Synthesis and Electrochemical Studies of Spinel LiNi1−xMnxVO4

Spinel compound LiNi_1−xMn_xVO₄ (0≤x≤0.4) had been prepared by using the moist chemical method. X-ray diffraction spectra showed that the lattice constant increased with x in the LiNi_1−xMn_xVO₄, XPS spectra indicating that Li1s had a chemical shift towards lesser binding energy, and manganese in LiNi_1−xMn_xVO₄ existing as the mixed valence of Mn²⁺ and Mn³⁺. The electrochemical charge and discharge testing at a current density of 0.1 mA/cm² between the potentials of 4.0 and 3.0 V vs Li/Li⁺ in 1 mol/dm³ LiPF₆/EC+DEC (1:1 by volume) at 25°C showed that LiNi_1−xMn_xVO₄ cell has a better rechargeability, but a lower cell voltage of 4.0 V vs Li/Li⁺ than that without the doping sample, and the capacity and the cycle efficiency of the Li/LiNi_1−xMn_xVO₄ cells increased with x in the LiNi_1−xMn_xVO₄.     

RNA Methylation m6A: A New Code and Drug Target?

The m⁶A‐RNA modification is a dynamic and reversible process, which has emerged as a new RNA code for the regulation of gene expression. The functional network of methyltransferases (writers), demethylases (erasers), and binding proteins (readers) modulate the level of m⁶A modification. Dysfunction of RNA methylation has been associated with various fundamental biological processes and human diseases. Herein, we briefly introduce an understanding‐enabled manipulation on m⁶A‐RNA modification with an emphasis on the use of small‐molecule intervention.      

Synthesis and photopolymerization of monomers bearing isopropenylphenoxy groups

The synthesis of a series of monomers containing isopropenylphenoxy groups was carried out. On irradiation with UV light in the presence of onium salt photoacid generators, these monomers undergo a chain extension reaction consisting of a dimerization followed by a Friedel-Crafts ring closure which results in the formation of polymers with indane groups in the backbone. Aryl imide-containing monomers bearing isopropenylphenoxy groups were also shown to undergo facile photoinduced cationic polymerization. The resulting polymers displayed excellent thermal stability. © 1995 John Wiley & Sons, Inc.     

Diffraction techniques for nonlamellar phases of phospholipids

A neutron diffraction method applicable to nonlamellar phases of substrate-supported lipid membranes is described and validated. When prepared on a flat substrate, the resulting nonlamellar phases have layered symmetry which provides some advantages over powder diffraction for detailed structure determination. This approach recently led to the detection of a rhombohedral phase and a distorted hexagonal phase of lipids. Here the determination of intensity and phase information for such phases is demonstrated by application to the hexagonal phase of diphytanoyl phosphatidylcholine (DPhPC). The hexagonal symmetry is used to verify the data reduction procedure for the intensities of the diffraction peaks. Diffraction intensities measured while varying the D2O/H2O ratio in the relative humidity was used to solve the phase problem. The neutron scattering length density distribution of the hexagonal phase was constructed and analyzed to elucidate the packing of the lipid molecules. The structure of DPhPC in the hexagonal phase is of interest in connection with its stalk structure in the rhombohedral phase. We also found that the incorporation of tetradecane into the DPhPC hexagonal phase is limited, similar to the case for dioleoyl phosphatidylethanolamine.     

Improving the quality of 3D-QSAR by using flexible-ligand receptor models

To address the problems associated with molecular conformations and alignments in the 3D-QSAR studies, we have developed the Flexible Ligand - Atomic Receptor Model (FLARM) 2.0 method. The FLARM 2.0 method has three unique features as compared to other pseudoreceptor model methods: (1) the training ligands are flexibly optimized inside the receptors to achieve minimal docking energies; (2) the receptor atoms are spatially moveable in the process of genetic evolving in order to avoid improper initial receptor shapes; and (3) void receptor sites are specially favored in order to obtain open receptor models that allow large gaps. Advantages of an open model include less noise information, a smaller risk of overfitting, and ease of locating the key interaction sites. The latter two features, inherited from the previous FLARM 1.0 method, can improve the predictive ability of the 3D-QSAR models, while the first feature is newly implemented to relieve the uncertainty caused by improper conformation and alignment. Three FLARM 2.0 case studies were performed, and the results show that FLARM 2.0 models are highly predictive and robust. FLARM 2.0 pseudoreceptor models can correspond well with the pharmacophore models and/or the binding sites of the real protein receptors.     

