Hexadecapolar Kondo effect in URu2Si2?

We derive the coupling of a localized hexadecapolar mode to conduction electrons in tetragonal symmetry. The derivation can be easily adapted to arbitrary multipoles in an arbitrary environment. We relate our model to the two-channel Kondo (2CK) model and show that for an f(2) configuration a relevant crystal field splitting in addition to the 2CK interaction is intrinsic to tetragonal symmetry. We discuss possible realizations of a hexadecapolar Kondo effect in URu(2)Si(2). Solving our model we find good agreement with susceptibility and specific heat measurements in Th(1-x)U(x)Ru(2)Si(2) (x?1).     

Investigation of fill factor losses on 20.2% efficient n‐type mono‐like silicon solar cells with laser contact opening

Large area (243.36 cm²) back‐junction passivated emitter, rear totally diffused (PERT) solar cells with laser contact opening (LCO) on n‐type mono‐like crystalline Si with efficiencies of 20.2% are presented. Boron emitters with high electrical quality (implied open circuit voltage iV_OC up to 700 mV) are formed during a co‐diffusion step using SiO_x:B layers. Increasing the rear metal contact coverage, we observed a decrease in fill factor (FF) instead of the expected increase due to the decrease of the back side series resistance. We show that it can be attributed to recombination centers (RCs) in the space charge region underneath the contact spots inducing an increasing second diode contribution. The presented empirical model for the RCs implemented in Synopsys Sentaurus TCAD allows for a successful reproduction of the FF, pseudo FF and V_OC behaviour with contact coverage. According to this model, the RCs induced by laser ablation and subsequently evaporation of Al have a shallow exponential distribution with a characteristic length of L_T = 0.2 µm and an effective surface density of N *_T0 = 25 cm^–1. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Highly confined hybrid spoof surface plasmons in ultrathin metal-dielectric heterostructures

Highly confined "spoof" surface plasmons (SSPs) are theoretically predicted to exist in a perforated metal film coated with a thin dielectric layer. Strong modes confinement results from the additional waveguiding by the layer. Spectral characteristics, field distribution, and lifetime of these SSPs are tunable by the holes' size and shape. SSPs exist both above and below the light line, offering two classes of applications: "perfect" far-field absorption and efficient emission into guided modes. It is experimentally shown that these plasmonlike modes can turn thin, weakly absorbing semiconductor films into perfect absorbers.     

Real time inverse filter focusing through iterative time reversal

In order to achieve an optimal focusing through heterogeneous media we need to build the inverse filter of the propagation operator. Time reversal is an easy and robust way to achieve such an inverse filter in nondissipative media. However, as soon as losses appear in the medium, time reversal is not equivalent to the inverse filter anymore. Consequently, it does not produce the optimal focusing and beam degradations may appear. In such cases, we showed in previous works that the optimal focusing can be recovered by using the so-called spatiotemporal inverse filter technique. This process requires the presence of a complete set of receivers inside the medium. It allows one to reach the optimal focusing even in extreme situations such as ultrasonic focusing through human skull or audible sound focusing in strongly reverberant rooms. But, this technique is time consuming and implied fastidious numerical calculations. In this paper we propose a new way to process this inverse filter focusing technique in real time and without any calculation. The new process is based on iterative time reversal process. Contrary to the classical inverse filter technique, this iteration does not require any computation and achieves the inverse filter in an experimental way using wave propagation instead of computational power. The convergence from time reversal to inverse filter during the iterative process is theoretically explained. Finally, the feasibility of this iterative technique is experimentally demonstrated for ultrasound applications.     

