Quantitative Medium-Resolution NMR Spectroscopy Under Non-Equilibrium Conditions,Studied on the Example of an Esterification Reaction

Medium-resolution nuclear magnetic resonance spectroscopy is a promising tool for the monitoring of liquid reactions. For process analytical applications, the requirements of robustness and insensitivity of the spectrometer in relation to high temperatures and pressures are challenging. Within this study, a flow probe using a glass dewar is presented. Temperatures of flowing samples up to 130 °C and pressures up to 40 bar were successfully applied, and the corresponding temperature loss of the flowing sample at 2 ml min^?1 was <2.4 °C at 130 °C. Furthermore, if the process requires a measurement in a non-equilibrium state of magnetization, a comprehensive data treatment is given. For this purpose, the influences of the flow and T ₁ of the substances under investigation are studied in detail on the example of a homogeneously catalyzed esterification. In addition, data analysis schemes were designed such that the experiments directly revealed mole fractions from the spectra. Limited spectral resolutions and low signal-to-noise ratio still did not obstruct quantitative interpretation of the experiments.     

Oxidative Phosphonylation of Aromatic Compounds

Abstract

Aryl phosphonates can be prepared in good yields from the respective arenes and tri- or dialkylphosphites by either chemical or electrochemical oxidation^1. The anodic oxidation proceeds either via phosphonium radical cations which then attack the arenes electrophilically or via arene radical cations which add the trialkyl-phosphite as nucleophile^1,2. Aryl phosphonates are also obtained in good yields by chemical oxidation with peroxidisulfate/AgNO₃, Iron(III)- or Cerium(IV)-complexes in acetonitrile/water or glacial acetic acid^3.     

A Convenient Method for the Large Scale Preparation of (E)-4-Oxo-2-Butenoic Acid Ethyl Ester

A one step synthesis of (E)-4-oxo-2-butenoic acid ethyl ester via the reaction of ethyl 2-ethoxy-2-hydroxyacetate and (formylmethylene)triphenylphosphorane is described. The method proceeds in good yield on a molar scale.     

First total synthesis of the marine steroid alkaloid plakinamine B

The first total synthesis of the marine steroid alkaloid plakinamine B (1) was accomplished in seven steps starting from known aldehyde 3. Key steps in this synthesis are the attachment of a vinylpyridine side chain by an aldol reaction, a chemoselective reduction of a pyridinium salt to a vinyl tetrahydropyridine, and the introduction of the 3α-methylamino group under Mitsunobu conditions. Plakinamine B and some of its precursors with amino or pyridinium side chains show significant antimicrobial activities.     

Heterogeneous platinum catalytic aerobic oxidation of cyclopentane-1,2-diols to cyclopentane-1,2-diones

A method for the aerobic oxidation of cyclopentane-1,2-diols to the corresponding diketones over a commercial heterogeneous Pt/C catalyst is described. Unsubstituted and 3- or 4-substituted cyclopentane-1,2-diols are oxidized to 1,2-dicarbonyl compounds in good yields under the reported optimized reaction conditions (atmospheric air, 1 mol % of catalyst, 1 equiv of LiOH, aqueous solvents and 60 °C temperature). The method is applicable for producing cyclopentane-1,2-diketones in a scalable manner.     

Stage-I fatigue crack studies in order to validate the dislocation-free zone model of fracture for bulk materials

Stage-I fatigue cracks are commonly described by the model of Bilby, Cottrell and Swinden (BCS model). However, since several experimental investigations have shown a dislocation-free zone (DFZ) in front of crack-tips, it is necessary to validate the new DFZ model and to examine the deviations to the BCS model. Therefore, the dislocation density distribution is derived from height profiles of slip lines in front of stage-I fatigue cracks in CMSX4® single crystals measured by contact-mode atomic force microscopy. This is possible, because the cracks are initiated at notches milled by focused ion beam technique directly on slip planes with a high Schmid factor. Consequently, the directions of the Burgers vectors are well known; it is possible to calculate the dislocation density distributions from the height profiles. The measured distributions are compared to the calculated distribution function of the DFZ model proposed by Chang et al. The additionally measured microscopic friction stress of the dislocations is then used to calculate the influence of grain boundaries on the dislocation density distribution in front of stage-I cracks. The calculation is done by the extended DFZ model of Shiue et al. and compared with the measured distribution function in polycrystalline specimens. Finally, the crack-tip sliding displacement as a measure for the crack propagation rate is compared for the DFZ model and the BCS model with the experimentally revealed values. The important result: the often used BCS model does not reflect the experimental measurements. On the contrary, the DFZ model reflects the measurements at stage-I cracks qualitatively and quantitatively.     

Wastes from Wood Extraction Used in Composite Materials: Behavior after Accelerated Weathering

New materials were obtained by incorporating in polypropylene (PP) matrix 60% wood wastes resulting after extraction with supercritical carbon dioxide, water, and ethanol. Structural, mechanical, thermal, and rheological characterizations, as well as moisture uptake of the composites, were evaluated before and after accelerated weathering. It was found that the extraction method influenced the composite properties due to the hydrophilic-hydrophobic balance. The addition of extracted fibers results in an increase in hardness and tensile properties and a decrease of impact strength as compared to PP.