Effects of thermal annealing on the viscoelastic properties and morphology of bimodal hard/soft latex blends

The effects of thermal annealing on the viscoelastic properties and morphology of films prepared from bimodal latex blends containing equal weight fractions of soft and hard latex particles with controlled sizes were investigated. The thermal and viscoelastic properties of as‐dried and annealed samples were investigated with differential scanning calorimetry and dynamic mechanical analysis (DMA). Throughout the thermal annealing, the latex blend morphologies were also followed with atomic force microscopy and transmission electron microscopy (TEM). A particulate morphology, consisting of hard particles evenly dispersed in a continuous soft phase, was observed in the TEM micrographs of the as‐dried latex blends and resulted in an enhancement of the mechanical film properties at temperatures between the α relaxations of the soft and hard phases in the DMA thermograms. As soon as the thermal annealing involved temperatures higher than the glass‐transition temperature of the hard phase, the hard particles progressively lost their initial spherical shape and formed a more or less continuous phase in the latex blends. This induced coalescence of the hard particles was confirmed by the association of the experimental viscoelastic data with theoretical predictions, based on self‐consistent mechanical models, which were performed by the consideration of either a particulate or cocontinuous morphology for the bimodal latex blends. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2289–2306, 2005     

Increased melanogenesis is a risk factor for oxidative DNA damage--study on cultured melanocytes and atypical nevus cells

Melanin synthesis is an oxygen-dependent process that acts as a potential source of reactive oxygen species (ROS) inside pigment-forming cells. The synthesis of the lighter variant of melanin, pheomelanin, consumes cysteine and this may limit the capacity of the cellular antioxidative defense. We show that tyrosine-induced melanogenesis in cultured normal human melanocytes (NHM) is accompanied by increased production of ROS and decreased concentration of intracellular glutathione. Clinical atypical (dysplastic) nevi (DN) regularly contain more melanin than do normal melanocytes (MC). We also show that in these cultured DN cells three out of four exhibit elevated synthesis of pheomelanin and this is accompanied by their early senescence. By using various redox-sensitive molecular probes, we demonstrate that cultured DN cells produce significantly more ROS than do normal MC from the same donor. Our experiments employing single-cell gel electrophoresis (comet assay) usually reveal higher fragmentation of DNA in DN cells than in normal MC. Even if in some cases the normal alkaline comet assay shows no differences in DNA fragmentation between DN cells and normal MC, the use of the comet assay with formamidopyrimidine DNA glycosylase can disclose that the DNA of the cultured DN cells harbor more oxidative damage than the DNA of normal MC from the same person.     

Site-selective guest inclusion in molecular networks of butadiyne-bridged pyridino and benzeno square macrocycles on a surface

We present here the formation of a modular 2D molecular network composed of two different types of square-shaped butadiyne-bridged macrocycles, having intrinsic molecular voids, aligned alternately at the solid-liquid interface. Site-selective inclusion of a guest cation took place at every other molecular void in the molecular network with two different recognition sites.     

Adsorption of molecular brushes with polyelectrolyte backbones onto oppositely charged surfaces: a self-consistent field theory

The two-gradient version of the Scheutjens-Fleer self-consistent field (SF-SCF) theory is employed to model the interaction between a molecular bottle brush with a polyelectrolyte backbone and neutral hydrophilic side chains and an oppositely charged surface. Our system mimics graft-copolymers with a cationic main chain (among which poly( L-lysine)- graft-poly(ethylene glycol) (PLL- g-PEG) or poly( L-lysine)- graft-polyoxazoline are well-known examples) interacting with negatively charged (metal oxide) solid surfaces. We aim to analyze the copolymer-surface interaction patterns as a function of the molecular architecture parameters. Two regimes are investigated: First, we compute the effective interaction potential versus the distance from the surface for individual bottle brush macromolecules. Here, depending on the grafting ratio and the degree of polymerization of the side chains, the interplay of electrostatic attractions of the main chain to the surface and the steric repulsion of the grafts results in different patterns in the interaction potential and, therefore, in qualitatively different adsorption behavior. In particular, we demonstrate that, at high side chain grafting density and short grafts, the molecular brushes are strongly adsorbed electrostatically onto negatively charged substrates, whereas, in the opposite case of low grafting ratio and high molecular weight of grafts, the steric repulsion of the side chains from the surface dominates the polymer-surface interaction. At intermediate grafting ratios, the adsorption/depletion scenario depends essentially on the ratio between the electrostatic screening length and the thickness of the molecular bottle brush. We further have analyzed the equilibrium adsorbed amount as a function of the macromolecular architecture. Our results are based on a detailed account of attractive and repulsive (including intermolecular in-plane) interactions, and suggest a nonmonotonic dependence of the adsorbed amount on the grafting ratio, in good agreement with the experimental studies for PLL- g-PEG adsorption onto Nb2O5 surfaces. The results of the theoretical modeling are discussed in the context of the optimization of the PLL-g-PEG molecular design parameters in order to create protein-resistant surfaces.     

