仿细胞膜结构共聚物的合成及涂层性能

采用饥饿法将2-甲基丙烯酰氧乙基磷酰胆碱(MPC)分别与甲基丙烯酸十八烷基酯(SMA)、 甲基丙烯酸十二烷基酯(LMA)及甲基丙烯酸正丁酯(BMA)聚合, 通过改变投料比例和沉淀剂种类, 合成了一系列含磷酰胆碱基团的仿细胞膜结构的两亲性二元随机共聚物. ¹H NMR和元素分析结果表明, 合成的两亲性二元随机共聚物的组成与投料比相近. DSC结果表明, 聚合物具有较低的玻璃化转变温度. 表面张力及水的动态接触角(DCA)研究发现, 聚合物涂层表面具有明显的两亲性及表面结构易变性, 在空气中憎水基团在表面取向, 在水环境中亲水的磷酰胆碱基团则迁移取向到涂层表面形成仿细胞外层膜结构界面, 最终形成不溶于水的仿细胞膜结构涂层.     

Excitation Wavelength Dependent Fluorescence of an ESIPT Triazole Derivative for Amine Sensing and Anti‐Counterfeiting Applications

Excitation wavelength dependent (Ex‐De) emission materials have potential applications in anti‐counterfeiting labels and bioimaging. Nevertheless, few purely organic chromophores are used in these areas. In this study, multiple excited states were incorporated into a molecule that was excited state intramolecular proton transfer (ESIPT) active, with the goal of manipulating the relaxation pathways of the excited states. The triazole derivative exhibits Ex‐De photoluminescence (PL), and the maximum PL wavelength is located at 526 nm and 593 nm under a series of excitation wavelengths. Spectral identification indicates that the excimer and ESIPT processes are responsible for the green (526 nm) and orange (593 nm) fluorescence, respectively. Importantly, the quick response code and test strip prepared with this triazole derivative can be used for anti‐counterfeiting and food spoilage detection applications, respectively. This research opens the door for developing novel Ex‐De materials for anti‐counterfeiting purposes.     

聚醚类破乳剂的界面扩张流变性质

采用悬挂滴方法研究了不同结构聚醚类破乳剂与煤油间的界面张力及界面扩张流变性质. 结果表明, 4种聚醚类破乳剂均具有较强的降低界面张力能力, 且支链化程度越低分子在界面上排列越紧密, 直线型破乳剂在低浓度条件下界面张力最低. 破乳剂的分子尺寸较大, 慢弛豫过程控制界面膜性质, 吸附膜以弹性为主. 同时, 柔性聚氧乙烯链和聚氧丙烯链对界面膜性质的影响较大, 随着支链化程度增大, 界面分子间相互作用增强, 界面膜弹性增强, 黏性降低.     

Unquenched Effects and Quark Mass Dependence of Lattice Gluon Propagator in Infrared Region

In this paper, the gluon propagator in Landau gauge has been studied on a lattice, including the quenched and the unquenched one. The small geometry size of lattice we use is 16³×32, and the big one is 20³×64. For the quenched approximation, we fit the numerical results and give a little different fitting values. We also obtain unquenched effects by comparing the gluon propagator resulting from the quenched and unquenched configurations, for both the two-flavor and three-flavor cases. For the unquenched configurations, an obvious quark mass dependence has not been found in the small quark mass case, but is found in the three-flavor case when the quark mass is big.     

Thermal self‐initiation of styrene in the presence of TEMPO radicals: Bulk and miniemulsion

In TEMPO (2,2,6,6,‐tetramethyl‐1‐piperidinyloxy) controlled styrene radical polymerizations, the thermal self‐initiation reaction of styrene monomer is one of the main sources for the deviations from ideal living polymerization. However, it is also important because it continuously generates radicals to compensate for the loss of radicals caused by the termination reactions and thereby maintains a reasonable reaction rate. In this report, different initial TEMPO concentrations were used in styrene miniemulsion polymerizations without any added initiator. The consumption rate of TEMPO or radical generation rate was calculated from the length of the induction period and the increasing total number of polymer chains. It was found that there is little difference between the miniemulsions and the corresponding bulk systems in terms of the length of the induction period, which increases linearly with initial TEMPO concentration. After the induction period, the consumption rate of TEMPO or radical generation rate was reduced to a lower level, and a faster initial polymerization rate was found in the bulk system compared to the corresponding miniemulsion system. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4921–4932, 2004     

