Synthesis and structure of diamido ether uranium(IV) and thorium(IV) halide "ate" complexes and their conversion to salt-free bis(alkyl) complexes

The high-yield synthesis, spectroscopic and structural determination of three new uranium(IV) and thorium(IV)ate complexes supported by three different diamido ether ligands are reported. The reaction of Li2[2,6-iPr2PhN(CH2CH2)]2O (Li2[DIPPNCOCN]) with 1 equiv. of UCl4 in THF generates [DIPPNCOCN]UCl3Li(THF)2(1), while reaction in toluene/ether gives salt-free [DIPPNCOCN]UCl2.1/2C7H8(2), which was identified by paramagnetically shifted 1H NMR. Reaction of 0.5 equiv. of {[tBuNON]UCl2}2([tBuNON]=[(CH3)3CN(Si(CH3)2)]2O2-) with 3.5 equiv. LiI in toluene and a minimal amount of THF results in [tBuNON]UI3Li(THF)2(3) and is very similar in structure to 1. {[MesNON]ThCl3Li(THF)}2(4), a dimeric complex with a Th2Li2Cl6 core, is prepared by reaction of Li2[2,4,6-Me3PhN(Si(CH3)2)]2O (Li2[MesNON]) with ThCl4 in THF. The analogous reaction in toluene did not yield the salt-free complex but rather a sterically crowded diligated compound, [MesNON]2Th (5), which was also structurally characterized. Complex 5 was prepared rationally by reacting 2 equiv. Li2[MesNON] with ThCl4 in toluene. The reaction of 1 and 3 with 2 equiv. of LiCH2Si(CH3)3 generates the stable, salt-free organoactinides [DIPPNCOCN]U(CH2Si(CH3)3)2(6) and [tBuNON]U(CH2Si(CH3)3)2(7). Complex 6 was structurally characterized. These reactions illustrate the viability of ate complexes as useful synthetic precursors.     

Ligand discrimination in the reaction of nitrones with [PtCl2(PhCN)2]. Selective formation of mono-oxadiazoline and mixed bis-oxadiazoline complexes under thermal and microwave conditions

[2+3] Cycloaddition of nitrones to the nitrile ligands in the complexes cis- or trans-[PtCl2(PhCN)2] occurs under ligand differentiation and allows for selective synthesis of complexes of the type cis- or trans-[PtCl2(oxadiazoline)(PhCN)]. Microwave irradiation enhances the reaction rates of the cycloaddition considerably and further favours the selectivity towards the mono-cycloadduct with respect to thermal conditions, because the first cycloaddition is accelerated to a higher extent than the second one. Reaction of the trans-substituted mono-oxadiazoline complexes with a nitrone different from the one used for the first cycloaddition step gives access to mixed bis-oxadiazoline compounds of the composition trans-[PtCl2(oxadiazoline-a)(oxadiazoline-b)]. The corresponding cis-configured complexes, however, do not undergo further cycloaddition. All reactions described occur without isomerisation of the stereochemistry around the platinum center, independently of whether thermal or microwave heating is applied.     

Design and Enantioselective Synthesis of Cashmeran Odorants by Using “Enol Catalysis”

Novel Cashmeran odorants were designed by molecular modeling. Their short syntheses involve a novel asymmetric Brønsted acid catalyzed Michael addition of unactivated α‐substituted ketones. This key transformation was realized by utilizing a new type of enol activation catalysis and affords different cyclic ketones bearing α‐quaternary stereocenters in good to excellent yields and with high enantioselectivity. Subsequent McMurry coupling and Saegusa–Ito oxidation furnished the enantiopure target odorants, one enantiomer of which indeed possesses the typical olfactory aspects of Cashmeran.     

Two 2,6‐Dioxabicyclo[3.3.1]nonan‐3‐ones from Phragmanthera capitata (Spreng.) Balle (Loranthaceae)

Phytochemical investigation of the leaves of Phragmanthera capitata collected on Cassia spectabilis tree led to the isolation of two natural lactones, rel‐(1R,5S,7S)‐7‐[2‐(4‐hydroxyphenyl)ethyl]‐2,6‐dioxabicyclo[3.3.1]nonan‐3‐one ( 1 ) and 4‐{2‐[rel‐(1R,3R,5S)‐7‐oxo‐2,6‐dioxabicyclo[3.3.1]non‐3‐yl]ethyl}phenyl 3,4,5‐trihydroxybenzoate ( 2 ) together with the known compounds betulinic acid ( 3 ), dodoneine ( 4 ), quercetin 3‐O‐α‐L ‐rhamnopyranoside ( 5 ), quercetin 3‐O‐α‐L ‐arabinofuranoside ( 6 ), quercetin ( 7 ), betulin ( 8 ), lupeol ( 9 ), and sitosterol ( 10 ). Their structures were established by means of modern spectroscopic techniques, and the relative configuration of compound 1 was confirmed by X‐ray analysis. Compounds 1 and 2 were tested in vitro for their antiplasmodial activity against the Plasmodium falciparum chloroquine sensitive‐strains NF54 and 3D7. Compound 2 exhibited good antiplasmodial activity against both strains with IC₅₀ of 2.4 and 4.9 μM , respectively, while compound 1 was inactive.     

