New Synthetic Method of p-Nitrocalixarenes

Calixarenes 1 were directly nitrated with potassium nitrate and aluminum chloride to give p-nitrocalixarenes 2 in good yields. Formation of p-nitrocalix[4]arene (2a) from reaction of p-bromomethylcalix[4]arene (3) with silver nitrate is also described.     

Hydrogen Peroxide–Promoted Transformation of Thioureas/Thiosemicarbazides to Related Ureas/Semicarbazides at Room Temperature via Grinding

A novel and environmentally benign synthetic method for ureas through hydrogen peroxide–promoted desulfurization of thioureas at room tepemperature via grinding is reported. As compared with the traditional method, this one is manipulatively simple and the oxidant is low cost, highly active, and environmentally friendly.     

Prins Cyclization of Styrenes or Acetophenone Catalyzed by DBSA in Water

Dodecylbenzenesulfonic acid (DBSA) was proved to be an efficient catalyst for Prins cyclization of styrenes and formaldehyde or acetaldehyde in water. A tandem dehydration/Prins cyclization reaction using a tertiary alcohol and formaldehyde as substrates proceeded very well by using DBSA as catalyst. Acetophenone, which is less reactive compared with styrene, can also react with formaldehyde when catalyzed by DBSA in water to afford 1,3-dioxan-5-ylphenylmethanone in good yield.     

Cascade reaction for 3-pyrrolines and pyrroles from nitroallylic acetates and N-mesyl 2-aminoethanones

Cascade reactions of nitroallylic acetates with methanesulfonyl 2-aminoethanones affords either the 3-pyrrolines or the pyrroles in one pot depending on reaction solvents and temperature. A possible mechanism for the entire sequence is proposed.     

Synthesis of β,β′-edge fused, π-extended porphyrins and their applications in the dye-sensitized solar cells

Four π-extended, β,β′ aromatic ring fused porphyrins including mono- and opp-dibenzoporphyrins bearing two carboxyl groups at only one fused benzo group were synthesized. The optical results by UV–vis spectroscopy indicate that when compared with the absorption spectra of monobenzoporphyrins, greater light-harvesting capabilities can be realized for opp-dibenzoporphyrins with two benzo group at the opposite β,β′ positions of the porphyrin. The photovoltaic properties of these π-extended porphyrins were examined for the first time and the highest conversion efficiency of 1.62% was realized for opp-dibenzoporphyrin 8a-sensitized solar cell, which is ∼60% higher than that of monobenzoporphyrin 4a based solar cell indicating the effect of an extra aromatic π conjugation on the light-harvesting capabilities of π-extended porphyrins. Subsequent DFT calculation results supported our results obtained in the optical and photovoltaic studies.     

Phosphate Removal from Aqueous Solution by an Effective Clay Composite Material

Adsorption is an effective treatment process for removing phosphorus and thus controlling eutrophication. In this study, a clay composite material called Al–dolomite–montmorillonite (Al–DM) was prepared and characterized. Al–DM performed well with respect to phosphate removal, with its performance depending on the Al–DM loading, contact time, initial phosphorus concentration and initial solution pH. Adsorption mechanisms were investigated by conducting batch tests on phosphate adsorption using the Al–DM. The adsorption process fitted both the pseudo-second-order kinetics model and the intra-particle diffusion model. The Langmuir, Freundlich and BET models all adequately described the adsorption isotherm data. Thermodynamic studies showed that the adsorption process was endothermic and spontaneous in nature. Al–DM is an effective adsorbent for phosphate removal mainly due to its hierarchical porous structures as shown by characterization with SEM and EDS. Chemical changes occurring before and after adsorption in a water environment indicated that Al–DM had little negative effect on water quality.     

Preparation and Characterization of Styrene/Butyl Acrylate Emulsifier-Free Latex with 2-Acrylamido-2-Methyl Propane Sulfonic Acid as a Reactive Emulsifier

A kind of emulsifier-free latex (FL) was successfully synthesized from styrene (St) and butyl acrylate (BA) with 2-acrylamido-2-methyl propane sulfonic acid (AMPS) as a reactive emulsifier. The particle size of latex particles, stability against electrolytes, minimum film forming temperature (MFT) and water contact angle (CA) were evaluated and compared with a conventional latex (CL). Test results show that FL has larger particle size, better stability against electrolytes and lower MFT value compared with CL; higher AMPS content leads to smaller particle size and smaller water CA.     

Dispersion Mechanism of Superfine SiC Particles in the Different Condition Liquid

SiC@A1(OH)₃-Y(OH)₃ core-shell composite particles are synthesized by co-precipitation method for strengthening the antioxidation of SiC at high temperature. To reach better A1(OH)₃-Y(OH)₃ composite shell and higher coating ratio on the SiC particles surfaces, SiC particles must be adequately dispersed in the SiC suspension during the coating process. The dispersion mechanism of SiC particles is investigated by the sedimentation method. Through test and analysis, the optimum conditions of the dispersion of SiC particles in the SiC suspension are sedimentating for 10 minutes, ultrasonic dispersion for 10 minutes, the lower SiC concentration, pH = 9, the dispersant content for the 2% volume of SiC suspension and using the polyelectrolyte dispersant, respectively.     

The State of NaOH in NaOH/Poly(Sodium Acrylate) Composite

NaOH/poly(sodium acrylate) composites were prepared by in situ polymerization of acrylic acid with an overneutralization level by adding excess NaOH. The composites were studied by XRD, IR and ²³Na MAS NMR spectroscopy. The results showed that the high neutralization degree (>100%) may lead to a complete polymerization. Both XRD and ²³Na MAS NMR spectra did not show any peaks of phase-separated NaOH or Na₂CO₃ until the neutralization degree was up to 217.5%. It can be presumed that the aggregates of Na⁺ ions can contain approximately two Na⁺ units for every carboxyl group before the phase separation.     

Surface-Modified Sb2S3 Nanoparticles and Their Tribological Behaviors in Liquid Paraffin

Sb₂S₃ nanoparticles surface-modified with S-tetradecyl N, N-dihydroxyethyl dithiocarbamate (C₁₄DTC-Sb₂S₃) have been synthesized via extraction of Sb₂S₃ colloidal particles from ethylene glycol into toluene in the presence of C₁₄DTC. The obtained products were characterized by high-resolution transmission electron microscope (HRTEM) and Fourier transformation infrared (FTIR), and their tribological behaviors as an additive in liquid paraffin were investigated using a four-ball tribometer. The results show that C₁₄DTC-Sb₂S₃ nanoparticles can significantly improve the friction reduction, anti-wear, and load-carrying properties of base oils. The preliminary lubrication mechanism was discussed based on the SEM and XPS investigation of the rubbed surfaces.