Study on cooling process of cryogenic system for superconducting magnets of BEPCⅡ

In the upgrade project of the Beijing Electron Positron Collider(BEPCⅡ),three superconducting magnets are employed to realize the goal of two orders of magnitude higher luminosity.A cryogenic system with a total capacity of 0.5 kW at 4.5 K was built at the Institute of High Energy Physics(IHEP)to support the operations of these superconducting devices.For preparing the commissioning of the system,the refrigeration process Was simulated and analyrzed numerically.The numerical model Was based on the latest engineering progress and focused on the normal operation mode.The pressure and temperature profiles of the cryogenic system are achieved with the simulation.The influence of the helium mass flow rates to cool superconducting magnets on the thermodynamic parameters of their normal operation is also studied and discussed in this paper.     

Ag/Ag2MoO4/Bi2MoO6复合光催化剂的制备及其光催化性能

采用水热、化学沉积和原位光还原的方法成功制备了新型Ag/Ag₂MoO₄/Bi₂MoO₆三元复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和紫外可见漫反射光谱(UV-Vis DRS)等技术对材料的组成、形貌、光吸收特性和光电化学性能等进行系统分析。以四环素为目标污染物,研究Ag/Ag₂MoO₄/Bi₂MoO₆在可见光下的光催化性能。研究结果表明,相比于纯Ag₂MoO₄和Bi₂MoO₆,Ag的表面等离子体共振(SPR)效应显著拓宽了催化体系对可见光的吸收能力及响应范围。当Ag₂MoO₄理论负载量(质量分数)为24.6%时,Ag/Ag₂MoO₄/Bi₂MoO₆复合材料在20 min内可将四环素完全降解,且5次循环使用后仍保持较高的催化活性,表现出良好的循环稳定性。     

多孔超薄g-C3N4纳米片负载Pt复合材料的制备及其光催化性能

以三聚氰胺为前驱体,通过热氧化刻蚀法制备多孔超薄g-C₃N₄纳米片（CNHS）,将其与氯铂酸钾溶液混合后采用原位光化学还原法成功制备了CNHS负载Pt光催化剂（Pt-CNHS）。使用粉末X射线衍射、场发射扫描电子显微镜、X射线光电子能谱、透射电子显微镜、紫外可见漫反射光谱和N₂吸附-脱附测试等技术对所制备样品的结构、形貌、光吸收特性、光电化学性能和比表面积等进行系统分析。并以气相甲苯为目标降解物,研究其光催化性能。结果表明,相对于体相g-C₃N₄（CNB）和CNHS,Pt的引入可以有效增强催化剂对可见光的吸收能力、响应范围及载流子分离效率。与纯g-C₃N₄和CNHS相比,Pt-CNHS在紫外和可见光照射下均表现出更高的光催化降解气相甲苯的活性。此外,也对Pt-CNHS光催化剂在可见光照射下降解气相甲苯的反应历程做了初步研究。     

Mie-Griineisen状态方程下多介质守恒型欧拉方程组的数值计算

针对Mie-Grüneisen状态方程下的多介质流场,将Euler方程中的部分复杂参数作为守恒量引入到新的方程中,使原方程结构得到简化.同时引入质量分数以表示流场中不同介质的变化,并对通量作近似处理,再利用MUSCL-TVD格式结合改进过的Euler方程进行求解,模拟Mie-Grüneisen状态方程下多介质相互作用的...     

有机溶剂/缓冲液双相体系中绿豆环氧化物水解酶催化环氧苯乙烯不对称水解反应

研究了有机溶剂/缓冲液双相体系中绿豆环氧化物水解酶高立体选择性地催化外消旋环氧苯乙烯水解生成(R)-苯基乙二醇反应.结果表明,与单水相反应体系相比,有机溶剂/缓冲液双相反应体系不仅有效地抑制环氧苯乙烯的非酶水解反应,而且明显提高底物的浓度,产物的收率和ee值更高.在所考察的不同有机溶剂中,正己烷不仅能较好地溶解底物,而...