Theoretical calculation of the steric effects of ortho substituents by the AM1 method

The AM1 calculation was done for ortho-substituted toluenes (o-X-C₆H₄-CH₃) and ortho-substituted tert-butylbenzenes (o-X-C₆H₄-t-Bu). The difference in the calculated heat of formation between o-X-C₆H₄-CH₃ and o-X-C₆H₄-t-Bu was used as a theoretical steric index for ortho-X. The correlation of this theoretical steric index with the empirical steric parameter sets such as our recently defined E_s(AMD) and the Taft–Kutter–Hansch (TKH) E_s was examined. In spite of the simplicity of the model system, the theoretical index was linear with the E_s(AMD) constant with a correlation coefficient of r = 0.972 for 17 substituents of various structures. Including the phenyl group, the correlation with the TKH E_s constant was r = 0.948. The theoretically calculated index was shown to serve as a measure of the ortho steric effect.     

Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

A twin optically-pumped far-infrared CH3OH laser for plasma diagnostics

A twin optically-pumped far-infrared CH₃OH laser has been constructed for use in plasma diagnostics. The antisymmetric doublet due to the Raman-type resonant two-photon transition is reproducibly observed at 118.8 m. With the 118.8-m line, it is obtained from the frequency separation of the anti-symmetric doublet that CH₃OH absorption line center is 16±1 MHz higher than the pump 9.7-m P(36) CO₂ laser line center. It is shown that the Raman-type resonant two-photon transition is useful in order to get several-MHz phase modulation for the far-infrared laser interferometer. Some preliminary performances of this twin laser for the modulated interferometer are described.This work was carried out under the collaborating research program at the Institute of Plasma Physics, Nagoya University, Nagoya 464, Japan.     

SPECTRAL ANALYSIS OF CHLOROPHYLL a AGGREGATES IN THE PRESENCE OF WATER-SOLUBLE MACROMOLECULES

Abstract— The absorption and fluorescence spectra of chlorophyll a (Chi a) aggregates formed in aqueous solutions of polyvinyl alcohol) (PVA), polyvinyl pyrrolidone) (PVP), and bovine serum albumin (BSA) were analyzed by curve-fitting methods in the wavelength region from 650 to 800 nm. The results indicated that the aggregation of Chi a to polymeric forms such as (Chia–2H₂0), was suppressed in the presence of the macromolecules. The suppression was due to a coordination of macromolecule bound ligands to Chi a and was strongest in BSA and weaker in PVA. There were differences in the spectra even though the same types of polymeric Chi a forms were observed due to characteristically different composition of these forms. Fluorescence patterns indicated that energy was transferred from the shorter to the longer wavelength forms.     

Chiral phosphinooxathiane ligands for catalytic asymmetric Diels-Alder reaction

Chiral cationic palladium[bond]phosphinooxathiane complexes have been found to be effective catalysts for enantioselective Diels-Alder (DA) reaction of cyclopentadiene with acyl-1,3-oxazolidin-2-ones to give the corresponding DA adducts in good yield and high enantioselectivity up to 93% ee.     

Ethylene and propylene polymerization behavior of a series of bis(phenoxy–imine)titanium complexes

This contribution reports ethylene and propylene polymerization behavior of a series of Ti complexes bearing a pair of phenoxy–imine chelate ligands. The bis(phenoxy–imine)Ti complexes in conjunction with methylalumoxane (MAO) can be active catalysts for the polymerization of ethylene. Unexpectedly, this C₂ symmetric catalyst produces syndiotactic polypropylene. ¹³C NMR spectroscopy has revealed that the syndiotacticity arises from a chain-end control mechanism. Substitutions on the phenoxy–imine ligands have substantial effects on both ethylene and propylene polymerization behavior of the complexes. In particular, the steric bulk of the substituent ortho to the phenoxy–oxygen is fundamental to obtaining high activity and high molecular weight for ethylene polymerization and high syndioselectivity for the chain-end controlled propylene polymerization. The highest ethylene polymerization activity, 3240 kg/mol-cat h, exhibited by a complex having a t-butyl group ortho to the phenoxy–oxygen, represents one of the highest reported to date for Ti-based non-metallocene catalysts. Additionally, the polypropylene produced exhibits a T_m, 140 °C, and syndioselectivity, rrrr 83.7% (achieved by a complex bearing a trimethylsilyl group ortho to the phenoxy–oxygen) that are among the highest for polypropylenes produced via a chain-end control mechanism. Hence, the bis(phenoxy–imine)Ti complexes are rare examples of non-metallocene catalysts that are useful for the polymerization of not only ethylene but also propylene.     

Electrochemically driven clathration/declathration of ferrocene and its derivatives by a nanometer-sized coordination cage

The electrochemical, NMR, and crystallographic studies clearly indicate that the clathration and declathration of ferrocene and its derivatives in a self-assmbled Pd(II)-linked nanometer-sized cage can be controlled by the oxidation state of the guest. Namely, the guests are clathrated when they are reduced but declathrated when they are oxidized. The process is rapid on the NMR time scale but slow on the CV time scale.     

Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

Inter- and intramolecular activation of aromatic C-H bonds by diphosphine and hydrido-bridged dinuclear iridium complexes

Reactions of [(Cp*Ir)2(mu-dmpm)(mu-H)2]2+ (1) with NaOtBu in aromatic solvent at room temperature give [(Cp*Ir)(H)(mu-dmpm)(mu-H)(Cp*Ir)(Ar)]+ [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furanyl (5a), 3-furanyl (5b)] via intermolecular aromatic C-H activation. Treatment of [(Cp*Ir)2(mu-dppm)(mu-H)2]2+ (2) with base (Et2NH) results in intramolecular C-H activation of the phenyl group in the dppm ligand to give [(Cp*Ir)(H){mu-PPh(C6H4)CH2PPh2}(mu-H)(Cp*Ir)]+ (6). The structures of 3, 5a, and 6 have been determined by X-ray diffraction methods.     

Aggregation and decomposition of a pseudoisocyanine dye in dispersions of layered silicates

The optical properties of reaction systems composed from a pseudoisocyanine (PIC) solution and dispersed layered silicates were studied using visible spectroscopy. Two series of reduced-charge montmorillonites were used as the silicate materials. Each series consisted of eight samples with different layer charges, which were prepared from one parent material. Observed trends were verified with another series of dioctahedral and trioctahedral smectites of different layer charges, structure, and origin. The layer charge density of the silicates significantly affected the aggregation of PIC cations. In addition to the formation of J-aggregates, dye spectral bleaching was also observed. Silicates with very low charge densities induced neither significant aggregation nor spectral bleaching of the dye. The highest levels of PIC J-aggregate formation were found in dispersions of the layered silicates with a medium surface charge. However, reversible spectral bleaching was also observed in some cases. PIC dye cations probably change their conformations during the adsorption process, due to the tension resulting from the large size of the cations and the relatively high charge density at the silicate surface. The bleached dye recovers, at least partially, with the rearrangement and redistribution of the dye cations over the time. In contrast, the presence of silicates with very high charge densities (synthetic taeniolite and fluorohectorite) led to the very fast and irreversible decomposition of the PIC. Perhaps, the tension in adsorbed dye cations, induced by the high charge density at the silicate surface, resulted in significant destabilization and a decomposition reaction of the chromophore.