多巴酚丁胺的流动注射化学发光法测定

在盐酸介质中 ,高锰酸钾可氧化多巴酚丁胺产生化学发光 ,甲醛对该反应有较强的增敏作用 ,据此 ,建立了流动注射化学发光法测定多巴酚丁胺的方法 ;方法的线性范围为0.1～100mg·L -1,检出限为0.07mg·L -1 ,相对标准偏差为1.2 %(n=11,ρ=1.0mg·L -1) ;该法用于药物中多巴酚丁胺含量的测定 ,结果令人满意。     

Whole-field determination of isoclinic parameter by five-step color phase shifting and its error analysis

Combining color imaging with phase shifting, a technique named five-step color phase shifting is presented to determine the whole-field isoclinic parameter. Relevant theory is derived and explicit conditions for directly determining the isoclinic parameter in the range of [0,π/2] are given. The unloaded light intensity of the model is systematically studied. A color camera recorded five isoclinic images coupled with isochromatics from a plane polariscope with five different settings, respectively. Experiments have been carried out with a circular disk under diametral compression and errors have been analyzed and estimated. This technique utilizes white light, which avoids undefined isoclinics near the locations where the isochromatics exist and will have active effect on experimental stress analysis and structural strength design.     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

单腔并行双器件功率合成理论与实验研究

本文对一种毫米波单腔并行双器件功率合成器进行了理论和实验研究。分析并计算了矩形波导腔内两只并行振荡器件的外电路阻抗,给出了一些对设计、开发该功率合成器非常有用的数值结果。在36.0GHz频率附近,单腔并行双Gunn器件功率合成器的实验结果为:合成输出功率约400mW,合成效率高于95.5％,大于100mW输出的机械调谐带宽近1.5GHz。     

First observation of yrast band in odd-odd162Lu

High spin states of the odd-odd¹⁶²Lu nucleus have been studied via¹⁴⁷Sm(¹⁹F,4nγ)¹⁶²Lu reaction at 95 MeV beam energy. Level scheme for yrast band based onπ[h_11/2 v[i_13/2] quasiparticle configuration was established up to I ^π = (23^?) for the first time. This band shows the signature inversion in energy before backbending generally appeared in this mass region. It is stressed that the signature splitting in¹⁶²Lu is larger than that in the¹⁶⁰Tm nucleus.     

CsBr高压X光研究

 采用同步辐射X光源和能散法，对CsBr粉末样品进行高压原位X光衍射实验。由金刚石对顶压砧高压装置（DAC）产生高压，用已知状态方程的Pt粉末作内标，由Pt的衍射数据确定样品压力，最高压力达64.4 GPa。实验结果表明：室温常压下原始CsBr样品是具有简单立方结构的晶体，其晶格常数α＝0.428 5 nm。高压下CsBr的结构有所变化，在51.3~58.4 GPa的压力范围内，(110)线和(211)线发生劈裂，从而形成了四方相。     

注入控制铜蒸气激光方向性时间过程测量

实验研究了注入控制对铜蒸气激光非稳腔输出光束质量的影响，从输出光发散角时间分辨过程的测量结果说明注入加速被注入腔内激光发散角的减小过程。由于被注入腔内放大自发辐射的存在，为得到较好的注入控制效果，注入光的脉宽和进入被注入腔的延时必须恰当。     

离焦散斑技术研究Kirchhoff板在动载作用期的弯曲

本文使用动态离焦散斑技术,测试板的动态弯曲获得成功。并推导了Kirchhoff板动态变形的有关分析,提出了由最大斜率确定材料常数的思想。显然,这是同离焦散斑方法所测数据直接相关的处理手法。