Microwave-assisted extraction followed by headspace solid-phase microextraction and gas chromatography with mass spectrometry detection (MAE-HSSPME-GC-MS/MS) for determination of polybrominated compounds in aquaculture samples

This paper describes the first validated method for the extraction, purification and determination of trace levels of a number of pollutants of growing concern, including polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs), in aquaculture feeds and products. The new procedure comprises microwave-assisted extraction (MAE; optimized, using a central composite experimental design, to 15 min at 85 °C in 14 mL of 1:1 hexane/dichloromethane), and concentration by headspace solid-phase microextraction (HSSPME), and separation/quantification by gas chromatography with mass spectrometry detection (GC-MS/MS). The method was validated on the reference materials IAEA-406 and WMF-01. Limits of detection for fourteen of the fifteen analytes considered range from 10 to 600 pg g⁻¹, and limits of quantification from 50 pg g⁻¹ to 1.9 ng g⁻¹. Linear ranges, accuracies and precisions are reported.     

The enantiomeric scaffold approach to highly functionalized 1-oxadecalines: enantio- and regiocontrolled [4 + 2] cycloadditions of 5-alkenyl-eta3-pyranylmolybdenum complexes

TpMo(CO)2(5-alkenyl-eta-2,3,4-pyranyl) diene complexes function as excellent chiral scaffolds for the efficient regio- and enantiocontrolled synthesis of highly functionalized 1-oxadecaline derivatives through a novel transition metal-mediated Diels-Alder reaction. Very good to excellent yields and excellent levels of endo selectivity are obtained, and the reaction gives products with complete retention of enantiomeric purity when carried out with chiral, nonracemic scaffolds. A subtle structural modification on the diene (replacement of an H by a trans-CH3 group) leads to a complete change of regiochemistry, which is discussed from a mechanistic point of view. The role of the eta3-coordinated TpMo(CO)2 moiety is also critical to the further functionalization of the [4 + 2] cycloadducts, as illustrated by the preparation of 20 variously functionalized 1-oxadecaline derivatives (>98% ee when carried out with high enantiopurity scaffolds).     

The Interplay between Steric and Electronic Effects in SN2 Reactions

Myths of steric hindrance : In contrast with current opinion, energy decomposition analysis shows that the presence of bulky substituents at carbon leads to the release of steric repulsion in the transition state shown in the graphic. It is rather the weakening of the electrostatic attraction, and in particular the loss of attractive orbital interactions, that are responsible for the activation barrier.

     

Sensing Abilities of Crown Ether Functionalized Polythiophenes

Tuning sensing abilities! The affinity of three different [15]crown‐5 ether functionalized polythiophenes for alkali ions has been explored (see figure). Ab initio and DFT quantum mechanical calculations show that the binding energy between neutral conducting polymers and metallic ions, which interact attractively, decreases as the size of the ion increases. Oxidation of these polythiophene derivatives significantly reduces their affinity towards alkali ions, becoming low or even nonexistent.

     

Stable N-heterocyclic carbene (NHC)-palladium(0) complexes as active catalysts for olefin cyclopropanation reactions with ethyl diazoacetate

The Pd(0) complexes [(NHC)PdL(n)] (NHC=N-heterocyclic carbene ligand; L=styrene for n=2 or PR(3) for n=1) efficiently catalyse olefin cyclopropanation by using ethyl diazoacetate (EDA) as the carbene source with activities that improve on previously described catalytic systems based on this metal. Mechanistic studies have shown that all of these catalyst precursors deliver the same catalytic species in solution, that is, [(IPr)Pd(sty)], a 14e(-) unsaturated intermediate that further reacts with EDA to afford [(IPr)Pd(=CHCO(2)Et)(sty)], from which the cyclopropane is formed.     

Formation of self-assembled chains of tetrathiafulvalene on a Cu(100) surface

Formation of self-assembled chains of tetrathiafulvalene (TTF) on the Cu(100) surface has been investigated by scanning tunneling microscopy and density functional theory calculations that include semiempirical van der Waals (vdW) interaction corrections. The calculations show that the chain structures observed in the experiments can only be explained by including the vdW interactions. The molecules are tilted along the chain in order to achieve maximal intermolecular interaction. The chains are metastable on the surface, which is consistent with the experimental observation that they disappear after annealing. The fact that all TTF chains observed in the experiment are short might be possibly explained by the interplay between the stabilizing vdW molecule-molecule interaction and the destabilizing rearrangement of surface atoms due to the strong molecule-substrate interaction.     

