The mechanism of sonochemical degradation of a cationic surfactant in aqueous solution

The sonochemical degradation of the cationic surfactant, laurylpyridinium chloride (LPC), in water was studied at concentrations of 0.1-0.6 mM, all below its critical micelle concentration (15 mM). It has been found that the initial step in the degradation of LPC occurs primarily by a pyrolysis pathway. Chemical analysis of sonicated solutions by gas chromatography, electrospray mass spectrometry, and high performance liquid chromatography reveals that a broad range of decomposition products, hydrocarbon gases and water-soluble species, are produced. Propionamide and acetamide were identified as two of the degradation intermediates and probably formed as the result of the opening of the pyridinium ring following OH radical addition. Most of the LPC is eventually converted into carboxylic acids. The complete mineralization of these carboxylic acids by sonolysis is however a comparatively slow process due to the hydrophilic nature of these low molecular weight products.     

Time-domain simulations of sound propagation through screen-induced turbulence

A flow model in combination with a statistical-dynamical turbulence generator and a linearised Euler time-domain model for sound waves were used to simulate the effect of screen-induced turbulence on the noise level in the acoustical shadow of a screen in wind. Instead of simulating a great number of different frozen turbulence realisations, the concept of transient turbulence was successfully tested and applied. This concept is adequate to the time-domain model and reduces the computational demands. Several two-dimensional simulations allowed to isolate the individual effects of wind and screen on the propagation of 500 Hz sound waves over a 4-m high noise barrier. At a distance of 250 m from the source (240 m behind the screen) the sheltering effect of the screen and the refraction effect of the wind are in the order of 6 and 4 dB, respectively. The screen-induced turbulence leads to fluctuations in the noise level with a standard deviation of 1.2 dB and a maximum amplitude of 3 dB. However, the time averaged effect turned out to be in the order of merely 0.2 dB. The effect of the screen-induced turbulence on the average noise level behind the screen is therefore negligible.     

Iterative regularization methods for atmospheric remote sensing

In this paper we present different inversion algorithms for nonlinear ill-posed problems arising in atmosphere remote sensing. The proposed methods are Landweber's method (LwM), the iteratively regularized Gauss-Newton method, and the conventional and regularizing Levenberg-Marquardt method. In addition, some accelerated LwMs and a technique for smoothing the Levenberg-Marquardt solution are proposed. The numerical performance of the methods is studied by means of simulations. Results are presented for an inverse problem in atmospheric remote sensing, i.e., temperature sounding with an airborne uplooking high-resolution far-infrared spectrometer.     

Shock-wave velocity of a femtosecond-laser-produced plasma

Fluorescence measurements have been used to characterize the velocity of atoms in a femtosecond-laser-produced plasma. Nanogram amounts of a copper sample were ablated by the focused radiation (λ=775 nm) of an all-solid-state laser. The laser was operated at a pulse rate of 10 Hz with an energy of 200μJ per pulse. The microplasma expanded into a defined argon atmosphere of pressures between 0.02 and 850 mbar. Atomic fluorescence was excited in the laser plume by a dye-laser pulse with the wavelength set to the line Cu I 282.4 nm. The narrowed beam of the dye-laser was directed into the plasma at different heights above the sample surface. The fluorescence radiation was measured with an échelle-spectrometer, equipped with an intensified-charge-coupled device as the detector. The velocity depends strongly on the pressure of the ambient atmosphere and the distance from the sample surface. The highest velocity found at an argon pressure of 0.02 mbar was 1.0×10⁶ cm s⁻¹.     

Transverse momentum distributions of neutral pions from central and peripheral16O+Au collisions at 200A·GeV

The production of neutral pions by the interaction of 200A·GeV p and¹⁶O projectiles with a Au target has been studied in the pseudorapidity range 1.5≦η≦2.1. Transverse momentum spectra have been measured between 0.4 GeV/c and 3.6 GeV/c and their dependence on the centrality of the collision has been investigated. The peripheral-collision spectra display a marked change of slope with a hard component starting at about 1.8 GeV/c, in contrast to central-collision data. The data are discussed in comparison to p+p and α+α data from the ISR.     

Synthesis and characterization of a nano-scaled barium cerate perovskite powder using starch as polymerization agent

The preparation of nano-sized BaCeO₃ powder using starch as a polymerization agent is described herein. Phase evolution during the decomposition process of a (BaCe)-gel was monitored by XRD. A phase-pure nano-sized BaCeO₃ powder was obtained after calcining of the (BaCe)-gel at 920 °C. The resulting powder has a specific surface area of 15.4 m²/g. TEM investigations reveal particles mainly in the size range of 30 to 65 nm. The shrinkage and sintering behavior of resulting powder compacts were studied in comparison to a coarse-grained mixed-oxide BaCeO₃ powder (S_BET = 2.1 m²/g). Dilatometric measurements show that the beginning of shrinkage of compacts from the nano-sized powder is downshifted by 300 °C compared to mixed-oxide powder. Compacts from the nano-sized powder reach a relative density of 91% after sintering at 1450 °C for 10 h.     

Gold-surface binding of molecular switches studied by M?ssbauer spectroscopy

The nonanuclear coordination compound [Mo^IV{(CN)Fe^III(3-methyl-saldptn)}₈]Cl₄ exhibits multiple spin transitions (3-methyl-saldptn = N,N′-bis(3′′-methyl-2′′-hydroxy-benzyliden)-1,7-diamino-4-azaheptane). This spin crossover cluster is bound via a self-assembled monolayer onto a two dimensional array gold surface. M?ssbauer spectroscopy indicates that the thermally and optically induced spin crossover of the compound is maintained. Thereby, the foundation for its potential practical application (e.g. in the field of information storage) was laid.     

Effective interactions of colloids on nematic films

The elastic and capillary interactions between a pair of colloidal particles trapped on top of a nematic film are studied theoretically for large separations d. The elastic interaction is repulsive and of quadrupolar type, varying as d^-5. For macroscopically thick films, the capillary interaction is likewise repulsive and proportional to d^-5 as a consequence of mechanical isolation of the system comprised of the colloids and the interface. A finite film thickness introduces a nonvanishing force on the system (exerted by the substrate supporting the film) leading to logarithmically varying capillary attractions. However, their strength turns out to be too small to be of importance for the recently observed pattern formation of colloidal droplets on nematic films.