The matrix equation AX-YB=C and related problems

The main result of the paper is a theorem, using which a new proof of Roth’s theorem is obtained, a new solvability criterion for the matrix equation AX-YB = C is proved, a formula for a particular solution of the latter is derived, and the least of the orders of square nonsingular matrices containing a given rectangular matrix as a submatrix is determined. Bibliography: 5 titles. __________ Translated from Zapiski Nauchnykh Seminarov POMI, Vol. 323, 2005, pp. 15–23.     

Dielectric and optical properties of polymer-liquid crystal composite

Dielectric properties of polymer-liquid crystal mixture, having constituent polymer, poly-butyl methacrylate (PBMA) and liquid crystal, cholesteryl nonanoate, are reported as a function of frequency and temperature. The measurement has been done in a temperature range of 300-375 K and frequency range of 100 Hz-10 MHz. The dielectric permittivity and dielectric loss shows significant changes with the addition of polymer molecules in liquid crystal. The significant feature of composite formation is that the pure liquid crystal and polymer do not show dielectric relaxation in the frequency range covered, while the composite shows relaxation peak at a particular frequency. The optical transmittance of pure liquid crystal and composite has also been measured and compared.     

Onset of crater formation during short pulse laser ablation

We report morphologic changes of metallic surfaces at the onset of ablation, starting from gentle ablation to the emergence of ablation craters. The evolution of both observed melting zones and of ablation craters therein are investigated in dependence of the ablation laser fluence for nanosecond ultraviolet laser pulses. Further, consequences of crater formation for cluster synthesis within the released atomic vapor are pointed out. PACS 52.38.Mf; 79.20.Ds; 65.40.De     

Analysis of packing factors of crystalline polymers in terms of the glass transition to melting temperature radio

An expression for the ratio of the glass transition temperature to the melting temperature, T _g/T _m, was derived with allowance for fluctuations of the packing factor in the amorphous state. This relationship made it possible to describe the actual range of variation in T _g/T _m depending on a change in the packing factor in the crystalline state k _{o, cr}. The proposed approach forms the basis for the method of determination of increments in the packing ratio k _{o, cr} and formulation of the principles of selection of experimental data for calculations. The glass transition temperatures in polyethylene depending on the type of unit cell were calculated.     

CONCEPTUAL DESIGN STUDIES OF AN 84 GHz, 500 kW, CW GYROTRON

The feasibility of an 84 GHz, 500 kW, CW gyrotron for ECRH on an experimental tokamak will be presented in this paper. Mode competition and mode selection procedures are carefully investigated by considering various candidate modes and the TE_10,4 mode is chosen as the operating mode. A conventional cylindrical cavity resonator with weak input and output tapers and parabolic roundings is considered for interaction studies. Self-consistent, both single mode and time-dependent, calculations are carried out and power and efficiencies are computed for a typical set of beam parameters. The results show that an output power of well over 500 kW, CW and efficiency around 40% can be reached without a depressed collector.     

Experimental intensity patterns obtained from a 2D shearing interferometer with adaptable sensitivity

The interferometric intensity patterns from a 2D shearing interferometer are shown and discussed. The intensity patterns can be obtained in two different approaches incorporating differential and extended wavefront controlled displacements. The reliable directional sensitivity of this interferometer allows the optimization of the measurement parameters to estimate the wavefront of the intensity patterns by regularization techniques.     

Electrochemical Recovery of Silver from Lead Alloys in Chloride Melts

Electrochemical separation of lead-silver alloys into the constituents by thin-layer electrolysis in molten electrolytes, with bismuth as metal separator, is studied. It is proposed to determine the extent of component recovery by potentiometry.     

Bilateral generating functions and operational methods

Bilateral generating functions are those involving products of different types of polynomials. We show that operational methods offer a powerful tool to derive these families of generating functions. We study cases relevant to products of Hermite polynomials with Laguerre, Legendre and other polynomials. We also propose further extensions of the method which we develop here.     

The energy conservation law for optical two-port devices

Optics and Spectroscopy - The relationship between the parameters of quadripoles (mirrors, for example) ensuring the fulfillment of the energy conservation law are considered. Apart from the...     

Characteristics of propagation of light beams in gyrotropic crystals

Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 54, No. 5, pp. 815–819, May, 1991.