Double-layer effects on simple electrode reactions III. The reduction of Eu3+ and Cr3+ in the presence of thiocyanate anions. Evidence for ligand bridging

The rates of reduction of Eu³⁺ and Cr³⁺ have been measured in mixed perchlorate + thiocyanate electrolytes at constant ionic strength, using low concentrations of thiocyanate to minimize its association with the cationic reactants. The effect of adsorbed thiocyanate anions on the reduction kinetics of Cr³⁺ resembled those produced by iodide and bromide on both Cr³⁺ and Eu³⁺. However, thiocyanate exhibited an unusual catalytic effect on the reduction of Eu³⁺ which was identified as arising from a reaction pathway involving thiocyanate-bridging between the mercury surface and the Eu³⁺. The diagnostic criteria used to support the proposed mechanism included analysis of the rate—potential behavior and of the effects of competitively adsorbed iodide ions upon the reduction rates.     

An insight into the aromaticity of fullerene anions: experimental evidence for diamagnetic ring currents in the five-membered rings of C(60)(6-) and C(70)(6-)

Reduction of the two "closed" [6,6] methanofullerenes, [6,6]C(61)H(2) (1) and [6,6]C(71)H(2) (5), to the corresponding hexaanions with lithium metal causes the bridgehead-bridgehead bonds to open, at least partially, and this change gives rise to diamagnetic ring currents in the resulting homoconjugated six-membered rings (6-MRs). These new ring currents shield the overlying hydrogen atoms on the methylene bridge and induce upfield shifts of 1.60 and 0.11 ppm in their (1)H NMR resonances, respectively. Analogous reduction of the already "open" [5,6]methanofullerenes, [5,6]C(61)H(2) (2) and [5,6]C(71)H(2) (3 and 4), only slightly enhances the shielding of the hydrogen atoms over the homoconjugated 6-MRs (upfield shifts of 0.13, 0.68, and 0.14 ppm, respectively) but leads to exceptionally strong diamagnetic ring currents in the homoconjugated five- membered rings (5-MRs), as evidenced by dramatic shielding of the hydrogen atoms situated over them (upfield shift of 5.01, 6.78, and 1.63 ppm, respectively). The strongest shielding is seen for the hydrogen atom sitting over the 5-MR at the pole of C(71)H(2)(6)(-) (delta = -0.255 ppm) indicating that the excess charge density is concentrated at the poles.     

Force field and 13C-NMR investigations of substituted cyclopentanes. A concept for the adaption of 13C NMR shifts to varying torsional arrangements in flexible conformers

MM2 Exploration of the conformational space for methylcyclopentane, in contrast to cyclopentanone yields more and flatter minima than known previously. Calculations of cyclopentanes with substituents X = F, Cl, CHMe₂, and CMe₃ with two stable conformations indicate <2° torsional angle changes with the different substituents. Cyclopentanes bearing not more than 2 substituents can accommodate all groups in pseudoequatorial positions without changing the basic envelope and twist chair geometries significantly. A model for ¹³C-shift calculation is proposed in which shift increments for the different torsional arrangements are obtained by linear interpolation between corresponding cyclohexane values. After correction for the nonequivalent carbon shifts in the hydrocarbon itself, again using the linear interpolation, a significant improvement of the shift correlations is observed. For disubstituted cyclopentanes these predict the shifts within ± 1.7 ppm with Me, CHMe₂, CMe₃, Cl, Br and OH as substituents. Configurational assignments are difficult with 1,3-di-substituted cyclopentanes, but straightforward with 1,2-di- and trisubstituted compounds. Thus, due to the presence of smaller torsional angles between, e.g. diequatorial vicinal substituents in the 1,2- cis series as compared to the trans compounds, the latter show deshielding, particularly at C2, by 1–4 ppm. Several epimers are stereo-selectively prepared by suitable ketone reduction and displacement methods.     

Adducts of N-terminal valines in hemoglobin with isoprene diepoxide, a metabolite of isoprene

Isoprene (2-methylbuta-1,3-diene) is a multi-site carcinogen in rodents. To evaluate the role of the diepoxide metabolite (1,2:3,4-diepoxy-2-methylbutane) in carcinogenesis, measurements of in vivo doses of the diepoxide are needed. The in vivo dose may be inferred from levels of reaction products with hemoglobin (Hb adducts). This report presents in vitro studies of the adduct formation by the diepoxide of isoprene with valinamide and oligopeptides as model compounds of N-terminal valines in hemoglobin (Hb). In the reaction with valinamide it was shown that isoprene diepoxide forms as the main product a ring-closed adduct, which is a pyrrolidine derivative [N,N-(2,3-dihydroxy-2-methyl-1,4-butadiyl)valinamide, MPyr-Val]. The analysis was performed by gas chromatography/mass spectrometry (GC/MS) (EI and PICI) after acetylation. The ring-closed adduct was also identified by liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS) as the main product in the reaction between isoprene diepoxide and standard hepta- or (2H8)octapeptides, corresponding to the N-terminal peptides of the alpha-chains in mouse and rat Hb. These peptides, alkylated with isoprene diepoxide, to be used as internal standards and calibration standards for quantification of MPyr-adduct levels in vitro and in vivo, were analyzed with respect to the degree of MPyr-alkylation by two independent methods, amino acid analysis and HPLC-UV; similar results were obtained using these methods. A method for measurement of Hb adducts as modified peptides, used earlier to measure a similar adduct to N-terminal valines in Hb from the diepoxide of 1,3-butadiene, has in the present work been tested for application to isoprene diepoxide. The method is based on tryptic degradation of globin and LC/ESI-MS analysis of N-terminal Pyr-heptapeptides of the Hb alpha-chain enriched by HPLC. MPyr-adduct levels in isoprene diepoxide alkylated hemolysate from mouse erythrocytes incubated with different concentrations of isoprene diepoxide (2 and 10 mM) for 1 h were quantified. The adduct level was about 50 nmol/g alpha-chain Hb per mM x h. From the adduct levels the rate constant of isoprene diepoxide for reaction with N-terminal valine was calculated to be about 1.6 times faster than for diepoxybutane.     