Overcoming matrix effects using the dilution approach in multiresidue methods for fruits and vegetables

During recent years matrix effects in liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) have quickly become a major concern in food analysis. The phenomenon of ion suppression can lead to errors in the quantification of the analytes of interest, as well as can affect detection capability, precision, and accuracy of the method. Sample dilution is an easy and effective method to reduce interfering compounds, and so, to diminish matrix effects. In this work, matrix effects of 53 pesticides in three different matrices (orange, tomato and leek) were evaluated. Several dilutions of the matrix were tested in order to study the evolution of signal suppression. Dilution of the extracts led to a reduction of the signal suppression in most of the cases. A dilution factor of 15 demonstrated to be enough to eliminate most of the matrix effects, opening the possibility to perform quantification with solvent based standards in the majority of the cases. In those cases where signal suppression could not be reduced, a possible solution would be to use stable isotope-labelled internal standards for quantification of the problematic pesticides.     

Determination of neomycin and oxytetracycline in the presence of their impurities in veterinary dosage forms by high-performance liquid chromatography/tandem mass spectrometry

Two HPLC/MS/MS methods, one for determination of neomycin sulfate and the other for determination of oxytetracycline hydrochloride in the presence of their impurities, were developed and validated. Separations were achieved with gradient elution on a C18 column. All components were ionized by positive-ion electrospray and detected by multiple reaction monitoring. Calibration curves were linear, with correlation coefficients >0.99. Precision of the methods was confirmed by RSD values of 0.34 and 0.71% for neomycin and oxytetracycline, respectively. Recovery values of 101.5 and 101.0%, respectively, indicated adequate accuracy. Analysis time for neomycin was 24 min, with the retention time of the main compound at 10.1 min; for oxytetracycline, the analysis time was 18 min, with the main peak at 9.95 min. Longer retention times than expected were a consequence of the necessity of chromatographic separation of isomers with the same ion transition. All impurities defined in the pharmacopoeias were determined and their identities confirmed. The methods were tested for QC of veterinary dosage forms (commercial powders and injections containing these antibiotics).     

CH···π interactions do not contribute to hydrogen transfer catalysis by glycerol dehydratase

The role of the nonbonded CH···π interaction in the hydrogen abstraction from glycerol by the coenzyme B(12)-independent glycerol dehydratase (GDH) was examined using the QM/MM (ONIOM), MP2, and CCSD(T) methods. The studied CH···π interaction included the hydrogen atom of the -C(2)H(OH)- group of the glycerol substrate and the tyrosine-339 residue of the dehydratase. A contribution of this interaction to the stabilization of the transition state for the transfer of a hydrogen atom from the adjacent terminal C(1)H(2)(OH) group to cysteine 433 was determined by ab initio HF, MP2, and CCSD(T) calculations with the aug-cc-pvDZ basis set for the corresponding methane/benzene, methanol/phenol, and glycerol radical/phenol subsystems. The calculated CH···π distance, defined as the distance between the H atom and the center of the phenol ring, shortened from 2.62 to 2.52 ? upon going from the ground- to the transition-state of the GDH-catalyzed reaction. However, this shortening was not accompanied by the expected lowering of the CH···π interaction free energy. Instead, this interaction remained weak (about -1 kcal/mol) along the entire reaction coordinate. Additionally, the mutual orientation of the CH group and the phenol ring did not change significantly during the reaction. These results suggest that the phenol group of the tyrosine-339 does not contribute to lowering the activation barrier in the enzyme, but do not exclude the possibility that tyrosine 339 facilitates proper orientation of glycerol for the electrostatic catalysis, or inhibits side-reactions of the reactive glycerol radical intermediate.     

Tuning the spin-transition properties of pyrene-decorated 2,6-bispyrazolylpyridine based Fe(II) complexes

Two 2,6-bispyrazolylpyridine ligands (bpp) were functionalized with pyrene moieties through linkers of different lengths. In the ligand 2,6-di(1H-pyrazol-1-yl)-4-(pyren-1-yl)pyridine (L1) the pyrene group is directly connected to the bpp moiety via a C-C single bond, while in the ligand 4-(2,6-di(1H-pyrazol-1-yl)pyridin-4-yl)benzyl-4-(pyren-1-yl)butanoate (L2) it is separated by a benzyl ester group involving a flexible butanoic chain. Subsequent complexation of Fe(II) salts revealed dramatic the influence of the nature of the pyrene substitution on the spin-transition behaviour of the resulting complexes. Thus, compound [Fe(L1)(2)](ClO(4))(2) (1) is blocked in its high spin state due to constraints caused by a strong intermolecular π-π stacking in its structure. On the other hand, the flexible chain of ligand L2 in compounds [Fe(L2)(2)](ClO(4))(2) (2) and [Fe(L2)(2)](BF(4))(2)·CH(3)CN·H(2)O (3) prevents structural constraints allowing for reversible spin transitions. Temperature-dependent studies of the photophysical properties of compound 3 do not reveal any obvious correlation between the fluorescence of the pyrene group and the spin state of the spin transition core.