A “Mitsubishi emblem” tetrauclear aluminum complex containing two unsymmetric N2O2‐ligands and a symmetric NO3‐ligand as initiator for polymerization of rac‐lactide

A novel hydroxy‐, methoxy‐, and phenoxy‐bridge “Mitsubishi emblem” tetranuclear aluminum complex ( 1 ) is synthesized from an unsymmetric amine‐pyridine‐bis(phenol) N₂O₂‐ligand (H₂L¹) and a symmetric amine‐tris(phenol) NO₃‐ligand (H₂L²). Two same configuration chiral nitrogen atoms are formed in the tetranuclear Al complex upon coordination of the unsymmetric tertiary amine ligand to central Al. Complex 1 initiates controlled ring‐opening polymerization (ROP) of rac‐lactide and afford polylactide (PLA) with narrow molecular weight distributions (M_w/M_n = 1.05–1.19). The analysis of ¹H NMR spectra of the oligomer indicates that the methoxy group is the initiating group and the ring‐opening polymerization of lactide follows a coordination‐insertion mechanism. The Homonuclear decoupled ¹H NMR spectroscopy suggests the isotactic‐rich chains is preferentially formed in PLA. The study on kinetics of the ROP of lactide reveals the homopropagation rate is higher than the cross‐propagation rate, which is in agreement with the observed isotactic selectivity in the ROP of rac‐lactide. The stereochemistry of the polymerization was also supported by activation parameters. The introduction of unsymmetric ligand H₂L¹ has an effect on stereoslectivity of polymerization. This result may be of interest for the design of multinuclear metal complex catalysts containing functionalized ligands. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2084–2091     

A Novel Fission Process in Mini-emulsion RAFT Polymerization: Shell Crosslinked Nanoparticles as a Model

Shell crosslinked nanoparticles, prepared from copolymerization of styrene and disulfide crosslinker, using poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) as stabilizer and macroinitiator, exhibited a special fission behavior during the mini-emulsion RAFT polymerization process.     

Convenient Synthesis of 2,7-Diamino-9,9- bis(4-aminophenyl)fluorene

For the synthesis of 2,7-diamino-9,9-bis(4-aminophenyl)fluorene 2 , first 2,7-dinitro-9,9-bis(4-aminophenyl)fluorene 1 was synthesized by the reaction of 2,7-dinitro-9-fluorenone with aniline and aniline hydrochloride. 2 was obtained by the reduction of 1 with hydrazine hydrate and 10% palladium on carbon.     

From Nitro‐ to Sulfonyl‐Based Chromophores: Improvement of the Comprehensive Performance of Nonlinear Optical Dendrimers

Through the combination of the divergent and convergent approaches, coupled with the utilization of the powerful Sharpless “click‐chemistry” reaction, two series of sulfonyl‐based high‐generation NLO dendrimers were conveniently prepared with high purity and in satisfactory yields. Thanks to the perfect three‐dimensional (3D) spatial isolation from the highly branched structure and the isolation effect of the exterior benzene moieties and the interior triazole rings, these dendrimers exhibited large second harmonic generation coefficient (d₃₃) values up to 181 pm V^?1, which, to the best of our knowledge, is the highest value so far for polymers containing sulfonyl‐based chromophore moieties. Meanwhile, compared with the nitro‐chromophore‐based analogues, their optical transparency and NLO stability were improved in a large degree, due to the lower dipole moment (μ) and the special main‐chain structure of sulfonyl‐based chromophore in these dendrimers.     