Studies on the extraction of chromium(VI) by ketones

A study of the extraction of chromium(VI) from aqueous media by ketones was made. Extraction of chromium was found to be most efficient from aqueous hydrochloric acid solutions. A mechanism for the extraction of chromium(VI) from aqueous hydrochloric acid solutions by methyl isobutyl ketone is proposed involving the formation of a receptor in the organic phase, the exchange of the chloride ion of the receptor for the anionic chromium(VI) species of the aqueous phase, and the solvation of the extracted chromium species. The differences in the abilities of various ketones to extract chromium(VI) from aqueous hydrochloric acid solutions, and the differences in the extraction of chromium (VI) from various aqueous acids by methyl isobutyl ketone are attributed to the differences in the formation of receptors.     

Thermal stability of alkali metal borates and alkaline earth metal borates

The correlation between the enthalpies of formation of alkali metal and alkaline earth metal borates and the composition of the vapor in equilibrium with their melts is considered. The thermal stabilities of the studied borates have been estimated. A method is suggested for determination of the relative composition of the vapor over borate melts on the basis of their enthalpies of formation.

---

Zusammenfassung Es wurde die Beziehung zwischen den Bildungsenthalpien von Alkali- (Erdalkali-)metallboraten und der Zusammensetzung der sich mit der Schmelze im Gleichgewicht befindlichen Gasphase betrachtet. Die thermische Stabilität der untersuchten Borate wurde geschätzt. Es wurde ein Verfahren entwickelt, die relative Zusammensetzung der Gasphase über Boratschmelzen auf Grund ihrer Bildungsenthalpien zu bestimmen.

     

Automated assignment of charge states from resolved isotopic peaks for multiply charged ions

The recent proliferation of electrospray as an ionization method has greatly increased the ability to perform analyses of large biomolecules by using mass spectrometry. The major advantage of electrospray is the ability to produce multiply charged ions, which brings large molecules down to a mass-to-charge ratio range amenable to most instruments. Multiple charging is also a disadvantage because mass (m) becomes ambiguous unless charge (z) can be assigned. This is typically performed with simple algorithms that use multiple peaks of the same m and different z, but these methods are difficult to apply to complex mixtures and not applicable when only one z appears for each m. The use of mass analyzers with higher resolving powers, like the Fourier transform mass spectrometer, allows resolution of isotopic peaks, providing an internal 1-Da mass scale that can be used for unambiguous charge assignment. Manual assignment of charge state from the isotopic peaks is time consuming and becomes inaccurate when either the signal level or resolving power are low. For these cases, computer algorithms based on pattern recognition techniques have been developed to assist in assignment of charge states to isotopic clusters. These routines provide for more rapid analysis with higher accuracy than available manually.     

Pyrolysis—mass spectrometry studies of atmospheric particles

Pyrolysis—mass spectrometry (Py—MS) as a taxonomic tool was applied to a series of atmospheric particulate samples. Seven pure and mixed source samples were individually pyrolyzed at 450°C directly into a mass spectrometer. The resulting spectra were summed and analyzed using an Euclidian Distance calculated from an n-dimensional array of peak intensity values weighted utilizing a Fisher ratioing procedure. The results of this study indicate that Py—MS can be used to distinguish various atmospheric particulate sources.     

Electron transfer reactions of cytochrome c at metal electrodes

The heterogeneous electron transfer reactions of cytochromec occurring at platinum, gold and mercury electrodes are shown to be quasi-reversible. In each case the electrodes have not been modified and the cytochromec samples are native. This work extends previous work and demonstrates that biological molecule electron transfer reactions can be studied at clean metal surfaces to gain fundamental knowledge of the mechanisms of these reactions.     

Extraction and characterization of adenovirus

A new methodology for the extraction and characterization of proteins from Coomassie-stained sodium dodecylsulfate polyacrylamide gel electrophoresis using matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) has been described. The utility of this methodology was demonstrated in the characterization of adenovirus proteins. The key steps in the extraction and destaining process involve washing the excised band with a combination of solvents that include 10% acetic acid, acetonitrile, methanol, and formic acid:water:isopropanol mixture. By using this procedure, we determined adenovirus proteins with molecular weights ranging from 10,000 to 110,000 Da by MALDI-MS, obtaining a detection limit of approximately 6 pmol. Parallel experiments were successfully carried out to analyze adenovirus proteins from Cu-stained gels. It was observed that increase in laser intensity resulted in significant improvements in the quality of MALDI mass spectra for the analysis of inefficiently destained proteins from Cu-stained gels.