Distortion-free single point imaging of multi-layered composite sandwich panel structures

The results of a magnetic resonance imaging (MRI) investigation concerning the effects of an aluminum honeycomb sandwich panel on the B1 and B0 fields and on subsequent image quality are presented. Although the sandwich panel structure, representative of an aircraft composite material, distorts B0 and attenuates B1, distortion-free imaging is possible using single point (constant time) imaging techniques. A new expression is derived for the error caused by gradient field distortion due to the heterogeneous magnetic susceptibility within a sample and this error is shown not to cause geometric distortion in the image. The origin of the B0 distortion in the sample under investigation was also examined. The graphite-epoxy 'skin' of the panel is the principal source of the B0 distortion. Successful imaging of these structures sets the stage for the development of methods for detecting moisture ingress and degradation within composite sandwich structures.     

Monolithic carrier-envelope phase-stabilization scheme

A new scheme for stabilizing the carrier-envelope (CE) phase of a few-cycle laser pulse train is demonstrated. Self-phase modulation and difference-frequency generation in a single periodically poled lithium niobate crystal that transmits the main laser beam allows CE phase locking directly in the usable output. The monolithic scheme obviates the need for splitting off a fraction of the laser output for CE phase control, coupling into microstructured fiber, and separation and recombination of spectral components. As a consequence, the output yields 6-fs, 800-nm pulses with an unprecedented degree of short- and long-term reproducibility of the electric field waveform.     

Hilbert phase microscopy for investigating fast dynamics in transparent systems

We introduce Hilbert phase microscopy (HPM) as a novel optical technique for measuring high transverse resolution quantitative phase images associated with optically transparent objects. Because of its single-shot nature, HPM is suitable for investigating rapid phenomena that take place in transparent structures such as biological cells. The potential of this technique for studying biological systems is demonstrated with measurements of red blood cells, and its ability to quantify dynamic processes on a millisecond scale is exemplified with measurements of evaporating micrometer-sized water droplets.     

Charge transfer from ammonia physisorbed on nanotubes

We report the use of nanotube field-effect transistor devices for chemical sensing in a conducting liquid environment. Detection of ammonia occurs through the shift of the gate voltage dependence of the source-drain current. We attribute this shift to charge transfer from adsorbed ammonia molecules, with the amount of charge estimated to be as small as 40 electrons for the smallest shift detected. Using the concentration dependence of the response as an adsorption isotherm, we are able to measure the amount of charge transfer to be 0.04 electron per ammonia molecule.     

Magnetic properties and macroscopic heterogeneity of FeCoNbB Hitperms

Nanocrystalline ribbons of Fe_81−xCo_xNb₇B₁₂ (where x ranges from 0 to 40.5 at%) Hitperm alloys have been investigated as to their basic magnetic properties and the influence of the macroscopic heterogeneity. Different crystalline share at surfaces compared with the volume average is observed by conversion electron Mössbauer spectroscopy (CEMS) and Mössbauer spectroscopy (MS), respectively. This marks the presence of macroscopic heterogeneity in these Hitperms. The heterogeneity is generally more significant in Ar-annealed samples than in the vacuum-annealed ones. The characteristic slant hysteresis loops (hard-ribbon-axis) are seen as a rule with few exceptions. An inspection of hysteresis loop response of resin potted samples shows that the surfaces bi-axially squeeze the ribbon interior in heterogeneous Hitperms when the ribbons cool down after annealing. Certain compositions show macroscopic viscous flow prior to crystallization so the heterogeneity gets another chance to induce anisotropy during annealing. The induction attains 1.5 T but saturates poorly due to the heterogeneity and the ensuing anisotropy. Moreover the heterogeneity appears to hamper the crystallization within the ribbon interior. Unlike Finemets, the density of these Hitperms show no pronounced trend with annealing.     

Measuring the complete transverse spatial mode spectrum of a wave field

We put forward a method that allows the experimental determination of the entire spatial mode spectrum of any arbitrary monochromatic wave field in a plane normal to its propagation direction. For coherent optical fields, our spatial spectrum analyzer can be implemented with a small number of benchmark refractive elements embedded in a single Mach-Zehnder interferometer. We detail an efficient setup for measuring in the Hermite-Gaussian mode basis. Our scheme should also be feasible in the context of atom optics for analyzing the spatial profiles of macroscopic matter waves.