Structural behaviour of fibre metal laminates subjected to a low velocity impact

Structural impact tests were first presented to cover typical fibre metal laminates (FMLs) subjected a low velocity projectile impact,which produced the corresponding load-displacement traces and deformation/failure modes for the validation of numerical models.Finite element (FE) models were then developed to simulate the impact behaviour of FMLs tested.The aluminium (alloy grade 2024-0) layer was modelled as an isotropic elasto-plastic material up to the on-set of post failure stage,followed by shear failu...     

基于DSP的高功率TEACO2激光器控制系统的高精度数据采集

针对基于DSP的高功率TEA CO2激光器控制系统直接利用DSP F2812内置A/D转换器（ADC）进行模拟量采样时存在转换误差较大,且模拟量易受电磁干扰等问题,从硬件和软件两个角度提出了校正DSP2812内置ADC的方法。硬件上采用硬件模拟滤波和隔离等手段对输入的模拟量进行处理;软件校正则通过将两路给定的参考电压值送入DSPF2812内置A/D转换器的两个转换通道,计算出ADC的偏置误差和增益误差,以此误差对其它通道A/D转换器进行校正。最后,实验分析了参考电压和A/D采样时钟频率对A/D转换精度的影响。结果表明,提出的方法能有效地提高A/D转换器的精度,A/D转换误差达到±3 LSB,特别是在对腔压值精度要求很高的0～12 000 Pa区段,A/D转换精度达±1 LSB,可以保证TEA CO2激光器的可靠运行。     

退火温度对YBa2Fe3O8的结构与磁性质影响分析

YBa2Fe3O8(YBFO)是具有三方钙钛矿结构的反铁磁(AFM)体,研究它的结构和磁性质对于我们认识三方钙钛矿结构具有重要作用.目前,关于固相法制备YBFO中退火温度方面的研究并不多,而控制退火温度是这种工艺中的重要环节.为制备高含量的YBa2Fe3O8,本文分别在760℃、950℃和1100℃退火温度下,采用固相...     

Micromegas prototypes with thermo-bond film separators

In this paper we report the results of Micromegas prototypes constructed by attaching micromesh to an anode using thermo-bond films. The excellent metal attaching ability and good dielectical property of this kind of film make it a promising material to be used as avalanche gap spacers. Several prototypes are successfully made. The electron transmission properties are first studied and then the gas gain is measured in argon-isobutane mixtures. The maximum gain of more than 10⁴ is easily obtained. The energy resolutions for ⁵⁵Fe 5.9 keV K_α ray can be better than 20% over one magnitude in gain for different operational gas mixtures and the best energy resolution of 13.7% (FWHM) can be achieved with the gas mixture of 94% argon concentration. The preliminary test results of the prototypes with sensitive area of 45 mm×45 mm without internal support show good uniformity across the sensitive area.     

分形介质声子导热的频域问题

本文论证了分形介质中声子导热的必要条件，给出了分形介质定容比热的频域。结果表明，同一材料的分形介质定容比热恒小于均匀介质的定容比热。     

First Total Synthesis of 5_α-Hydroxy-isopterocarpolone

Sesquiterpenic compounds of the Eudesmane family have attracted considerable attention due to their intriguing biological properties1,2, particularly significant antifeedant activity, cell growth inhibitory and plant growth regulating activities.In 1996, J. Hu and co-workers3 had isolated eudesmane sesquiterpene 5?-hydroxy-isopterocarpolone 1 from the aerial parts of chinese folk medicine Artemisia eriopoda and elucidated its structure by spectropic methods. Herein, we reported the first tota…     

Quantum dynamics of dissociative adsorption of H_2 on Ni(100) using the dynamical Lie algebraic method

A dynamical Lie algebraic method has been applied to treating the quantum dynamics of dissociative adsorption of H_2 on a static flat metal surface. An LEPS potential energy surface has been used to describe the interaction of H_2 with Ni(100) surface. The dependence of the initial state-selected dissociation probability was obtained analytically on the initial kinetic energy and time. A comparison with other theoretical calculations and experiments is made. The results show that the method can be effectively used to describe the dynamics of reactive gas-surface scattering.     

(X+K)mod 2~n运算和XK运算异或差值的概率分析及其应用

对(X+K)mod 2~n运算和X⊕K运算异或差值函数的概率分布规律进行了研究,并基于穷举攻击中大概率优先选取原则,给出了一个解决(X+K)mod 2~n和X⊕K等价问题的计算复杂度为O(n)的算法,基于此对Hawkes等人针对SNOW1.0的猜测决定攻击进行了改进,使其数据量由O(2~(95))降为O(2~(90)),而计算复杂度由O(2~(224))略微提高到O(2~(224.482)).     

Two New Constituents from the Soft Coral Nephthea hainansis

Two new compounds, namely 7α, 10α-dimethyl-3β-isopropene-1, 2-ene-octahydro-naphthalene (1) and ethyl 5Z,8Z, 11Z, 14Z-nonadecatetraenoate (2) were isolated from the soft coralNephthea hainansis. Compound 1 was a pseutosesquiterpene and 2 was a polyunsaturated fattyacid ethylate. Their structures were established on the basis of spectroscopic methods.