Studies on the thermotropic liquid crystalline polymer. VII. Synthesis and properties of photocrosslinkable poly(ether-ester) containing cinnamic group

A series of semi-aromatic poly(ether-ester)s containing cinnamic group was prepared from 4,4′-diacrylic acid-α,ω-phenoxyalkanes with diols in the presence of diphenylchlorophosphate (DPCP) and pyridine as a catalyst and solvent. The phase behavior of these polymers was studied by differential scanning calorimetry (DSC), optical polarizing microscopy equipped with a heating stage, and wide-angle x-ray diffraction (WAXD). All of the poly(ether-ester)s, except P3 , show nematic or smectic thermotropic liquid crystalline behaviour under optical polarizing microscopic observation. These polymers can undergo photocrosslinking reaction upon heating, as examined by IR, solubility, and DSC analysis. © 1993 John Wiley & Sons, Inc.     

偶合反应化学发光法测定痕量银的研究

本将Ａｇ（Ⅰ）催化Ｓ２Ｏ＾２－８氧化Ｍｎ（Ⅱ）生成ＭｎＯ＾－４的催化反应与ＬｕｍｉｎｏｌＭｎＯ＾－４－ＯＨ＾－的化学发光反应相偶合，建立起一种新的灵敏测定痕量银的化学发光分析法，在所研究的优化条件下，该法测定银的选择性较好，检测限达到３．２×１０＾－１２ｇ／ｍＬＡｇ线性浓度范围为１．０×１０＾－１１－１．０×１０＾－５ｇ／ｍＬＡｇ，用于水样分析，结果较为满意。     

Effect of the polarity of additional solvent on membrane formation in polysulfone/N-methyl-2-pyrrolidone/water ternary system

Asymmetric polysulfone membranes were prepared by wet phase inversion method with different demixing rate of casting solutions. The influent factor of demixing rate was focused on the polarity of additive in the polysulfone/N-methyl-2-pyrrolidone/water ternary system. With increasing the polarity of alcohols in the casting solution, the decrease in skin layer thickness was observed and then a poor separation performance of membranes can be obtained. It was found that the polar additive caused the rapidly demixing of casting solution in coagulation bath and formed porous asymmetric membranes with defective skin layer. In the other case, chloroform was used as the non-polar additive in casting solution. With increasing the mount of chloroform in the casting solution, the increase in skin layer thickness was observed and then lead to a good separation performance of these membranes. It was found that of the non-polar additive delays the demixing rate of casting solution in this ternary system. The separation performance of these asymmetric membranes were characterized by the measurement of dehydration of ethanol/water mixture by pervaporation and observed the morphology by scanning electron microscopy. It was found that the separation performance of asymmetric polysulfone membrane strongly depends on the polarity of adding solvent in polysulfone/N-methyl-2-pyrrolidone/water ternary system.     

Arylcarbamoylated allylcarbamido-β-cyclodextrin: synthesis and immobilization on nonfunctionalized silica gel as a chiral stationary phase

Four new chiral stationary phases based on mono-(6^A-allylcarbamido-6^A-deoxy)-arylcarbamoylated β-cyclodextrin were synthesized. The chiral stationary phase of phenylcarbamoylated β-cyclodextrin exhibited excellent separation capability for a variety of chiral compounds. Compared with the previous work, it was found that the spacer remained on the surface of the silica gel and decreased the enantioseparation capability.     

Atomic radical—molecule reactions F + CH<Subscript>3</Subscript>C≡CH: mechanistic study

The reaction of atomic radical F with propyne has been studied theoretically using ab initio quantum chemistry methods and transition state theory. The potential energy surface was calculated at the CCSD(T)/aug-cc-pVDZ (single-point) level using the UMP2/6-311++G(d,p) optimized structures. Two reaction mechanisms including the addition–isomerization–elimination reaction mechanism and the directed hydrogen abstraction reaction mechanism are considered. For the hydrogen abstraction reactions, i.e., the most probable evolution pathway in the title reaction, the HF formation occurs via direct abstraction mechanism dominantly and the H atom picked up by the atomic radical F should come mostly from the methyl group of normal propyne. On the other hand, for the addition–isomerization–elimination mechanism, the most feasible pathway should be the atomic radical F attacking on the C≡C triple bond in propyne (CH₃C≡CH) to form a weakly-bound adduct A1 with no barrier, followed by F addition to the C≡C triple bond to form the low-lying intermediate isomer 5. Subsequently, isomer 5 directly dissociates to P3 H₂CCCHF + H via transition state TS₅/P3. The other reaction pathways on the doublet PES are less competitive due to thermodynamical or kinetic factors. Furthermore, based on the analysis of the kinetics of all channels through which the addition and abstraction reaction proceed, we expect that the competitive power of reaction channels may vary with experimental conditions for the title reaction. The present work will provide useful information for understanding the processes of atomic radical F reaction with other unsaturated hydrocarbons. This material is available from author via E-mail.