热处理对聚乙烯／炭黑导电复合体系形态结构及PTC特性的影响

借助ＷＡＸＤ、ＳＡＸＤ和ＤＳＣ等手段研究了炭黑与聚乙烯复合体系在不同热处理条件下的结晶行为及聚集态结构的大尺寸效应对ＰＴＣ特性的影响。由此提出，不仅结晶度大小，而且聚集大尺寸效应性能对ＰＴＣ行性有重要影响的新观点。     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

臭氧与二乙胺和三乙胺气相反应的速率常数

利用自制的烟雾箱系统研究了臭氧与二乙胺和三乙胺的气相反应动力学. 实验过程中保证二乙胺和三乙胺浓度远远大于臭氧浓度, 使得实验在准一级条件下进行. 加入环己烷以消除实验过程中可能产生的OH自由基对反应的影响. 在(298±1) K和1.01×105 Pa条件下, 测得臭氧与二乙胺和三乙胺反应的绝对速率常数值分别为(1.33±0.15)×10^-17和(8.20±1.01)×10^-17 cm³·molecule^-1·s^-1. 与文献中已有的其它胺类的臭氧反应数据比较后发现, 臭氧与胺的反应可以用亲电反应机制来解释. 另外, 通过对比发现, 臭氧与三取代的烷基胺类的反应速率要远远大于其与二取代的烷基胺类的反应速率. 这在一定程度上可有助于解释外场观测到的气溶胶相中二烷基胺盐较多的事实. 利用测得的速率常数和大气中臭氧浓度, 还估算了二乙胺和三乙胺与臭氧反应的大气寿命. 结果显示, 与臭氧的反应是二乙胺和三乙胺在大气中的一种重要的消除途径, 尤其是在污染严重地区.     

A Novel Dimeric Coumarin from Clausena lenis

A novel dimeric coumarin (1), a dimeric of seselin named diseselin A, was isolated from the aerial part of Clausena lenis. The structure was elucidated based on the MS, 1D and 2D NMR data.     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

N,N-二(2-苯并咪唑亚甲基)甲胺高氯酸盐的晶体和电子结构

合成了三齿配体N,N-二(2-苯并咪唑亚甲基)甲胺(MN3)的高氯酸盐.对该化合物进行了元素分析、紫外和红外表征;采用X射线衍射方法测定了该化合物的晶体结构,依据晶体结构数据使用G98程序对配体(MN3)进行了量子化学计算.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.     

Morphological and Structural Studies of sPS/aPS Blends

Inrecentyears,thenewsedricrystallinepolymersyndiotacticp0lystyrene(sPS)hasat-ITactedmuchattentionduetoitsg0odchendcalresistanceandenhancedmechanicalperformanceatelevatedtemPeratUre.'H0wever,itexhibitshighbrittlenessandpoorimPact-resistanceandtCar-resistance.2Therefore,itisnecessarytomodifyitwithtougheningpolyIners.AsimPlemeth0dto0verc0methedriscibilityofatwo-phaseblendofsPSandatougheningpolymristotwrovetheinterfacialaffmity,wheretheadditionofablockcoP0lymerisconsideredtobemosteffective.3…     

Determinations of combustion and formation enthalpies of C60 and C70

By using a micro-bomb calorimeter, the standard enthalpies of combustion of C₆₀ and C₇₀ have been determined to be - (25 947.1±8.5) and - (29 956.1 ± 8.9) kJ/mol respectively. A g. 1. c. analysis indicated that the amounts of residual organic solvents in the samples were very small, and their effects on the final results were negligible. The energy of combustion ofC60 determined in this work is in agreement in the uncertainty interval with that determined by means of traditional calorimeter using macro amount of sample. The enthalpies of formation of these two substances have been derived. The strain energies in the molecules of C₆₀ and C₇₀ were estimated by a bond energy scheme and by using corannulene as the model compound, the results estimated from different methods are very close. Project supported by the National Natural Science Foundation of China (Grant No. 29473143)     

Parallel solution combustion synthesis for combinatorial materials studies

A parallel solution combustion synthesis technique was developed for combinatorial materials studies. The vigorous combustion reactions were successfully limited in the microreactors by using a substrate-net-mask microreactor system and the lowest adoptable furnace temperature. Using this technique, a luminescent materials library of Y3Al5O12/Tb(chi) was synthesized with the aid of an ink-jet delivery system. Structure and luminescence characterizations were implemented using X-ray diffraction and UV/X-ray spectroscopies, respectively. The results show that this technique is reliable and applicable to combinatorial study of powder materials with high synthesis temperature.