Cu(I)- and Fe(II)-cyanide complexes were stabilized for at least 5 h using 0.5 mM cyanide solution (around pH 9) as a medium. Complexes of Cu(I)- and Fe(III)-cyanide also could be stabilized without any dissociation by adding 1 mM cyanide to an acetonitrile-water (18:82, v/v) mobile phase (pH 7.0) containing 10 mM tetra-n-propylammonium salt (TPA). Under the optimal conditions, the six complexes of Cu(I)-, Ag(I)-, Ni(II)-, Fe(II)-, Fe(III)- and Au(I)-cyanides were resolved from their mixtures within about 45 min, with well-shaped chromatographic peaks.     

Dense amorphous packing of binary hard sphere mixtures with chemical order: The stability of a solute ordered approximant

Recently, Miracle proposed that the intermediate structure in metallic glasses could be usefully characterized as an ordered face centered cubic packing of solute-centered coordination clusters. In this paper we examine the stability of such solute ordered arrangements in binary hard sphere mixtures subject to density maximization through local particle moves.     

Fluorine incorporation in silica glass by the MCVD process: Study of fluorine incorporation zone,evaluation of optical properties and structure of the glass

A theoretical approach was made to find out a complete fluorine incorporation zone on a ternary diagram which serves as a useful graphical representation to select the flows of the supplied reagents for incorporation of the suitable amount of fluorine into cladding glass of optical fiber preform made by the MCVD process using CCl₂F₂ as a source of fluorine under oxygen abundance, oxygen deficiency and intermediate oxygen state conditions. The possible mechanism for incorporation of fluorine into cladding glass of optical fiber is also evaluated on the basis of the thermodynamical data. The fluorine incorporation mechanism in silica glass by the MCVD process is found to be dependent on the CCl₂F₂/SiCl₄ ratio in the input gas mixture. Fluorine doping is found to be effective for removing the strained Si–O–Si bonds, which govern the optical transparency in deep ultra-violet (DUV) and vacuum ultra-violet (VUV) regions. The maximum refractive index depression of ?0.5 × 10^?3 is obtained with incorporation of fluorine into silica cladding glass by the MCVD process using CCl₂F₂ as a dopant precursor with suitable flow of SiCl₄ vapor along with O₂ through backward deposition pass. The structure of fluorine doped silica glass preform samples containing 1.70–1.79 mol% fluorine incorporated by the MCVD process based on the analyses of ¹⁹F MAS spectra done by high-resolution ¹⁹F NMR spectroscopy reveal the presence of two distinct types of fluorine environments. The majority of the fluorine environments are formed in SiO_1.5F polyhedral and less abundant species is observed to be highly unusual, yielding a fivefold coordinated silicon of the type SiO₂F polyhedral which become increased with increasing the fluorine content.     

Does an all-sulphur analogue of heptamolybdate exist?

The complexes [MoX₄]²⁻ (M = Mo; X = O or S) exist as the monomeric tetrahedral species in aqueous alkaline solutions. Acidification of tetraoxomolybdate results in the condensation of the tetrahedral units via a series of polyoxomolybdates leading to the ultimate formation of the trioxide MoO₃. Heptamolybdate [Mo₇O₂₄]⁶⁻ is the first major polyanion of the acidification reaction. In contrast, acidification of tetrathiomolybdates leads to the formation of amorphous molybdenum trisulphide via a dinuclear Mo(V) complex. The formation of the dinuclear Mo(V) complex precludes the formation of any higher nuclearity Mo(VI)-S complexes in aqueous solution. Thus it is shown that the all-sulphur analogue of heptamolybdate [M0₇S₂₄]⁶⁻ does not exist in alkaline medium and also cannot be isolated from aqueous acidic medium     

Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

Special points for calculating integrals over the primitive cell of a periodic system

A method is proposed for constructing appropriate sets of special points in the Brillouin zone in which the extended unit cell method is used with a subsequent shift from the center of the reduced Brillouin zone. The proposed method offers several advantages over the commonly used Monkhorst-Pack method. The difference in the construction of sets of special points for the direct and reciprocal lattices is discussed for crystals belonging to a nonsymmorphic space group. The cases of a planar square lattice and an fcc lattice are considered to illustrate general results.     

Effect of lattice deformation and phase transitions on the electronic spectra of TlGaS<Subscript>2</Subscript>, TlGaSe<Subscript>2</Subscript>, and TlInS<Subscript>2</Subscript> layered semiconductors

The effect of the lattice deformation on the electronic spectra of TlGaS₂, TlGaSe₂, and TlInS₂ layered semiconductor crystals is analyzed. It is shown that changes in the band gap of these semiconductors due to thermal expansion and a change in the composition under hydrostatic or uniaxial pressure can be described within a unified model of the deformation potential. The main feature of this model is the inclusion of deformation potentials with different signs, which is characteristic of other semiconductors with a layered structure. An analysis of the lattice deformation of the studied semiconductors in terms of the proposed model of the deformation potential has revealed that, in the immediate vicinity of the phase transitions, the crystal lattice under pressure undergo an unusual deformation.     

The effect of high electric fields on the structure and dielectric properties of the B2 phase

Dielectric studies are presented of a banana-shaped compound that exhibits the antiferroelectric B₂ phase. Upon application and subsequent removal of strong electric fields the textures and dielectric properties of the phase drastically change. Most notable is the huge increase of the low frequency permittivity. This behaviour would suggest the induction of ferroelectricity by the electric field.     

Highly edge‐connected detachments of graphs and digraphs

Let G = (V,E) be a graph or digraph and r : V → Z₊. An r‐detachment of G is a graph H obtained by ‘splitting’ each vertex ν ∈ V into r(ν) vertices. The vertices ν₁,…,ν_r(ν) obtained by splitting ν are called the pieces of ν in H. Every edge uν ∈ E corresponds to an edge of H connecting some piece of u to some piece of ν. Crispin Nash‐Williams 9 gave necessary and sufficient conditions for a graph to have a k‐edge‐connected r‐detachment. He also solved the version where the degrees of all the pieces are specified. In this paper, we solve the same problems for directed graphs. We also give a simple and self‐contained new proof for the undirected result. © 2003 Wiley Periodicals, Inc. J Graph Theory 43: 67–77, 2003