Gentle immobilization of nonionic polymersomes on solid substrates

Vesicles from Pluronic L121 (PEO5-PPO68-PEO5) triblock copolymers were first stabilized by a permanent interpenetrating polymer network and then gently immobilized onto a glass or mica surface. Fluorescence-labeled micrometer-sized vesicles were visualized with confocal laser scanning microscopy, and smaller sized capsules, around 100 nm, were probed by liquid atomic force microscopy. The immobilized vesicles were weakly attached to a negatively charged surface via negatively charged polyelectrolytes in combination with Mg2+ ions and can be reversibly detached from the surface by slightly elevated temperatures. To illustrate that the immobilized vesicles remain responsive to external stimuli, we show that it is possible to transform their shape from spherical to cylindrical by introducing a second Pluronic, namely, P123 (PEO20-PPO70-PEO20). The detailed transition process has been recorded in real time by confocal laser scanning microscopy. Electron microscopy studies confirmed that a similar morphology change also occurs in the bulk.     

Improved fatty acid detection in micro-algae and aquatic meiofauna species using a direct thermal desorption interface combined with comprehensive gas chromatography-time-of-flight mass spectrometry

Comprehensive two-dimensional gas chromatography (GC x GC) with time-of-flight mass spectrometry detection is used to profile the fatty acid composition of whole/intact aquatic microorganisms such as the common fresh water green algae Scenedesmus acutus and the filamentous cyanobacterium Limnothrix sp. strain MRI without any sample preparation steps. It is shown that the technique can be useful in the identification of lipid markers in food-web as well as environmental studies. For instance, new mono- and diunsaturated fatty acids were found in the C(16) and C(18) regions of the green algae S. acutus and the filamentous cyanobacterium Limnothrix sp. strain MRI samples. These fatty acids have not, to our knowledge, been detected in the conventional one-dimensional (1D) GC analysis of these species due to either co-elution and/or their presence in low amounts in the sample matrix. In GC x GC, all congeners of the fatty acids in these microorganisms could be detected and identified due to the increased analyte detectability and ordered structures in the two-dimensional separation space. The combination of direct thermal desorption (DTD)-GC x GC-time-of-flight mass spectrometry (ToF-MS) promises to be an excellent tool for a more accurate profiling of biological samples and can therefore be very useful in lipid biomarker research as well as food-web and ecological studies.     

Competitive adsorption of nonionic surfactant and nonionic polymer on silica

Competitive adsorption of the nonionic polymer poly(ethylene oxide) (PEO) and the nonionic surfactant of the type poly(ethylene oxide) alkyl ether from aqueous solutions on a silica surface is examined. From one-component solutions, both species readily adsorb onto silica and, in the bulk of mixed (two-component) solutions, polymer-surfactant complexes are not observed. Because both species bind by the same mechanism to silica, subtle differences in layer structure, or other species-specific parameters, determine whether one or both of the species will adsorb. It was found that various surfactants can displace PEO up to a certain critical molecular weight. Surfactants with a high aggregation number, in bulk and on the surface, can displace PEO with a higher molar mass than surfactants with a low aggregation number. As the molar mass of the polymer increases, the time a surfactant needs to completely displace the polymer increases. We can explain both the existence of the critical molar mass and the decrease in adsorption kinetics with a shift in the critical surface association concentration (CSAC).     

Structural, photophysical, and photochemical characterization of 9-anthracenecarboxylate-hydrotalcite nanocomposites: evidence of a reversible light-driven reaction

ZnAl hydrotalcites containing increasing amounts of 9-anthracenecarboxylate anion (9AC) have been obtained via an anion-exchange procedure. In particular, intercalated and/or surface-exchanged samples were prepared to study the effect of the chromophore packing on their photophysical and photochemical behavior. Surface-exchanged samples were obtained by equilibrating the carbonate form of the ZnAl hydrotalcite with dilute solutions of 9AC. The nitrate form of the ZnAl hydrotalcite was instead chosen for the preparation of intercalation compounds. The maximum loading of 9AC was found to be 44% of the anion-exchange capacity. The obtained nanostructured materials were characterized by chemical and thermal analysis and X-ray powder diffractometry and studied for their photophysical and photochemical properties. The absorption and emission spectra of the materials revealed the formation of 9AC aggregates. The time-resolved fluorescence properties of the hybrid materials were investigated in bulk and under space-resolved conditions. The fluorescence decays appeared to be quite complex and were affected by the microenvironment and the experimental conditions. Generally, a shortening of the main fluorescence decay component was observed with increasing matrix loading, thus suggesting the occurrence of nonradiative processes in competition with fluorescence at high chromophore concentrations. Indeed, the occurrence of an electron-transfer process to water molecules, which led to the formation of 9AC radical, was observed spectrophotometrically in the sample with high 9AC loading. The electron-transfer process was completely reversible under air-equilibrated conditions.     

Fluorescent perylene diimide rotaxanes: spectroscopic signatures of wheel-chromophore interactions

[2]- and [3]-rotaxanes with a tetraphenoxy perylene diimide core were synthesized. Hydrogen bonding between the wheel and the imide changes the optical properties of the perylene chromophore: the absorption and fluorescence spectra are red-shifted. The decay times of the rotaxanes are shorter in comparison with that of the axle. Single molecule fluorescence measurements reveal relatively narrow distributions of emission maxima and decay times. The averages are in agreement with ensemble measurements. The observed red shifts make the perylene diimide a suitable chromophore for sensing the position of the wheel on the axle.