3-取代-12-氧代-N,N-双(2-氯乙基)脱氧胆酰胺的合成及其抑制癌细胞活性

以7-脱氧胆酸(1)为原料,由Jones试剂氧化得到3,12-二氧代-7-脱氧胆酸(2),然后与双(2-氯乙基)胺反应,得到3,12-二氧代-N,N-双(2-氯乙基)-7-脱氧胆酰胺(4),进一步通过对化合物4中的3-位羰基进行官能团转换,得到2个3-位分别被肟基、缩胺硫腙基取代的12-氧代-N,N-双(2-氯乙基)-7-脱氧胆酰胺类型化合物。同时,初步测试了合成物对肿瘤细胞增殖抑制活性,结果表明,化合物对宫颈癌细胞的生长有显著的抑制活性。     

基于适体竞争机理的溶菌酶电化学传感器

制备了基于溶菌酶适体竞争机理的信号减弱型电化学传感器,在玻碳电极上修饰羧基化的多壁碳纳米管,将带有氨基的互补适体DNA连接到多壁碳纳米管上。由于道诺霉素崁入电极上的互补DNA,而产生电化学信号,当有目标物时,适体与结合力更高的溶菌酶结合,原本的互补链解链,导致插入双链的道诺霉素脱落,电化学信号减弱。以微分脉冲伏安法测定溶菌酶,响应的范围为1～500 nmol/L,相关系数0.999,检测下限为0.5 nmol/L(S/N=3)。     

硫代多联吡啶铂(Ⅱ)配合物的合成、性质及在光催化制氢中的应用

合成了2个新配体4-(4-硫代乙酸)甲苯基-6-苯基-2,2’-联吡啶HC^N^N(PhCH2SCOCH3)(L3)和6-(4-硫代乙酸)甲苯基-2,2’-联吡啶HC^N^N(CH2SCOCH3)(L5)及其发光的铂(Ⅱ)配合物ClPtC^N^N(PhCH2SCOCH3)(C3)和ClPtC^N^N(CH2SCOCH3)(C5).通过1H NMR谱和质谱对它们的结构进行了表征,采用X射线单晶衍射分析确定了C3的晶体结构.利用紫外-可见吸收光谱、发射光谱及激发态寿命测定研究了它们的光物理性质和电化学性质,以及配合物作为光敏剂在光催化制氢中的应用.通过系列配合物产氢效率的比较,揭示了它们的产氢效率和激发态寿命的关系.     

A Highly Sensitive and Selective Label-free Electrochemical Biosensor with a Wide Range of Applications for Bisphenol A Detection

A label-free DNA-based electrochemical biosensor owning high sensitivity and selectivity has been established for detecting bisphenol A in a wide range of applications. Coupling the high electrochemical performance of graphene oxide-thionine-Au nanomaterial with the specific binding capacity of the aptamers to BPA, the monitoring of trace amount of BPA was realized, the detection limit was 3.3 pg ⋅ mL⁻¹ with strong anti-interference. Besides, using molecular docking, it was found that BPA binds to the bases DC-49, DC-51, DG-52, DG-53 and DA-63 on the aptamer via hydrogen bonding and π-π stacking interactions. Finally, the biosensor had been successfully applied in different real samples.     

Highly Efficient Oxygen Reduction Reaction Fe-N-C Cathode in Long-durable Direct Glycol Fuel Cells

The oxygen reduction reaction in direct glycol fuel cells heavily relies on noble metal-based electrocatalysts. In this work, novel Pt group metal-free catalysts based on porous Fe-N-C materials are successfully synthesized as catalysts with high activity and durability for the cathode oxygen reduction reaction (ORR). Through the encapsulation of NH₄SCN salt, the surface elements and pore structure of the catalyst are effectively changed, and the active sites of Fe effectively are increased. The half-wave potential of the best Fe-N-C catalyst was –0.02 V vs. Hg/HgO in an alkaline environment. The porous Fe-N-C catalyst possesses a large specific surface area(1158 m²/g) and shows good activity and tolerance to glycol. The direct glycol fuel cell with the Fe-N-C cathode achieved a maximum power density of 62.2 mW/cm² with 4 mol/L KOH and 4 mol/L glycol solution at 25 °C and maintained discharge for more than 250 h at a 50 A/cm² current density.