Zur photochemischen (Z)⇆(E)-Isomerisierung von Gallenpigment-Partialstrukturen

The photochemical (Z)?(E) isomerization of the exocyclic double bond is only possible in pyrromethenones (partial structure1) but not in2–4. From spectral investigations, chelation and methylation of certain positions within these structures it can be shown that it is most probably a proton transfer reaction which competes successfully with the isomerization.     

Sonoluminescence quenching of organic compounds in aqueous solution: frequency effects and implications for sonochemistry

Solute-induced quenching of sonoluminescence (SL) is reported for aqueous solutions of two homologous series of methyl esters and ketones using low (20 kHz) and high (515 kHz) ultrasound frequencies. SL data at 20 kHz from aqueous solutions containing alcohols and carboxylic acids are also presented to compare with previously published results at 515 kHz. In addition to supporting the previous findings on the existence of stable and transient bubbles at 515 and 20 kHz, respectively, the results suggest that the hydrogen-bonding characteristics of the solutes also play a major role in the extent of SL quenching. An increase in the SL intensity at low concentrations for most of the solutes suggests that these solutes increase the number of "active" bubbles by hindering the coalescence of bubbles. It is concluded that the effect of the solutes on the SL signal from aqueous solutions at both frequencies is primarily due to the balance of two factors, namely, the incorporation of solute within the bubble, leading to SL quenching, and the prevention of coalescence of the bubbles, leading to SL enhancement. At the higher frequency, SL quenching by the solutes is the main influence on the emission yield. However, at the lower frequency, hindrance to coalescence by the solutes dominates at lower concentrations and leads to SL enhancement. The implications of these results for optimizing conditions for aqueous sonochemical reactions are discussed.     

Reaktive E = C(p-p)π-Systeme. XLII [1]. Neue Koordinationsverbindungen des 2-(Diisopropylamino)-1-phosphaethins: [{η4-(iPr2NCP)2}Ni{η2-(iPr2NCP)}], [(Ph3P)2Pt{η2-(iPr2NCP)}] und [Co2(CO)6{η2-η2-(iPr2NCP)}]

Reactive E = C(pp)π-Systems. XLII [1]. Novel Coordination Compounds of 2-(Diisopropylamino)-1-phosphaethyne: [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}], [(Ph₃P)₂Pt{η²-(iPr₂NCP)}], and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] 2-(Diisopropylamino)-phosphaethyne iPr₂N? C?P ( 2 ) reacts with the Ni(0)-complexes [Ni(1,5-cyclooctadiene)₂] and [Ni(CO)₃(1-azabicyclo[2.2.2]octane)], respectively, to give the novel complex [{η⁴-(iPr₂NCP)₂}Ni{η²-(iPr₂NCP)}] ( 5 ), with the 1,3-diphosphacyclobutadiene derivative and 2 (side-on) as π-ligands. The molecular structure of 5 determined by X-ray diffraction on single crystals proves the spin systems and rotational barriers deduced from NMR-data (¹H, ¹³C-, ³¹P). The PC distances of the four-membered ring of 1.817(2) and 1.818(2) Å – as expected – are considerably longer than the PC bond of the η²-coordinated phosphaalkyne 2 [1.671(2) Å]. – In the reactions of 2 with [(Ph₃P)₂Pt(C₂H₄)] or [Co₂(CO)₈] the ligand properties of 2 resemble those of alkynes affording the complexes [(Ph₃P)₂Pt{η²-(iPr₂NCP)}] ( 7 ) with side-on coordinated 2 and [Co₂(CO)₆{η²-μ²-(iPr₂NCP)}] with 2 acting as a 4e donor bridge in quantitative yield. In attempts to prepare copper(I) complexes of the aminophosphaalkyne 2 by reaction with CuCl or CuI the only isolable product formed in reasonable amounts under the influence of air and moisture is the 1 λ³, 3 λ⁵-diphosphetene (iPr₂N) ( 10 ) (isolated yield: ca. 20%). The crystal structure analysis of 10 indicates a strong structural relationship to the diamino-2-phosphaallyl cation [Me(iPr₂N)]⁺ ( 12 ), the 1,3-diphosphacyclobutadiene ligand (iPr₂NCP)₂ in the binuclear complex [{η¹, μ²-(iPr₂NCP)₂}Ni₂(CO)₆] ( 3a ) as well as to the heterocycles (dme)₂LiOE₂′ (E′ = S, 11a ; E′ = Se, 11b ) prepared by Becker et al. [11b, 35].     

Gas-Phase cationization and protonation of neutrals generated by matrix-assisted laser desorption

The ionization mechanisms involved in matrix-assisted ultraviolet laser desorption/ionization (MALDI) were studied with a time-of-flight mass spectrometer. When protonated or cationized quasimolecular ions generated by MALDI are not extracted promptly, their abundance is a function of the delay time between laser irradiation and ion extraction, maximizing at an optimum delay time (DTM) of a few hundred nanoseconds. The ion abundance at DTM exceeds that of prompt extraction by a factor of 2 or more. Increasing the cation density near the sample surface reduces the DTM, whereas increasing the desorption laser irradiance has the opposite effect. The enhancement suggests extensive gas-phase ion-molecule reactions after irradiation by the desorption laser has ceased.     

Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques

The mechanical properties of hybrid materials consisting of polystyrene (PS), which was cross-linked with different proportions of the multifunctional cluster Zr₆O₄(OH)₄(methacrylate)₁₂ (Zr6) were investigated. With the help of (micro)indentation and scratch testing, the influence of the Zr6 clusters on mechanical properties, such as hardness, stiffness, creep, craze initiation, and scratch resistance was shown. There was only a slight increase in hardness and in indentation modulus with higher cluster loadings. While this observation was in agreement with the compression behaviour of the materials, the tensile properties showed a much stronger dependence on the Zr6 content. With increasing cluster loading, an increase of craze initiation stress, as determined by ball indentation experiments, was found. Performing scratch testing with constant load, a reduction of pile-up and a stronger recovery were observed for the hybrid materials compared to the neat PS. Scratch tests with a constant increase of load showed an increase of the critical load for crack opening during scratching.     

Propene polymerization using homogeneous MAO-activated metallocene catalysts: Me2Si(Benz[e]Indenyl)2ZrCl2/MAO vs. Me2Si(2-Me-Benz[e]Indenyl)2ZrCl2/MAO

Propene was polymerized at 40°C and 2-bar propene in toluene using methylalumoxane (MAO) activated rac-Me₂Si(Benz[e]Indenyl)₂ZrCl₂ ( BI ) and rac-Me₂Si(2-Me-Benz[e]Indenyl)₂ZrCl₂ ( MBI ). Catalyst BI /MAO polymerizes propene with high activity to afford low molecular weight polypropylene, whereas MBI /MAO is less active and produces high molecular weight polypropylene. Variation of reaction conditions such as propene concentration, temperature, concentration of catalyst components, and addition of hydrogen reveals that the lower molecular weight polypropylene produced with BI /MAO results from chain transfer to propene monomer following a 2,1-insertion. A large fraction of both metallocene catalyst systems is deactivated upon 2,1-insertion. Such dormant sites can be reactivated by H₂-addition, which affords active metallocene hydrides. This effect of H₂-addition is reflected by a decreasing content of head-to-head enchainment and the formation of polypropylene with n-butyl end groups. Both catalysts show a strong dependence of activity on propene concentration that indicates a formal reaction order of 1.7 with respect to propene. MBI /MAO shows a much higher dependence of the activity on temperature than BI /MAO. At elevated temperatures, MBI /MAO polymerizes propene faster than BI /MAO. © 1995 John Wiley & Sons, Inc.     

The Elusive beta-unsubstituted calix[5]pyrrole finally captured

[reaction: see text] The meso-decamethyl-calix[5]pyrrole 2b was synthesized from the furan-based analogue 1b via the homologation of the furan rings to pyrrole, and its solid-state structure was determined by X-ray crystallography: surprisingly, the binding constant of 2b toward chloride is found to be lower than that of the tetrameric analogue 2a.     

1,4-dimethyl-3,6-dioxo-1,2,4,5-tetrazin-1-IUM-5(4h)-id,a new six-membered heterocyclic betaine

The preparation, the spectroscopic characterization, the crystal structure and chemical reactions of the new six-membered heterocyclic betaine2 are reported; 2 is a representative of a possibly large group of yet unkonwn betaines of the general structure 8.     

The Adamantane Rearrangement of 1,2endo-Trimethylenenorbornane. Preliminary communication

1,2endo-Trimethylenenorbornane (1) in the presence of aluminium bromide in carbon disulfide at ?60° isomerizes at a much higher rate than its 2exo-isomer 2 to 2endo, 6endo-trimethylenenorbornane (3) as the sole product. By consequence, the hydrocarbon 2 being the next intermediate in the sequence of the adamantane rearrangement of 1 seems to be very unlikely.     

1D and 2D Systems Derived from Polynuclear [ ML(N 3) 2] n ( M?=?Zn(II) or Cd(II) and L is 2-Picoline- N-oxide or 4-Methylpyrimidine)

Four new polynuclear complexes: [Zn(2picNO)(N₃)₂]_n, [Zn(4Mepym)(N₃)₂]_n, [Cd(2picNO)(N₃)₂]_n, and [Cd(4Mepym)(N₃)₂]_n (2picNO=2-picoline-N-oxide and 4Mepym=4-methylpyrimidine) have been synthesized and characterized by single-crystal X-ray diffraction. The structures of the zinc(II) complexes feature five-coordinate zinc atoms, (-1,1) azido bridges, monodentate organic ligands, and 1D chains. The cadmium(II) azide complexes contain distorted octahedral metal atoms linked by alternate di-(-1,1) and di-(-1,3) azido bridges in cis arrangement and these chains are connected by 2picNO bridges giving a honeycomb 2D framework or by 4Mepym bridges forming extended 2D network structure.