Determination of 90Sr and 210Pb in deer bone samples by liquid scintillation counting after ion-exchange procedures

This work describes a procedure for the isolation of ⁹⁰Sr and ²¹⁰Pb from deer bones by anion exchange methods and their sequential measurement by LSC. To prevent collection of Pb on the Sr·Spec^® resin we first separated Pb on a Dowex anion exchange column. Sr, which is not held back on the Dowex column, was then purified using Sr·Spec^® resin: first Ca and the Ra isotopes were eluted with 3 M HNO₃ and then Sr was eluted with distilled water. With this 2-steps procedure pure ²¹⁰Pb and ⁹⁰Sr spectra can be achieved. The chemical yield of both steps was determined by ICP-MS. Our ⁹⁰Sr results show satisfying agreement with data obtained by a shorter Sr·Spec^® method and also by the “classical” ⁹⁰Sr determination using fuming nitric acid. Also ²¹⁰Pb results were checked by re-measuring bone samples with already known ²¹⁰Pb activities. Further our method was verified on the reference sample IAEA-A-12.     

Laccase–polyazetidine prepolymer–MWCNT integrated system: Biochemical properties and application to analytical determinations in real samples

Bioelectrochemical properties of Trametes versicolor Laccase (TvL) and Trametes hirsuta Laccase (ThL) immobilized by using polyazetidine prepolymer (PAP) onto multi-walled carbon nanotubes (MWCNTs) screen printed electrode (SPE) surface, have been studied with several redox mediators by cyclic voltammetry (CV). The efficient entrapment of laccase in the PAP layer was confirmed by determination of both kinetic parameters (maximum current and Michaelis–Menten apparent constant) and analytical performances by chronoamperometry. The Laccase-modified MWCNTs electrode provides an effective biosensor for determination of polyphenols and catecholamines in real matrices; performances of the considered biosensors for real samples analysis are also compared and discussed.     

Amorphous cobalt silicate nanobelts@carbon composites as a stable anode material for lithium ion batteries

During the past decade, tremendous attention has been given to the development of new electrode materials with high capacity to meet the requirements of electrode materials with high energy density in lithium ion batteries. Very recently, cobalt silicate has been proposed as a new type of high capacity anode material for lithium ion batteries. However, the bulky cobalt silicate demonstrates limited electrochemical performance. Nanostructure engineering and carbon coating represent two promising strategies to improve the electrochemical performance of electrode materials. Herein, we developed a template method for the synthesis of amorphous cobalt silicate nanobelts which can be coated with carbon through the deposition and thermal decomposition of phenol formaldehyde resin. Tested as an anode material, the amorphous cobalt silicate nanobelts@carbon composites exhibit a reversible high capacity of 745 mA h g^–1 at a current density of 100 mA g^–1, and a long life span of up to 1000 cycles with a stable capacity retention of 480 mA h g^–1 at a current density of 500 mA g^–1. The outstanding electrochemical performance of the composites indicates their high potential as an anode material for lithium ion batteries. The results here are expected to stimulate further research into transition metal silicate nanostructures for lithium ion battery applications.     

SIMS Analysis of Uranium and Actinides in Microparticles of Different Origin

In the framework of the projects Environmental Sampling and High Performance Trace Analysis in support to the International Atomic Energy Agency (IAEA) and the Euratom Safeguards Office (ESO), the research has been focused on the identification and characterisation of particles of interest containing mainly U and other actinides.Multiple analyses, elemental and isotopic, of single radioactive particles in the µm-size range are key-tools in environmental research and in nuclear forensics. The main purpose in the analysis of single particles by SIMS is the determination of their isotopic composition that has been demonstrated successfully for uranium and plutonium particles. From these results, the enrichment of the material produced, the process used for the enrichment as well as the starting material employed (natural or reprocessed uranium) can be identified.     

Thermoresponsive hydrogels from symmetrical triblock copolymers poly(styrene-block-(methoxy diethylene glycol acrylate)-block-styrene)

A series of symmetrical, thermo-responsive triblock copolymers was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and studied in aqueous solution with respect to their ability to form hydrogels. Triblock copolymers were composed of two identical, permanently hydrophobic outer blocks, made of low molar mass polystyrene, and of a hydrophilic inner block of variable length, consisting of poly(methoxy diethylene glycol acrylate) PMDEGA. The polymers exhibited a LCST-type phase transition in the range of 20-40 °C, which markedly depended on molar mass and concentration. Accordingly, the triblock copolymers behaved as amphiphiles at low temperatures, but became water-insoluble at high temperatures. The temperature dependent self-assembly of the amphiphilic block copolymers in aqueous solution was studied by turbidimetry and rheology at concentrations up to 30 wt %, to elucidate the impact of the inner thermoresponsive block on the gel properties. Additionally, small-angle X-ray scattering (SAXS) was performed to access the structural changes in the gel with temperature. For all polymers a gel phase was obtained at low temperatures, which underwent a gel-sol transition at intermediate temperatures, well below the cloud point where phase separation occurred. With increasing length of the PMDEGA inner block, the gel-sol transition shifts to markedly lower concentrations, as well as to higher transition temperatures. For the longest PMDEGA block studied (DP(n) about 450), gels had already formed at 3.5 wt % at low temperatures. The gel-sol transition of the hydrogels and the LCST-type phase transition of the hydrophilic inner block were found to be independent of each other.     

The chemistry of (1-azabuta-1,3-diene)tricarbonyliron(0) complexes

In this review, an overview of synthetic and structural aspects of 1-azabuta-1,3-diene complexes of iron is given and the reactivity of these complexes is discussed with regard to inorganic, organometallic, organic and stereochemical aspects of their chemistry. Their application in the synthesis of organic and organometallic target compounds, or as transfer reagents of the tricarbonlyiron(0) moiety is demonstrated.